cvw/pipelined/src/cache/cache.sv

///////////////////////////////////////////
// cache (data cache)
//
// Written: ross1728@gmail.com July 07, 2021
//          Implements the L1 data cache
//
// Purpose: Storage for data and meta data.
//
// A component of the Wally configurable RISC-V project.
//
// Copyright (C) 2021 Harvey Mudd College & Oklahoma State University
//
// MIT LICENSE
// Permission is hereby granted, free of charge, to any person obtaining a copy of this 
// software and associated documentation files (the "Software"), to deal in the Software 
// without restriction, including without limitation the rights to use, copy, modify, merge, 
// publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons 
// to whom the Software is furnished to do so, subject to the following conditions:
//
//   The above copyright notice and this permission notice shall be included in all copies or 
//   substantial portions of the Software.
//
//   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, 
//   INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR 
//   PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS 
//   BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, 
//   TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE 
//   OR OTHER DEALINGS IN THE SOFTWARE.
////////////////////////////////////////////////////////////////////////////////////////////////


`include "wally-config.vh"

module cache #(parameter integer LINELEN, 
			   parameter integer NUMLINES, 
			   parameter integer NUMWAYS,
			   parameter integer DCACHE = 1)
  (input logic clk,
   input logic				   reset,
   // cpu side
   input logic				   CPUBusy,
   input logic [1:0]		   RW,
   input logic [1:0]		   Atomic,
   input logic				   FlushCache,
   input logic				   InvalidateCacheM,
   input logic [11:0]		   NextAdr, // virtual address, but we only use the lower 12 bits.
   input logic [`PA_BITS-1:0]  PAdr, // physical address
   input logic [`XLEN-1:0]	   FinalWriteData,
   output logic [`XLEN-1:0]	   ReadDataWord,
   output logic				   CacheCommitted,
   output logic				   CacheStall,

   // to performance counters to cpu
   output logic				   CacheMiss,
   output logic				   CacheAccess,

   // lsu control
   input logic				   IgnoreRequest,

   // Bus fsm interface
   output logic				   CacheFetchLine,
   output logic				   CacheWriteLine,
   input logic				   CacheBusAck,

   output logic [`PA_BITS-1:0] CacheBusAdr,
   input logic [LINELEN-1:0]   CacheMemWriteData,
   output logic [`XLEN-1:0]	   ReadDataLineSets [(LINELEN/`XLEN)-1:0]);


  localparam integer 						LINEBYTELEN = LINELEN/8;
  localparam integer 						OFFSETLEN = $clog2(LINEBYTELEN);
  localparam integer 						INDEXLEN = $clog2(NUMLINES);
  localparam integer 						TAGLEN = `PA_BITS - OFFSETLEN - INDEXLEN;
  localparam integer 						WORDSPERLINE = LINELEN/`XLEN;
  localparam integer 						LOGWPL = $clog2(WORDSPERLINE);
  localparam integer 						LOGXLENBYTES = $clog2(`XLEN/8);

  localparam integer 						FlushAdrThreshold   = NUMLINES - 1;

  logic [1:0] 								SelAdr;
  logic [INDEXLEN-1:0] 						RAdr;
  logic [LINELEN-1:0] 						SRAMWriteData;
  logic 									SetValid, ClearValid;
  logic 									SetDirty, ClearDirty;
  logic [LINELEN-1:0] 						ReadDataLineWayMasked [NUMWAYS-1:0];
  logic [NUMWAYS-1:0] 						WayHit;
  logic 									CacheHit;
  logic [LINELEN-1:0] 						ReadDataLine;
  logic [WORDSPERLINE-1:0] 					SRAMWordEnable;

  logic 									SRAMWordWriteEnable;
  logic 									SRAMLineWriteEnable;
  logic [NUMWAYS-1:0] 						SRAMLineWayWriteEnable;
  logic [NUMWAYS-1:0] 						SRAMWayWriteEnable;
  

  logic [NUMWAYS-1:0] 						VictimWay;
  logic [NUMWAYS-1:0] 						VictimDirtyWay;
  logic 									VictimDirty;

  logic [2**LOGWPL-1:0] 					MemPAdrDecoded;

  logic [TAGLEN-1:0] 						VictimTagWay [NUMWAYS-1:0];
  logic [TAGLEN-1:0] 						VictimTag;

  logic [INDEXLEN-1:0] 						FlushAdr;
  logic [INDEXLEN-1:0] 						FlushAdrP1;
  logic 									FlushAdrCntEn;
  logic 									FlushAdrCntRst;
  logic 									FlushAdrFlag;
    logic 									FlushWayFlag;
  
  logic [NUMWAYS-1:0] 						FlushWay;
  logic [NUMWAYS-1:0] 						NextFlushWay;
  logic 									FlushWayCntEn;
  logic 									FlushWayCntRst;  

  logic 									VDWriteEnable;
  logic 									SelEvict;
  logic 									LRUWriteEn;
  logic [NUMWAYS-1:0] 						VDWriteEnableWay;
  logic 									SelFlush;

  // Read Path CPU (IEU) side

  mux3 #(INDEXLEN)
  AdrSelMux(.d0(NextAdr[INDEXLEN+OFFSETLEN-1:OFFSETLEN]),
			.d1(PAdr[INDEXLEN+OFFSETLEN-1:OFFSETLEN]),
			.d2(FlushAdr),
			.s(SelAdr),
			.y(RAdr));

   

  cacheway #(.NUMLINES(NUMLINES), .LINELEN(LINELEN), .TAGLEN(TAGLEN), 
			 .OFFSETLEN(OFFSETLEN), .INDEXLEN(INDEXLEN))
  MemWay[NUMWAYS-1:0](.clk, .reset, .RAdr,
					  .PAdr(PAdr),
					  .WriteEnable(SRAMWayWriteEnable),
					  .VDWriteEnable(VDWriteEnableWay),
					  .WriteWordEnable(SRAMWordEnable),
					  .TagWriteEnable(SRAMLineWayWriteEnable), 
					  .WriteData(SRAMWriteData),
					  .SetValid, .ClearValid, .SetDirty, .ClearDirty, .SelEvict,
					  .VictimWay, .FlushWay, .SelFlush,
					  .ReadDataLineWayMasked,
					  .WayHit, .VictimDirtyWay, .VictimTagWay,
					  .InvalidateAll(InvalidateCacheM));

  if(NUMWAYS > 1) begin:vict
    cachereplacementpolicy #(NUMWAYS, INDEXLEN, OFFSETLEN, NUMLINES)
    cachereplacementpolicy(.clk, .reset,
              .WayHit,
              .VictimWay,
              .PAdr(PAdr[INDEXLEN+OFFSETLEN-1:OFFSETLEN]),
              .RAdr,
              .LRUWriteEn);
  end else begin:vict
    assign VictimWay = 1'b1; // one hot.
  end

  assign CacheHit = | WayHit;
  assign VictimDirty = | VictimDirtyWay;

  
  // ReadDataLineWayMaskedM is a 2d array of cache line len by number of ways.
  // Need to OR together each way in a bitwise manner.
  // Final part of the AO Mux.  First is the AND in the cacheway.
  or_rows #(NUMWAYS, LINELEN) ReadDataAOMux(.a(ReadDataLineWayMasked), .y(ReadDataLine));
  or_rows #(NUMWAYS, TAGLEN) VictimTagAOMux(.a(VictimTagWay), .y(VictimTag));  


  // Convert the Read data bus ReadDataSelectWay into sets of XLEN so we can
  // easily build a variable input mux.
  genvar index;
	if(DCACHE == 1) begin: readdata
    for (index = 0; index < WORDSPERLINE; index++) begin:readdatalinesetsmux
		  assign ReadDataLineSets[index] = ReadDataLine[((index+1)*`XLEN)-1: (index*`XLEN)];
    end
	  // variable input mux
	  assign ReadDataWord = ReadDataLineSets[PAdr[LOGWPL + LOGXLENBYTES - 1 : LOGXLENBYTES]];
	end else begin: readdata
	  logic [31:0] 				  ReadLineSetsF [LINELEN/16-1:0];
	  logic [31:0] 				  FinalInstrRawF;
	  for(index = 0; index < LINELEN / 16 - 1; index++) 
		  assign ReadLineSetsF[index] = ReadDataLine[((index+1)*16)+16-1 : (index*16)];
	  assign ReadLineSetsF[LINELEN/16-1] = {16'b0, ReadDataLine[LINELEN-1:LINELEN-16]};
	  assign FinalInstrRawF = ReadLineSetsF[PAdr[$clog2(LINELEN / 32) + 1 : 1]];
	  if (`XLEN == 64) assign ReadDataWord = {32'b0, FinalInstrRawF};		
	  else             assign ReadDataWord = FinalInstrRawF;				
	end

  // Write Path CPU (IEU) side

  onehotdecoder #(LOGWPL)
  adrdec(.bin(PAdr[LOGWPL+LOGXLENBYTES-1:LOGXLENBYTES]),
		 .decoded(MemPAdrDecoded));

  assign SRAMWordEnable = SRAMLineWriteEnable ? '1 : MemPAdrDecoded;
  
  assign SRAMLineWayWriteEnable = SRAMLineWriteEnable ? VictimWay : '0;
  
  mux2 #(NUMWAYS) WriteEnableMux(.d0(SRAMWordWriteEnable ? WayHit : '0),
								 .d1(VictimWay),
								 .s(SRAMLineWriteEnable),
								 .y(SRAMWayWriteEnable));



  mux2 #(LINELEN) WriteDataMux(.d0({WORDSPERLINE{FinalWriteData}}),
								.d1(CacheMemWriteData),
								.s(SRAMLineWriteEnable),
								.y(SRAMWriteData));

  
  mux3 #(`PA_BITS) BaseAdrMux(.d0({PAdr[`PA_BITS-1:OFFSETLEN], {{OFFSETLEN}{1'b0}}}),
							  .d1({VictimTag, PAdr[INDEXLEN+OFFSETLEN-1:OFFSETLEN], {{OFFSETLEN}{1'b0}}}),
							  .d2({VictimTag, FlushAdr, {{OFFSETLEN}{1'b0}}}),
							  .s({SelFlush, SelEvict}),
							  .y(CacheBusAdr));


  // flush address and way generation.
  // increment on 2nd to last way
  flopenr #(INDEXLEN)
  FlushAdrReg(.clk,
			  .reset(reset | FlushAdrCntRst),
			  .en(FlushAdrCntEn),
			  .d(FlushAdrP1),
			  .q(FlushAdr));
  assign FlushAdrP1 = FlushAdr + 1'b1;


  flopenl #(NUMWAYS)
  FlushWayReg(.clk,
			  .load(reset | FlushWayCntRst),
			  .en(FlushWayCntEn),
			  .val({{NUMWAYS-1{1'b0}}, 1'b1}),
			  .d(NextFlushWay),
			  .q(FlushWay));

  assign VDWriteEnableWay = FlushWay & {NUMWAYS{VDWriteEnable}};

  assign NextFlushWay = {FlushWay[NUMWAYS-2:0], FlushWay[NUMWAYS-1]};

  //assign FlushAdrFlag = FlushAdr == FlushAdrThreshold[INDEXLEN-1:0] & FlushWay[NUMWAYS-1];
  assign FlushAdrFlag = FlushAdr == FlushAdrThreshold[INDEXLEN-1:0];
  assign FlushWayFlag = FlushWay[NUMWAYS-1];

  cachefsm cachefsm(.clk, .reset, .CacheFetchLine, .CacheWriteLine, .CacheBusAck, 
					.RW, .Atomic, .CPUBusy, .IgnoreRequest,
 					.CacheHit, .VictimDirty, .CacheStall, .CacheCommitted, 
					.CacheMiss, .CacheAccess, .SelAdr, .SetValid, 
					.ClearValid, .SetDirty, .ClearDirty, .SRAMWordWriteEnable,
					.SRAMLineWriteEnable, .SelEvict, .SelFlush,
					.FlushAdrCntEn, .FlushWayCntEn, .FlushAdrCntRst,
					.FlushWayCntRst, .FlushAdrFlag, .FlushWayFlag, .FlushCache,
					.VDWriteEnable, .LRUWriteEn);
  

endmodule // dcache