mirror of
https://github.com/openhwgroup/cvw
synced 2025-02-11 06:05:49 +00:00
134 lines
4.6 KiB
Docker
Executable File
134 lines
4.6 KiB
Docker
Executable File
###########################################
|
|
## Dockerfile
|
|
##
|
|
## Written: james.stine@okstate.edu 28 January 2023
|
|
## Modified:
|
|
##
|
|
## Purpose: Dockerfile for Wally docker container creation
|
|
##
|
|
## A component of the CORE-V-WALLY configurable RISC-V project.
|
|
## https://github.com/openhwgroup/cvw
|
|
##
|
|
## Copyright (C) 2021-23 Harvey Mudd College & Oklahoma State University
|
|
##
|
|
## SPDX-License-Identifier: Apache-2.0 WITH SHL-2.1
|
|
##
|
|
## Licensed under the Solderpad Hardware License v 2.1 (the “License”); you may not use this file
|
|
## except in compliance with the License, or, at your option, the Apache License version 2.0. You
|
|
## may obtain a copy of the License at
|
|
##
|
|
## https:##solderpad.org#licenses#SHL-2.1#
|
|
##
|
|
## Unless required by applicable law or agreed to in writing, any work distributed under the
|
|
## License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
|
|
## either express or implied. See the License for the specific language governing permissions
|
|
## and limitations under the License.
|
|
################################################################################################
|
|
# Compliance Development Environment Image
|
|
FROM debian
|
|
|
|
# UPDATE / UPGRADE
|
|
RUN apt update
|
|
|
|
# INSTALL
|
|
RUN apt install -y git gawk make texinfo bison flex build-essential python3 libz-dev libexpat-dev autoconf device-tree-compiler ninja-build libpixman-1-dev build-essential ncurses-base ncurses-bin libncurses5-dev dialog curl wget ftp libgmp-dev python3-pip pkg-config libglib2.0-dev opam build-essential z3 pkg-config zlib1g-dev verilator cpio bc vim emacs gedit nano
|
|
|
|
RUN pip3 install chardet==3.0.4
|
|
RUN pip3 install urllib3==1.22
|
|
RUN pip3 install testresources
|
|
RUN pip3 install riscof --ignore-installed PyYAML
|
|
RUN echo "root:wally" | chpasswd
|
|
|
|
# ADD RISCV
|
|
WORKDIR /opt/riscv
|
|
|
|
# Create a user group 'xyzgroup'
|
|
ARG USERNAME=cad
|
|
ARG USER_UID=1000
|
|
ARG USER_GID=$USER_UID
|
|
|
|
# Create the user
|
|
RUN groupadd --gid $USER_GID $USERNAME \
|
|
&& useradd --uid $USER_UID --gid $USER_GID -m $USERNAME \
|
|
# [Optional] Add sudo support. Omit if you don't need to install software after connecting.
|
|
&& apt-get update \
|
|
&& apt-get install -y sudo \
|
|
&& echo $USERNAME ALL=\(root\) NOPASSWD:ALL > /etc/sudoers.d/$USERNAME \
|
|
&& chmod 0440 /etc/sudoers.d/$USERNAME
|
|
|
|
# Change RISCV user
|
|
run chown -Rf cad:cad /opt
|
|
|
|
# Add cad user
|
|
USER $USERNAME
|
|
|
|
# SET ENVIRONMENT VARIABLES
|
|
ENV RISCV=/opt/riscv
|
|
ENV PATH=$PATH:$RISCV/bin
|
|
|
|
# TOOLCHAIN
|
|
RUN git clone https://github.com/riscv/riscv-gnu-toolchain && \
|
|
cd riscv-gnu-toolchain && \
|
|
./configure --prefix=${RISCV} --enable-multilib --with-multilib-generator="rv32e-ilp32e--;rv32i-ilp32--;rv32im-ilp32--;rv32iac-ilp32--;rv32imac-ilp32--;rv32imafc-ilp32f--;rv32imafdc-ilp32d--;rv64i-lp64--;rv64ic-lp64--;rv64iac-lp64--;rv64imac-lp64--;rv64imafdc-lp64d--;rv64im-lp64--;" && \
|
|
make --jobs && \
|
|
make install
|
|
|
|
# elf2hex
|
|
ENV PATH=$RISCV/riscv-gnu-toolchain/bin:$PATH
|
|
WORKDIR /opt/riscv
|
|
RUN git clone https://github.com/sifive/elf2hex.git && \
|
|
cd elf2hex && \
|
|
autoreconf -i && \
|
|
./configure --target=riscv64-unknown-elf --prefix=$RISCV && \
|
|
make && \
|
|
make install
|
|
|
|
# QEMU
|
|
WORKDIR /opt/riscv
|
|
RUN git clone --recurse-submodules https://github.com/qemu/qemu && \
|
|
cd qemu && \
|
|
./configure --target-list=riscv64-softmmu --prefix=$RISCV && \
|
|
make --jobs && \
|
|
make install
|
|
|
|
# Spike
|
|
WORKDIR /opt/riscv
|
|
RUN git clone https://github.com/riscv-software-src/riscv-isa-sim && \
|
|
mkdir riscv-isa-sim/build && \
|
|
cd riscv-isa-sim/build && \
|
|
../configure --prefix=$RISCV --enable-commitlog && \
|
|
make --jobs && \
|
|
make install && \
|
|
cd ../arch_test_target/spike/device && \
|
|
sed -i 's/--isa=rv32ic/--isa=rv32iac/' rv32i_m/privilege/Makefile.include && \
|
|
sed -i 's/--isa=rv64ic/--isa=rv64iac/' rv64i_m/privilege/Makefile.include
|
|
|
|
# SAIL
|
|
WORKDIR /opt/riscv
|
|
RUN opam init -y --disable-sandboxing
|
|
RUN opam switch create ocaml-base-compiler.4.06.1
|
|
RUN opam install sail -y
|
|
RUN eval $(opam config env) && \
|
|
cd $RISCV && \
|
|
git clone https://github.com/riscv/sail-riscv.git && \
|
|
cd sail-riscv && \
|
|
make && \
|
|
ARCH=RV32 make && \
|
|
ARCH=RV64 make && \
|
|
ln -s $RISCV/sail-riscv/c_emulator/riscv_sim_RV64 $RISCV/bin/riscv_sim_RV64 && \
|
|
ln -s $RISCV/sail-riscv/c_emulator/riscv_sim_RV32 $RISCV/bin/riscv_sim_RV32
|
|
|
|
# Buildroot
|
|
WORKDIR /opt/riscv
|
|
RUN git clone --recurse-submodules https://github.com/openhwgroup/cvw.git
|
|
ENV export WALLY=/opt/riscv/riscv-wally
|
|
RUN git clone https://github.com/buildroot/buildroot.git && \
|
|
cd buildroot && \
|
|
git checkout 2021.05 && \
|
|
cp -r /opt/riscv/riscv-wally/linux/buildroot-config-src/wally ./board && \
|
|
cp ./board/wally/main.config .config && \
|
|
make --jobs
|
|
|
|
# change to cad's hometown
|
|
WORKDIR /home/cad
|