forked from Github_Repos/cvw
169 lines
7.7 KiB
Plaintext
169 lines
7.7 KiB
Plaintext
# wally-pipelined.do
|
|
#
|
|
# Modification by Oklahoma State University & Harvey Mudd College
|
|
# Use with testbench_busybear
|
|
# James Stine, 2008; David Harris 2021
|
|
# Go Cowboys!!!!!!
|
|
#
|
|
# Takes 1:10 to run RV64IC tests using gui
|
|
|
|
# Use this wally-pipelined.do file to run this example.
|
|
# Either bring up ModelSim and type the following at the "ModelSim>" prompt:
|
|
# do wally-pipelined.do
|
|
# or, to run from a shell, type the following at the shell prompt:
|
|
# vsim -do wally-pipelined.do -c
|
|
# (omit the "-c" to see the GUI while running from the shell)
|
|
|
|
onbreak {resume}
|
|
|
|
# create library
|
|
if [file exists work-busybear] {
|
|
vdel -all -lib work-busybear
|
|
}
|
|
vlib work-busybear
|
|
|
|
# compile source files
|
|
# suppress spurious warnngs about
|
|
# "Extra checking for conflicts with always_comb done at vopt time"
|
|
# because vsim will run vopt
|
|
vlog +incdir+../config/busybear ../testbench/*.sv ../src/*/*.sv -suppress 2583
|
|
|
|
|
|
# start and run simulation
|
|
# remove +acc flag for faster sim during regressions if there is no need to access internal signals
|
|
vopt +acc work.testbench_busybear -o workopt
|
|
vsim workopt -suppress 8852,12070
|
|
mem load -startaddress 0 -endaddress 2047 -filltype value -fillradix hex -filldata 0 /testbench_busybear/dut/uncore/bootdtim/RAM
|
|
mem load -startaddress 512 -i "/courses/e190ax/busybear_boot/bootmem.txt" -format hex /testbench_busybear/dut/uncore/bootdtim/RAM
|
|
mem load -startaddress 0 -endaddress 2047 -filltype value -fillradix hex -filldata 0 /testbench_busybear/dut/imem/bootram
|
|
mem load -startaddress 512 -i "/courses/e190ax/busybear_boot/bootmem.txt" -format hex /testbench_busybear/dut/imem/bootram
|
|
mem load -startaddress 268435456 -endaddress 285212671 -filltype value -fillradix hex -filldata 0 /testbench_busybear/dut/uncore/dtim/RAM
|
|
mem load -startaddress 268435456 -i "/courses/e190ax/busybear_boot/ram.txt" -format hex /testbench_busybear/dut/uncore/dtim/RAM
|
|
mem load -startaddress 268435456 -endaddress 285212671 -filltype value -fillradix hex -filldata 0 /testbench_busybear/dut/imem/RAM
|
|
mem load -startaddress 268435456 -i "/courses/e190ax/busybear_boot/ram.txt" -format hex /testbench_busybear/dut/imem/RAM
|
|
|
|
view wave
|
|
|
|
-- display input and output signals as hexidecimal values
|
|
# Diplays All Signals recursively
|
|
add wave /testbench_busybear/clk
|
|
add wave /testbench_busybear/reset
|
|
add wave -divider
|
|
add wave -hex /testbench_busybear/PCtext
|
|
add wave -hex /testbench_busybear/pcExpected
|
|
add wave -hex /testbench_busybear/dut/hart/ifu/PCF
|
|
add wave -hex /testbench_busybear/dut/hart/ifu/InstrF
|
|
add wave -hex /testbench_busybear/dut/InstrF
|
|
add wave /testbench_busybear/CheckInstrF
|
|
add wave /testbench_busybear/lastCheckInstrF
|
|
add wave /testbench_busybear/speculative
|
|
add wave /testbench_busybear/lastPC2
|
|
add wave -divider
|
|
add wave -divider
|
|
add wave /testbench_busybear/dut/uncore/HSELBootTim
|
|
add wave /testbench_busybear/dut/uncore/HSELTim
|
|
add wave /testbench_busybear/dut/uncore/HREADTim
|
|
add wave /testbench_busybear/dut/uncore/dtim/HREADTim0
|
|
add wave /testbench_busybear/dut/uncore/HREADYTim
|
|
add wave -divider
|
|
add wave /testbench_busybear/dut/uncore/HREADBootTim
|
|
add wave /testbench_busybear/dut/uncore/bootdtim/HREADTim0
|
|
add wave /testbench_busybear/dut/uncore/HREADYBootTim
|
|
add wave /testbench_busybear/dut/uncore/HADDR
|
|
add wave /testbench_busybear/dut/uncore/HRESP
|
|
add wave /testbench_busybear/dut/uncore/HREADY
|
|
add wave /testbench_busybear/dut/uncore/HRDATA
|
|
#add wave -hex /testbench_busybear/dut/hart/priv/csr/MTVEC_REG
|
|
#add wave -hex /testbench_busybear/dut/hart/priv/csr/MSTATUS_REG
|
|
#add wave -hex /testbench_busybear/dut/hart/priv/csr/SCOUNTEREN_REG
|
|
#add wave -hex /testbench_busybear/dut/hart/priv/csr/MIE_REG
|
|
#add wave -hex /testbench_busybear/dut/hart/priv/csr/MIDELEG_REG
|
|
#add wave -hex /testbench_busybear/dut/hart/priv/csr/MEDELEG_REG
|
|
add wave -divider
|
|
# registers!
|
|
add wave -hex /testbench_busybear/regExpected
|
|
add wave -hex /testbench_busybear/regNumExpected
|
|
add wave -hex /testbench_busybear/HWRITE
|
|
add wave -hex /testbench_busybear/dut/hart/MemRWM[1]
|
|
add wave -hex /testbench_busybear/HWDATA
|
|
add wave -hex /testbench_busybear/HRDATA
|
|
add wave -hex /testbench_busybear/HADDR
|
|
add wave -hex /testbench_busybear/readAdrExpected
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[1]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[2]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[3]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[4]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[5]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[6]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[7]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[8]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[9]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[10]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[11]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[12]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[13]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[14]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[15]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[16]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[17]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[18]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[19]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[20]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[21]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[22]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[23]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[24]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[25]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[26]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[27]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[28]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[29]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[30]
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/regf/rf[31]
|
|
add wave /testbench_busybear/InstrFName
|
|
add wave -hex /testbench_busybear/dut/hart/ifu/PCD
|
|
#add wave -hex /testbench_busybear/dut/hart/ifu/InstrD
|
|
add wave /testbench_busybear/InstrDName
|
|
#add wave -divider
|
|
add wave -hex /testbench_busybear/dut/hart/ifu/PCE
|
|
##add wave -hex /testbench_busybear/dut/hart/ifu/InstrE
|
|
add wave /testbench_busybear/InstrEName
|
|
#add wave -hex /testbench_busybear/dut/hart/ieu/dp/SrcAE
|
|
#add wave -hex /testbench_busybear/dut/hart/ieu/dp/SrcBE
|
|
add wave -hex /testbench_busybear/dut/hart/ieu/dp/ALUResultE
|
|
#add wave /testbench_busybear/dut/hart/ieu/dp/PCSrcE
|
|
#add wave -divider
|
|
add wave -hex /testbench_busybear/dut/hart/ifu/PCM
|
|
##add wave -hex /testbench_busybear/dut/hart/ifu/InstrM
|
|
add wave /testbench_busybear/InstrMName
|
|
#add wave /testbench_busybear/dut/hart/dmem/dtim/memwrite
|
|
#add wave -hex /testbench_busybear/dut/hart/dmem/AdrM
|
|
#add wave -hex /testbench_busybear/dut/hart/dmem/WriteDataM
|
|
#add wave -divider
|
|
add wave -hex /testbench_busybear/dut/hart/ifu/PCW
|
|
##add wave -hex /testbench_busybear/dut/hart/ifu/InstrW
|
|
add wave /testbench_busybear/InstrWName
|
|
#add wave /testbench_busybear/dut/hart/ieu/dp/RegWriteW
|
|
#add wave -hex /testbench_busybear/dut/hart/ieu/dp/ResultW
|
|
#add wave -hex /testbench_busybear/dut/hart/ieu/dp/RdW
|
|
#add wave -divider
|
|
##add ww
|
|
add wave -hex -r /testbench_busybear/*
|
|
#
|
|
#-- Set Wave Output Items
|
|
#TreeUpdate [SetDefaultTree]
|
|
#WaveRestoreZoom {0 ps} {100 ps}
|
|
#configure wave -namecolwidth 250
|
|
#configure wave -valuecolwidth 120
|
|
#configure wave -justifyvalue left
|
|
#configure wave -signalnamewidth 0
|
|
#configure wave -snapdistance 10
|
|
#configure wave -datasetprefix 0
|
|
#configure wave -rowmargin 4
|
|
#configure wave -childrowmargin 2
|
|
#set DefaultRadix hexadecimal
|
|
#
|
|
#-- Run the Simulation
|
|
run -all
|
|
##quit
|