mirror of
https://github.com/openhwgroup/cvw
synced 2025-02-03 18:25:27 +00:00
b1f7a5768f
Added git submodule for the flash card in addins. Replicated flash card top level for our changes into the fpga/src directory.
126 lines
5.0 KiB
Tcl
126 lines
5.0 KiB
Tcl
# start by reading in all the IP blocks generated by vivado
|
|
|
|
set partNumber $::env(XILINX_PART)
|
|
set boardName $::env(XILINX_BOARD)
|
|
set boardSubName [lindex [split ${boardName} :] 1]
|
|
set board $::env(board)
|
|
|
|
set ipName WallyFPGA
|
|
|
|
create_project $ipName . -force -part $partNumber
|
|
if {$boardName!="ArtyA7"} {
|
|
set_property board_part $boardName [current_project]
|
|
}
|
|
|
|
# read package first
|
|
read_verilog -sv ../src/CopiedFiles_do_not_add_to_repo/cvw.sv
|
|
read_verilog -sv ../src/wallypipelinedsocwrapper.sv
|
|
# then read top level
|
|
if {$board=="ArtyA7"} {
|
|
read_verilog {../src/fpgaTopArtyA7.v}
|
|
} else {
|
|
read_verilog {../src/fpgaTop.v}
|
|
}
|
|
|
|
# read in ip
|
|
read_ip IP/xlnx_proc_sys_reset.srcs/sources_1/ip/xlnx_proc_sys_reset/xlnx_proc_sys_reset.xci
|
|
read_ip IP/xlnx_ahblite_axi_bridge.srcs/sources_1/ip/xlnx_ahblite_axi_bridge/xlnx_ahblite_axi_bridge.xci
|
|
read_ip IP/xlnx_axi_clock_converter.srcs/sources_1/ip/xlnx_axi_clock_converter/xlnx_axi_clock_converter.xci
|
|
# Added crossbar - Jacob Pease <2023-01-12 Thu>
|
|
read_ip IP/xlnx_axi_crossbar.srcs/sources_1/ip/xlnx_axi_crossbar/xlnx_axi_crossbar.xci
|
|
read_ip IP/xlnx_axi_dwidth_conv_32to64.srcs/sources_1/ip/xlnx_axi_dwidth_conv_32to64/xlnx_axi_dwidth_conv_32to64.xci
|
|
read_ip IP/xlnx_axi_dwidth_conv_64to32.srcs/sources_1/ip/xlnx_axi_dwidth_conv_64to32/xlnx_axi_dwidth_conv_64to32.xci
|
|
read_ip IP/xlnx_axi_prtcl_conv.srcs/sources_1/ip/xlnx_axi_prtcl_conv/xlnx_axi_prtcl_conv.xci
|
|
|
|
if {$board=="ArtyA7"} {
|
|
read_ip IP/xlnx_ddr3.srcs/sources_1/ip/xlnx_ddr3/xlnx_ddr3.xci
|
|
read_ip IP/xlnx_mmcm.srcs/sources_1/ip/xlnx_mmcm/xlnx_mmcm.xci
|
|
} else {
|
|
read_ip IP/xlnx_ddr4.srcs/sources_1/ip/xlnx_ddr4/xlnx_ddr4.xci
|
|
}
|
|
|
|
# read in all other rtl
|
|
read_verilog -sv [glob -type f ../src/CopiedFiles_do_not_add_to_repo/*/*.sv ../src/CopiedFiles_do_not_add_to_repo/*/*/*.sv]
|
|
# *** Once the sdc is updated to use ahb changes these to system verilog.
|
|
read_verilog [glob -type f ../src/axi_sdc_controller.v]
|
|
read_verilog [glob -type f ../../addins/vivado-risc-v/sdc/sd_cmd_master.v]
|
|
read_verilog [glob -type f ../../addins/vivado-risc-v/sdc/sd_cmd_serial_host.v]
|
|
read_verilog [glob -type f ../../addins/vivado-risc-v/sdc/sd_data_master.v]
|
|
read_verilog [glob -type f ../../addins/vivado-risc-v/sdc/sd_data_serial_host.v]
|
|
|
|
set_property include_dirs {../../config/fpga ../../config/shared ../../addins/vivado-risc-v/sdc} [current_fileset]
|
|
|
|
if {$board=="ArtyA7"} {
|
|
add_files -fileset constrs_1 -norecurse ../constraints/constraints-$board.xdc
|
|
set_property PROCESSING_ORDER NORMAL [get_files ../constraints/constraints-$board.xdc]
|
|
} else {
|
|
add_files -fileset constrs_1 -norecurse ../constraints/constraints-$boardSubName.xdc
|
|
set_property PROCESSING_ORDER NORMAL [get_files ../constraints/constraints-$boardSubName.xdc]
|
|
}
|
|
|
|
# define top level
|
|
set_property top fpgaTop [current_fileset]
|
|
|
|
update_compile_order -fileset sources_1
|
|
# This is important as the ddr3/4 IP contains the generate clock constraint which the user constraints depend on.
|
|
exec mkdir -p reports/
|
|
exec rm -rf reports/*
|
|
|
|
report_compile_order -constraints > reports/compile_order.rpt
|
|
|
|
# this is elaboration not synthesis.
|
|
synth_design -rtl -name rtl_1
|
|
|
|
report_clocks -file reports/clocks.rpt
|
|
|
|
# Temp
|
|
set_param messaging.defaultLimit 100000
|
|
|
|
# this does synthesis?
|
|
|
|
launch_runs synth_1 -jobs 4
|
|
|
|
wait_on_run synth_1
|
|
open_run synth_1
|
|
|
|
check_timing -verbose -file reports/check_timing.rpt
|
|
report_timing -max_paths 10 -nworst 10 -delay_type max -sort_by slack -file reports/timing_WORST_10.rpt
|
|
report_timing -nworst 1 -delay_type max -sort_by group -file reports/timing.rpt
|
|
report_utilization -hierarchical -file reports/utilization.rpt
|
|
report_cdc -file reports/cdc.rpt
|
|
report_clock_interaction -file reports/clock_interaction.rpt
|
|
|
|
write_verilog -force -mode funcsim sim/syn-funcsim.v
|
|
|
|
if {$board=="ArtyA7"} {
|
|
source ../constraints/small-debug.xdc
|
|
|
|
} else {
|
|
source ../constraints/vcu-small-debug.xdc
|
|
}
|
|
|
|
|
|
# set for RuntimeOptimized implementation
|
|
#set_property "steps.place_design.args.directive" "RuntimeOptimized" [get_runs impl_1]
|
|
#set_property "steps.route_design.args.directive" "RuntimeOptimized" [get_runs impl_1]
|
|
|
|
launch_runs impl_1
|
|
wait_on_run impl_1
|
|
launch_runs impl_1 -to_step write_bitstream
|
|
wait_on_run impl_1
|
|
open_run impl_1
|
|
|
|
# output Verilog netlist + SDC for timing simulation
|
|
exec mkdir -p sim/
|
|
exec rm -rf sim/*
|
|
|
|
write_verilog -force -mode funcsim sim/imp-funcsim.v
|
|
write_verilog -force -mode timesim sim/imp-timesim.v
|
|
write_sdf -force sim/imp-timesim.sdf
|
|
|
|
# reports
|
|
check_timing -file reports/imp_check_timing.rpt
|
|
report_timing -max_paths 10 -nworst 10 -delay_type max -sort_by slack -file reports/imp_timing_WORST_10.rpt
|
|
report_timing -nworst 1 -delay_type max -sort_by group -file reports/imp_timing.rpt
|
|
report_utilization -hierarchical -file reports/imp_utilization.rpt
|