mirror of
https://github.com/openhwgroup/cvw
synced 2025-01-23 21:14:37 +00:00
61 lines
2.4 KiB
Systemverilog
61 lines
2.4 KiB
Systemverilog
///////////////////////////////////////////
|
|
// watchdog.sv
|
|
//
|
|
// Written: Rose Thompson rose@rosethompson.net
|
|
// Modified: 14 June 2023
|
|
//
|
|
// Purpose: Detects if the processor is stuck and halts the simulation
|
|
//
|
|
// A component of the Wally configurable RISC-V project.
|
|
//
|
|
// Copyright (C) 2021 Harvey Mudd College & Oklahoma State University
|
|
//
|
|
// SPDX-License-Identifier: Apache-2.0 WITH SHL-2.1
|
|
//
|
|
// Licensed under the Solderpad Hardware License v 2.1 (the “License”); you may not use this file
|
|
// except in compliance with the License, or, at your option, the Apache License version 2.0. You
|
|
// may obtain a copy of the License at
|
|
//
|
|
// https://solderpad.org/licenses/SHL-2.1/
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, any work distributed under the
|
|
// License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
|
|
// either express or implied. See the License for the specific language governing permissions
|
|
// and limitations under the License.
|
|
////////////////////////////////////////////////////////////////////////////////////////////////
|
|
|
|
module watchdog #(parameter XLEN, WatchDogTimerThreshold)
|
|
(input clk,
|
|
input reset,
|
|
string TEST
|
|
);
|
|
|
|
// check for hang up.
|
|
logic [XLEN-1:0] PCM, PCW, OldPCW;
|
|
integer WatchDogTimerCount;
|
|
logic WatchDogTimeOut;
|
|
|
|
flopenr #(XLEN) PCMReg(clk, reset, ~dut.core.ifu.StallM, dut.core.ifu.PCE, PCM); // duplicate PCM register because it is not in ifu for all configurations
|
|
flopenr #(XLEN) PCWReg(clk, reset, ~dut.core.ieu.dp.StallW, PCM, PCW);
|
|
|
|
always_ff @(posedge clk) begin
|
|
OldPCW <= PCW;
|
|
if(OldPCW == PCW) WatchDogTimerCount = WatchDogTimerCount + 1'b1;
|
|
else WatchDogTimerCount = 0;
|
|
end
|
|
|
|
always_comb begin
|
|
WatchDogTimeOut = WatchDogTimerCount >= WatchDogTimerThreshold;
|
|
if(WatchDogTimeOut) begin
|
|
if (TEST == "buildroot") $display("Watch Dog Time Out triggered. This is a normal termination for a full buildroot boot. Check sim/<simulator>/logs/buildroot_uart.log to check if the boot printed the login prompt.");
|
|
else $display("FAILURE: Watch Dog Time Out triggered. PCW stuck at %x for more than %d cycles", PCW, WatchDogTimerCount);
|
|
`ifdef QUESTA
|
|
$stop; // if this is changed to $finish for Questa, wally-batch.do does not go to the next step to run coverage, and wally.do terminates without allowing GUI debug
|
|
`else
|
|
$finish;
|
|
`endif
|
|
end
|
|
end
|
|
|
|
endmodule
|