| .. |
|
debug
|
Setup to run with both the vcu108 and vcu118 boards. Set the parameters in the Makefile.
|
2022-10-24 15:38:39 -05:00 |
|
bootrom.txt
|
Added bootrom.txt.
|
2022-03-30 17:29:48 -05:00 |
|
insert_debug_comment.sh
|
Maded insert_debug_comment.sh compatible with cygwin.
|
2024-04-22 10:48:34 -05:00 |
|
Makefile
|
Merge branch 'main' of github.com:openhwgroup/cvw into spiboot
|
2024-08-06 17:09:39 -05:00 |
|
probe
|
Update python shebangs to use /usr/bin/env python3 so virtual environment can be used (also aids in general portability)
|
2024-07-03 20:42:55 -07:00 |
|
wally.tcl
|
Commented out rvvi debug probes in wally.tcl.
|
2024-08-08 13:52:53 -05:00 |
|
wave_config.wcfg
|
Updateds to vcu118 constraints and device tree.
|
2023-08-02 16:51:32 -05:00 |
|
xlnx_ahblite_axi_bridge.tcl
|
Added more support for Arty A7 board.
|
2023-04-10 16:01:17 -05:00 |
|
xlnx_axi_clock_converter.tcl
|
Added more support for Arty A7 board.
|
2023-04-10 16:01:17 -05:00 |
|
xlnx_axi_crossbar.tcl
|
The Vivado-RISC-V SDC works. Wally is now booting through it.
|
2023-05-26 15:42:33 -05:00 |
|
xlnx_axi_dwidth_conv_32to64.tcl
|
Connected the axi_sdc_controller with an axi crossbar.
|
2023-01-13 13:56:01 -06:00 |
|
xlnx_axi_dwidth_conv_64to32.tcl
|
Connected the axi_sdc_controller with an axi crossbar.
|
2023-01-13 13:56:01 -06:00 |
|
xlnx_axi_dwidth_converter.tcl
|
Connected the axi_sdc_controller with an axi crossbar.
|
2023-01-13 13:56:01 -06:00 |
|
xlnx_axi_prtcl_conv.tcl
|
Modified makefile. Added axi protocol converter IP.
|
2023-01-23 19:30:29 -06:00 |
|
xlnx_ddr3-artya7-mig.prj
|
It's almost working.
|
2023-04-18 14:24:59 -05:00 |
|
xlnx_ddr3-ArtyA7.tcl
|
Finally fixed the ddr3 mig script to work correclty.
|
2023-04-14 11:41:51 -05:00 |
|
xlnx_ddr4-vcu108.tcl
|
Setup to run with both the vcu108 and vcu118 boards. Set the parameters in the Makefile.
|
2022-10-24 15:38:39 -05:00 |
|
xlnx_ddr4-vcu118.tcl
|
Pushed vcu118 to 71MHz.
|
2023-08-25 17:04:50 -05:00 |
|
xlnx_ddr4.tcl
|
Setup to run with both the vcu108 and vcu118 boards. Set the parameters in the Makefile.
|
2022-10-24 15:38:39 -05:00 |
|
xlnx_mmcm.tcl
|
Fixed bug with mmcm not generating the 4th clock.
|
2024-05-30 16:19:28 -05:00 |
|
xlnx_proc_sys_reset.tcl
|
Added more support for Arty A7 board.
|
2023-04-10 16:01:17 -05:00 |
