cvw/pipelined/src/privileged/privmode.sv

///////////////////////////////////////////
// privmode.sv
//
// Written: David_Harris@hmc.edu 12 May 2022
// Modified: 
//
// Purpose: Track privilege mode
//          See RISC-V Privileged Mode Specification 20190608 3.1.10-11
// 
// A component of the CORE-V-WALLY configurable RISC-V project.
// 
// Copyright (C) 2021-23 Harvey Mudd College & Oklahoma State University
//
// SPDX-License-Identifier: Apache-2.0 WITH SHL-2.1
//
// Licensed under the Solderpad Hardware License v 2.1 (the “License”); you may not use this file 
// except in compliance with the License, or, at your option, the Apache License version 2.0. You 
// may obtain a copy of the License at
//
// https://solderpad.org/licenses/SHL-2.1/
//
// Unless required by applicable law or agreed to in writing, any work distributed under the 
// License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, 
// either express or implied. See the License for the specific language governing permissions 
// and limitations under the License.
////////////////////////////////////////////////////////////////////////////////////////////////

`include "wally-config.vh"

module privmode (
  input  logic             clk, reset,
  input  logic             StallW, TrapM, mretM, sretM,
  input  logic             DelegateM,
  input  logic [1:0]       STATUS_MPP,
  input  logic             STATUS_SPP,
  output logic [1:0]       NextPrivilegeModeM, PrivilegeModeW
); 
  
  if (`U_SUPPORTED) begin:privmode
    // PrivilegeMode FSM
    always_comb begin
      if (TrapM) begin // Change privilege based on DELEG registers (see 3.1.8)
        if (`S_SUPPORTED & DelegateM) NextPrivilegeModeM = `S_MODE;
        else                          NextPrivilegeModeM = `M_MODE;
      end else if (mretM)             NextPrivilegeModeM = STATUS_MPP;
      else if (sretM)                 NextPrivilegeModeM = {1'b0, STATUS_SPP};
      else                            NextPrivilegeModeM = PrivilegeModeW;
    end

    flopenl #(2) privmodereg(clk, reset, ~StallW, NextPrivilegeModeM, `M_MODE, PrivilegeModeW);
  end else begin  // only machine mode supported
    assign NextPrivilegeModeM = `M_MODE;
    assign PrivilegeModeW = `M_MODE;
  end
endmodule