cvw/pipelined/src/wally/wallypipelinedsoc.sv

///////////////////////////////////////////
// wally-pipelinedsoc.sv
//
// Written: David_Harris@hmc.edu 6 November 2020
// Modified: 
//
// Purpose: System on chip including pipelined processor and memories
// Full RV32/64IC instruction set
//
// Note: the CSRs do not support the following features
//- Disabling portions of the instruction set with bits of the MISA register
//- Changing from RV64 to RV32 by writing the SXL/UXL bits of the STATUS register
// As of January 2020, virtual memory is not yet supported
//
// A component of the CORE-V-WALLY configurable RISC-V project.
// 
// Copyright (C) 2021-23 Harvey Mudd College & Oklahoma State University
//
// SPDX-License-Identifier: Apache-2.0 WITH SHL-2.1
//
// Licensed under the Solderpad Hardware License v 2.1 (the “License”); you may not use this file 
// except in compliance with the License, or, at your option, the Apache License version 2.0. You 
// may obtain a copy of the License at
//
// https://solderpad.org/licenses/SHL-2.1/
//
// Unless required by applicable law or agreed to in writing, any work distributed under the 
// License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, 
// either express or implied. See the License for the specific language governing permissions 
// and limitations under the License.
////////////////////////////////////////////////////////////////////////////////////////////////

`include "wally-config.vh"

module wallypipelinedsoc (
  input  logic 		   clk, reset_ext, 
  output logic       reset,
  // AHB Lite Interface
  // inputs from external memory
  input  logic [`AHBW-1:0]  HRDATAEXT,
  input  logic 		   HREADYEXT, HRESPEXT,
  output logic 		   HSELEXT,
  // outputs to external memory, shared with uncore memory
  output logic 		   HCLK, HRESETn,
  output logic [`PA_BITS-1:0] HADDR,
  output logic [`AHBW-1:0] HWDATA,
  output logic [`XLEN/8-1:0] HWSTRB,
  output logic 		   HWRITE,
  output logic [2:0] 	   HSIZE,
  output logic [2:0] 	   HBURST,
  output logic [3:0] 	   HPROT,
  output logic [1:0] 	   HTRANS,
  output logic 		   HMASTLOCK,
  output logic 		   HREADY,
  // I/O Interface
  input  logic       TIMECLK,
  input logic [31:0] 	   GPIOPinsIn,
  output logic [31:0] 	   GPIOPinsOut, GPIOPinsEn,
  input logic 		   UARTSin,
  output logic 		   UARTSout,
  input logic 		   SDCCmdIn,
  output logic 		   SDCCmdOut,
  output logic 		   SDCCmdOE,			  
  input logic [3:0] 	   SDCDatIn,
  output logic 		   SDCCLK			  
);

  // Uncore signals
//  logic 		   reset;
  logic [`AHBW-1:0] HRDATA;   // from AHB mux in uncore
  logic             HRESP;
  logic             MTimerInt, MSwInt; // from CLINT
  logic [63:0]      MTIME_CLINT; // from CLINT to CSRs
  logic             MExtInt,SExtInt; // from PLIC

  // synchronize reset to SOC clock domain
  synchronizer resetsync(.clk, .d(reset_ext), .q(reset)); 
   
  // instantiate processor and memories
  wallypipelinedcore core(.clk, .reset,
    .MTimerInt, .MExtInt, .SExtInt, .MSwInt, 
    .MTIME_CLINT,
    .HRDATA, .HREADY, .HRESP, .HCLK, .HRESETn, .HADDR, .HWDATA, .HWSTRB,
    .HWRITE, .HSIZE, .HBURST, .HPROT, .HTRANS, .HMASTLOCK
   );

  if (`BUS) begin : uncore
    uncore uncore(.HCLK, .HRESETn, .TIMECLK,
      .HADDR, .HWDATA, .HWSTRB, .HWRITE, .HSIZE, .HBURST, .HPROT, .HTRANS, .HMASTLOCK, .HRDATAEXT,
      .HREADYEXT, .HRESPEXT, .HRDATA, .HREADY, .HRESP, .HSELEXT,
      .MTimerInt, .MSwInt, .MExtInt, .SExtInt, .GPIOPinsIn, .GPIOPinsOut, .GPIOPinsEn, .UARTSin, 
	    .UARTSout, .MTIME_CLINT, 
	    .SDCCmdOut, .SDCCmdOE, .SDCCmdIn, .SDCDatIn, .SDCCLK);
  end

endmodule