forked from Github_Repos/cvw
154 lines
4.3 KiB
Systemverilog
154 lines
4.3 KiB
Systemverilog
//////////////////////////////////////////
|
|
// wally-config.vh
|
|
//
|
|
// Written: David_Harris@hmc.edu 4 January 2021
|
|
// Modified:
|
|
//
|
|
// Purpose: Specify which features are configured
|
|
// Macros to determine which modes are supported based on MISA
|
|
//
|
|
// A component of the Wally configurable RISC-V project.
|
|
//
|
|
// Copyright (C) 2021 Harvey Mudd College & Oklahoma State University
|
|
//
|
|
// SPDX-License-Identifier: Apache-2.0 WITH SHL-2.1
|
|
//
|
|
// Licensed under the Solderpad Hardware License v 2.1 (the “License”); you may not use this file
|
|
// except in compliance with the License, or, at your option, the Apache License version 2.0. You
|
|
// may obtain a copy of the License at
|
|
//
|
|
// https://solderpad.org/licenses/SHL-2.1/
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, any work distributed under the
|
|
// License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
|
|
// either express or implied. See the License for the specific language governing permissions
|
|
// and limitations under the License.
|
|
////////////////////////////////////////////////////////////////////////////////////////////////
|
|
|
|
// include shared configuration
|
|
`include "wally-shared.vh"
|
|
|
|
`define FPGA 0
|
|
`define QEMU 0
|
|
|
|
// RV32 or RV64: XLEN = 32 or 64
|
|
`define XLEN 32
|
|
|
|
// IEEE 754 compliance
|
|
`define IEEE754 0
|
|
|
|
`define MISA (32'h00000104 | 1 << 20 | 1 << 18 | 1 << 12)
|
|
`define ZICSR_SUPPORTED 1
|
|
`define ZIFENCEI_SUPPORTED 1
|
|
`define COUNTERS 32
|
|
`define ZICOUNTERS_SUPPORTED 1
|
|
`define ZFH_SUPPORTED 0
|
|
`define SSTC_SUPPORTED 0
|
|
|
|
// LSU microarchitectural Features
|
|
`define BUS_SUPPORTED 1
|
|
`define DCACHE_SUPPORTED 0
|
|
`define ICACHE_SUPPORTED 0
|
|
`define VIRTMEM_SUPPORTED 0
|
|
`define VECTORED_INTERRUPTS_SUPPORTED 1
|
|
`define BIGENDIAN_SUPPORTED 0
|
|
|
|
// TLB configuration. Entries should be a power of 2
|
|
`define ITLB_ENTRIES 0
|
|
`define DTLB_ENTRIES 0
|
|
|
|
// Cache configuration. Sizes should be a power of two
|
|
// typical configuration 4 ways, 4096 bytes per way, 256 bit or more lines
|
|
`define DCACHE_NUMWAYS 4
|
|
`define DCACHE_WAYSIZEINBYTES 4096
|
|
`define DCACHE_LINELENINBITS 512
|
|
`define ICACHE_NUMWAYS 4
|
|
`define ICACHE_WAYSIZEINBYTES 4096
|
|
`define ICACHE_LINELENINBITS 512
|
|
|
|
// Integer Divider Configuration
|
|
// IDIV_BITSPERCYCLE must be 1, 2, or 4
|
|
`define IDIV_BITSPERCYCLE 2
|
|
`define IDIV_ON_FPU 0
|
|
|
|
// Legal number of PMP entries are 0, 16, or 64
|
|
`define PMP_ENTRIES 0
|
|
|
|
// Address space
|
|
`define RESET_VECTOR 32'h80000000
|
|
|
|
// WFI Timeout Wait
|
|
`define WFI_TIMEOUT_BIT 16
|
|
|
|
// Peripheral Addresses
|
|
// Peripheral memory space extends from BASE to BASE+RANGE
|
|
// Range should be a thermometer code with 0's in the upper bits and 1s in the lower bits
|
|
`define DTIM_SUPPORTED 1'b1
|
|
`define DTIM_BASE 34'h80000000
|
|
`define DTIM_RANGE 34'h007FFFFF
|
|
`define IROM_SUPPORTED 1'b1
|
|
`define IROM_BASE 34'h80000000
|
|
`define IROM_RANGE 34'h007FFFFF
|
|
`define BOOTROM_SUPPORTED 1'b0
|
|
`define BOOTROM_BASE 34'h00001000
|
|
`define BOOTROM_RANGE 34'h00000FFF
|
|
`define UNCORE_RAM_SUPPORTED 1'b0
|
|
`define UNCORE_RAM_BASE 34'h80000000
|
|
`define UNCORE_RAM_RANGE 34'h07FFFFFF
|
|
`define EXT_MEM_SUPPORTED 1'b0
|
|
`define EXT_MEM_BASE 34'h80000000
|
|
`define EXT_MEM_RANGE 34'h07FFFFFF
|
|
`define CLINT_SUPPORTED 1'b1
|
|
`define CLINT_BASE 34'h02000000
|
|
`define CLINT_RANGE 34'h0000FFFF
|
|
`define GPIO_SUPPORTED 1'b1
|
|
`define GPIO_BASE 34'h10060000
|
|
`define GPIO_RANGE 34'h000000FF
|
|
`define UART_SUPPORTED 1'b1
|
|
`define UART_BASE 34'h10000000
|
|
`define UART_RANGE 34'h00000007
|
|
`define PLIC_SUPPORTED 1'b1
|
|
`define PLIC_BASE 34'h0C000000
|
|
`define PLIC_RANGE 34'h03FFFFFF
|
|
`define SDC_SUPPORTED 1'b0
|
|
`define SDC_BASE 34'h00012100
|
|
`define SDC_RANGE 34'h0000001F
|
|
|
|
// Bus Interface width
|
|
`define AHBW 32
|
|
|
|
// Test modes
|
|
|
|
// Tie GPIO outputs back to inputs
|
|
`define GPIO_LOOPBACK_TEST 1
|
|
|
|
// Hardware configuration
|
|
`define UART_PRESCALE 1
|
|
|
|
// Interrupt configuration
|
|
`define PLIC_NUM_SRC 10
|
|
// comment out the following if >=32 sources
|
|
`define PLIC_NUM_SRC_LT_32
|
|
`define PLIC_GPIO_ID 3
|
|
`define PLIC_UART_ID 10
|
|
|
|
`define BPRED_SUPPORTED 0
|
|
`define BPRED_TYPE "BPSPECULATIVEGSHARE" // BPLOCALPAg or BPGLOBAL or BPTWOBIT or BPGSHARE
|
|
`define BPRED_SIZE 10
|
|
`define BTB_SIZE (`BPRED_SIZE)
|
|
|
|
`define HPTW_WRITES_SUPPORTED 0
|
|
|
|
// FPU division architecture
|
|
`define RADIX 32'h4
|
|
`define DIVCOPIES 32'h4
|
|
|
|
// bit manipulation
|
|
`define ZBA_SUPPORTED 0
|
|
`define ZBB_SUPPORTED 0
|
|
`define ZBC_SUPPORTED 0
|
|
`define ZBS_SUPPORTED 0
|
|
|
|
// Memory synthesis configuration
|
|
`define USE_SRAM 0
|