Merge branch 'main' of github.com:davidharrishmc/riscv-wally into main

pipelined/regression/regression-wally

@@ -91,7 +91,7 @@ for test in tests32ic:
         grepstr="All tests ran without failures")
   configs.append(tc)
 
-tests32i = ["wally32periph"] 
+tests32i = ["arch32i", "wally32periph"] 
 for test in tests32i:
   tc = TestCase(
         name=test,

pipelined/src/fpu/fdivsqrt/fdivsqrtiter.sv

@@ -92,7 +92,7 @@ module fdivsqrtiter(
   logic [1:0] initCSqrt, initCDiv2, initCDiv4, initCUpper;
   assign initCSqrt = 2'b11;
   assign initCDiv2 = 2'b10;
-  assign initCDiv4 = 2'b10; // *** not sure why this works; seems like it should be 00 for initializing to -4
+  assign initCDiv4 = 2'b00; // *** not sure why this works; seems like it should be 00 for initializing to -4
   assign initCUpper = SqrtE ? initCSqrt : (`RADIX == 4) ? initCDiv4 : initCDiv2;
   assign initC = {initCUpper, {`DIVb{1'b0}}};
 

pipelined/src/fpu/postproc/divshiftcalc.sv

@@ -42,11 +42,8 @@ module divshiftcalc(
 );
     logic [`LOGNORMSHIFTSZ-1:0] NormShift, DivDenormShiftAmt;
     logic [`NE+1:0] DivDenormShift;
-    logic [`NORMSHIFTSZ-1:0] PreDivShiftIn;
-
-    logic [`DURLEN-1:0] DivEarlyTermShift = 0;
-
-    // is the result denromalized
+ 
+    // is the result denormalized
     // if the exponent is 1 then the result needs to be normalized then the result is denormalizes
     assign DivResDenorm = DivQe[`NE+1]|(~|DivQe[`NE+1:0]);
 
@@ -74,8 +71,5 @@ module divshiftcalc(
     assign DivDenormShiftAmt = DivDenormShiftPos ? DivDenormShift[`LOGNORMSHIFTSZ-1:0] : '0;
     assign DivShiftAmt = DivResDenorm ? DivDenormShiftAmt : NormShift;
 
-    // *** explain why radix 4 division needs a left shift by 1
-    // *** can this shift be moved into the shiftcorrection logic?
-    assign PreDivShiftIn = {{`NF{1'b0}}, DivQm, {`NORMSHIFTSZ-`DIVb+1-`NF{1'b0}}};
-    assign DivShiftIn = PreDivShiftIn << (`RADIX==4 & ~Sqrt); // {{`NF{1'b0}}, DivQm[`DIVb-1:0], {`NORMSHIFTSZ-`DIVb+2-`NF{1'b0}}};
+    assign DivShiftIn = {{`NF{1'b0}}, DivQm, {`NORMSHIFTSZ-`DIVb+1-`NF{1'b0}}};
 endmodule

pipelined/src/ieu/controller.sv

@@ -236,5 +236,7 @@ module controller(
   // Stall pipeline at Fetch if a CSR Write or Fence is pending in the subsequent stages
   assign CSRWriteFencePendingDEM = CSRWriteD | CSRWriteE | CSRWriteM | FencePendingD | FencePendingE | FencePendingM;
 
-  assign StoreStallD = MemRWE[0] & ((|MemRWD) | (|AtomicD));
+  // the synchronous DTIM cannot read immediately after write
+  // a cache cannot read or write immediately after a write
+  assign StoreStallD = MemRWE[0] & ((MemRWD[1] | (MemRWD[0] & `DCACHE)) | (|AtomicD));
 endmodule

pipelined/testbench/testbench-fp.sv

@@ -104,6 +104,7 @@ module testbenchfp;
   logic       DivDone;
   logic       DivNegSticky;
   logic [`NE+1:0] DivCalcExp;
+  logic divsqrtop;
 
 
   ///////////////////////////////////////////////////////////////////////////////////////////////
@@ -878,12 +879,16 @@ always @(negedge clk) begin
     // check if result is correct
     //  - wait till the division result is done or one extra cylcle for early termination (to simulate the EM pipline stage)
    // if(~((Res === Ans | NaNGood | NaNGood === 1'bx) & (ResFlg === AnsFlg | AnsFlg === 5'bx))&~((DivBusy===1'b1)|DivStart)&(UnitVal !== `CVTINTUNIT)&(UnitVal !== `CMPUNIT)) begin
-    assign ResMatch = (Res === Ans | NaNGood | NaNGood === 1'bx);
-    assign FlagMatch = (ResFlg === AnsFlg | AnsFlg === 5'bx);
-    assign CheckNow = (DivDone | (TEST != "sqrt" & TEST != "div"))&(UnitVal !== `CVTINTUNIT)&(UnitVal !== `CMPUNIT);
+    ResMatch = (Res === Ans | NaNGood | NaNGood === 1'bx);
+    FlagMatch = (ResFlg === AnsFlg | AnsFlg === 5'bx);
+    divsqrtop = OpCtrlVal == `SQRT_OPCTRL | OpCtrlVal == `DIV_OPCTRL;
+
+    //assign divsqrtop = OpCtrl[TestNum] == `SQRT_OPCTRL | OpCtrl[TestNum] == `DIV_OPCTRL;
+    CheckNow = (DivDone | ~divsqrtop) & (UnitVal !== `CVTINTUNIT)&(UnitVal !== `CMPUNIT);
     if(~(ResMatch & FlagMatch) & CheckNow) begin
 //    if(~((Res === Ans | NaNGood | NaNGood === 1'bx) & (ResFlg === AnsFlg | AnsFlg === 5'bx))&(DivDone | (TEST != "sqrt" & TEST != "div"))&(UnitVal !== `CVTINTUNIT)&(UnitVal !== `CMPUNIT)) begin
       errors += 1;
+      $display("TestNum %d OpCtrl %d", TestNum, OpCtrl[TestNum]);
       $display("Error in %s", Tests[TestNum]);
       $display("inputs: %h %h %h\nSrcA: %h\n Res: %h %h\n Expected: %h %h", X, Y, Z, SrcA, Res, ResFlg, Ans, AnsFlg);
       $stop;