cvw/wally-pipelined/src/privileged/privileged.sv
Ross Thompson 3345ed7ff4 Merged several of the load/store/instruction access faults inside the mmu.
Still need to figure out what is wrong with the generation of load page fault when dtlb hit.
2021-07-06 13:43:53 -05:00

186 lines
8.4 KiB
Systemverilog

///////////////////////////////////////////
// privileged.sv
//
// Written: David_Harris@hmc.edu 5 January 2021
// Modified:
//
// Purpose: Implements the CSRs, Exceptions, and Privileged operations
// See RISC-V Privileged Mode Specification 20190608
//
// A component of the Wally configurable RISC-V project.
//
// Copyright (C) 2021 Harvey Mudd College & Oklahoma State University
//
// Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation
// files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy,
// modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software
// is furnished to do so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
// OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
// BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
// OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
///////////////////////////////////////////
`include "wally-config.vh"
// *** remove signals not needed by PMA/PMP now that it is moved
module privileged (
input logic clk, reset,
input logic FlushD, FlushE, FlushM, FlushW, StallD, StallE, StallM, StallW,
input logic CSRReadM, CSRWriteM,
input logic [`XLEN-1:0] SrcAM,
input logic [`XLEN-1:0] PCF,PCD,PCE,PCM,
input logic [31:0] InstrD, InstrE, InstrM, InstrW,
output logic [`XLEN-1:0] CSRReadValW,
output logic [`XLEN-1:0] PrivilegedNextPCM,
output logic RetM, TrapM, NonBusTrapM,
output logic ITLBFlushF, DTLBFlushM,
input logic InstrValidM,InstrValidW, CommittedM,
input logic FloatRegWriteW, LoadStallD,
input logic BPPredDirWrongM,
input logic BTBPredPCWrongM,
input logic RASPredPCWrongM,
input logic BPPredClassNonCFIWrongM,
input logic [4:0] InstrClassM,
input logic PrivilegedM,
input logic ITLBInstrPageFaultF, DTLBLoadPageFaultM, DTLBStorePageFaultM,
input logic WalkerInstrPageFaultF, WalkerLoadPageFaultM, WalkerStorePageFaultM,
input logic InstrMisalignedFaultM, IllegalIEUInstrFaultD, IllegalFPUInstrD,
input logic LoadMisalignedFaultM,
input logic StoreMisalignedFaultM,
input logic TimerIntM, ExtIntM, SwIntM,
input logic [63:0] MTIME_CLINT, MTIMECMP_CLINT,
input logic [`XLEN-1:0] InstrMisalignedAdrM, MemAdrM,
input logic [4:0] SetFflagsM,
// Trap signals from pmp/pma in mmu
// *** do these need to be split up into one for dmem and one for ifu?
// instead, could we only care about the instr and F pins that come from ifu and only care about the load/store and m pins that come from dmem?
input logic InstrAccessFaultF,
input logic LoadAccessFaultM,
input logic StoreAccessFaultM,
output logic IllegalFPUInstrE,
output logic [1:0] PrivilegeModeW,
output logic [`XLEN-1:0] SATP_REGW,
output logic STATUS_MXR, STATUS_SUM, STATUS_MPRV,
output logic [1:0] STATUS_MPP,
output var logic [7:0] PMPCFG_ARRAY_REGW[`PMP_ENTRIES-1:0],
output var logic [`XLEN-1:0] PMPADDR_ARRAY_REGW [`PMP_ENTRIES-1:0],
output logic [2:0] FRM_REGW
);
logic [1:0] NextPrivilegeModeM;
logic [`XLEN-1:0] CauseM, NextFaultMtvalM;
logic [`XLEN-1:0] MEPC_REGW, SEPC_REGW, UEPC_REGW, UTVEC_REGW, STVEC_REGW, MTVEC_REGW;
// logic [11:0] MEDELEG_REGW, MIDELEG_REGW, SEDELEG_REGW, SIDELEG_REGW;
logic [`XLEN-1:0] MEDELEG_REGW, MIDELEG_REGW, SEDELEG_REGW, SIDELEG_REGW;
logic uretM, sretM, mretM, ecallM, ebreakM, wfiM, sfencevmaM;
logic IllegalCSRAccessM;
logic IllegalIEUInstrFaultE, IllegalIEUInstrFaultM;
logic IllegalFPUInstrM;
logic LoadPageFaultM, StorePageFaultM;
logic InstrPageFaultF, InstrPageFaultD, InstrPageFaultE, InstrPageFaultM;
logic InstrAccessFaultD, InstrAccessFaultE, InstrAccessFaultM;
logic IllegalInstrFaultM, TrappedSRETM;
logic BreakpointFaultM, EcallFaultM;
logic MTrapM, STrapM, UTrapM;
logic InterruptM;
logic STATUS_SPP, STATUS_TSR, STATUS_TW;
logic STATUS_MIE, STATUS_SIE;
logic [11:0] MIP_REGW, MIE_REGW, SIP_REGW, SIE_REGW;
logic md, sd;
///////////////////////////////////////////
// track the current privilege level
///////////////////////////////////////////
// get bits of DELEG registers based on CAUSE
// assign md = CauseM[`XLEN-1] ? MIDELEG_REGW[CauseM[3:0]] : MEDELEG_REGW[CauseM[3:0]];
// assign sd = CauseM[`XLEN-1] ? SIDELEG_REGW[CauseM[3:0]] : SEDELEG_REGW[CauseM[3:0]]; // depricated
assign md = CauseM[`XLEN-1] ? MIDELEG_REGW[CauseM[`LOG_XLEN-1:0]] : MEDELEG_REGW[CauseM[`LOG_XLEN-1:0]];
assign sd = CauseM[`XLEN-1] ? SIDELEG_REGW[CauseM[`LOG_XLEN-1:0]] : SEDELEG_REGW[CauseM[`LOG_XLEN-1:0]]; // depricated
// PrivilegeMode FSM
always_comb begin
TrappedSRETM = 0;
if (mretM) NextPrivilegeModeM = STATUS_MPP;
else if (sretM)
if (STATUS_TSR & PrivilegeModeW == `S_MODE) begin
TrappedSRETM = 1;
NextPrivilegeModeM = PrivilegeModeW;
end else NextPrivilegeModeM = {1'b0, STATUS_SPP};
else if (uretM) NextPrivilegeModeM = `U_MODE;
else if (TrapM) begin // Change privilege based on DELEG registers (see 3.1.8)
if (PrivilegeModeW == `U_MODE)
if (`N_SUPPORTED & `U_SUPPORTED & md & sd) NextPrivilegeModeM = `U_MODE;
else if (`S_SUPPORTED & md) NextPrivilegeModeM = `S_MODE;
else NextPrivilegeModeM = `M_MODE;
else if (PrivilegeModeW == `S_MODE)
if (`S_SUPPORTED & md) NextPrivilegeModeM = `S_MODE;
else NextPrivilegeModeM = `M_MODE;
else NextPrivilegeModeM = `M_MODE;
end else NextPrivilegeModeM = PrivilegeModeW;
end
// *** WFI could be implemented here and depends on TW
flopenl #(2) privmodereg(clk, reset, ~StallW, NextPrivilegeModeM, `M_MODE, PrivilegeModeW);
///////////////////////////////////////////
// decode privileged instructions
///////////////////////////////////////////
privdec pmd(.InstrM(InstrM[31:20]), .*);
///////////////////////////////////////////
// Control and Status Registers
///////////////////////////////////////////
csr csr(.*);
///////////////////////////////////////////
// Extract exceptions by name and handle them
///////////////////////////////////////////
assign BreakpointFaultM = ebreakM; // could have other causes too
assign EcallFaultM = ecallM;
assign ITLBFlushF = sfencevmaM;
assign DTLBFlushM = sfencevmaM;
// A page fault might occur because of insufficient privilege during a TLB
// lookup or a improperly formatted page table during walking
// *** merge these at the lsu level.
assign InstrPageFaultF = ITLBInstrPageFaultF || WalkerInstrPageFaultF;
assign LoadPageFaultM = DTLBLoadPageFaultM || WalkerLoadPageFaultM;
assign StorePageFaultM = DTLBStorePageFaultM || WalkerStorePageFaultM;
// pipeline fault signals
flopenrc #(2) faultregD(clk, reset, FlushD, ~StallD,
{InstrPageFaultF, InstrAccessFaultF},
{InstrPageFaultD, InstrAccessFaultD});
flopenrc #(4) faultregE(clk, reset, FlushE, ~StallE,
{IllegalIEUInstrFaultD, InstrPageFaultD, InstrAccessFaultD, IllegalFPUInstrD}, // ** vs IllegalInstrFaultInD
{IllegalIEUInstrFaultE, InstrPageFaultE, InstrAccessFaultE, IllegalFPUInstrE});
flopenrc #(4) faultregM(clk, reset, FlushM, ~StallM,
{IllegalIEUInstrFaultE, InstrPageFaultE, InstrAccessFaultE, IllegalFPUInstrE},
{IllegalIEUInstrFaultM, InstrPageFaultM, InstrAccessFaultM, IllegalFPUInstrM});
// *** it should be possible to compbine some of these faults earlier to reduce module boundary crossings and save flops dh 5 july 2021
trap trap(.*);
endmodule