mirror of
https://github.com/openhwgroup/cvw
synced 2025-02-11 06:05:49 +00:00
Well on the way to a fully automated FPGA build process which
correctly sets the clocks and memory locations.
This commit is contained in:
Rose Thompson
parent
f1d9e18dee
commit
2e55f1cecc
@ -8,19 +8,22 @@ ArtyA7: export XILINX_PART := xc7a100tcsg324-1
|
||||
ArtyA7: export XILINX_BOARD := digilentinc.com:arty-a7-100:part0:1.1
|
||||
ArtyA7: export board := ArtyA7
|
||||
ArtyA7: FPGA_Arty
|
||||
ArtyA7: CLOCK := 20000000
|
||||
|
||||
vcu118: export XILINX_PART := xcvu9p-flga2104-2L-e
|
||||
vcu118: export XILINX_BOARD := xilinx.com:vcu118:part0:2.4
|
||||
vcu118: export board := vcu118
|
||||
vcu118: FPGA_VCU
|
||||
vcu118: CLOCK := 71000000
|
||||
|
||||
vcu108: export XILINX_PART := xcvu095-ffva2104-2-e
|
||||
vcu108: export XILINX_BOARD := xilinx.com:vcu108:part0:1.7
|
||||
vcu108: export board := vcu108
|
||||
vcu108: FPGA_VCU
|
||||
vcu108: CLOCK := 50000000
|
||||
|
||||
.PHONY: FPGA_Arty FPGA_VCU
|
||||
FPGA_Arty: PreProcessFiles IP_Arty
|
||||
FPGA_Arty: PreProcessFiles IP_Arty zsbl
|
||||
vivado -mode tcl -source wally.tcl 2>&1 | tee wally.log
|
||||
FPGA_VCU: PreProcessFiles IP_VCU
|
||||
vivado -mode tcl -source wally.tcl 2>&1 | tee wally.log
|
||||
@ -60,6 +63,11 @@ PreProcessFiles:
|
||||
sed -i 's/$$WALLY/\.\.\/\.\.\/\.\.\//g' ../src/CopiedFiles_do_not_add_to_repo/generic/mem/rom1p1r.sv
|
||||
sed -i 's/$$WALLY/\.\.\/\.\.\/\.\.\//g' ../src/CopiedFiles_do_not_add_to_repo/generic/mem/ram1p1rwbe.sv
|
||||
|
||||
# build the Zero stage boot loader (ZSBL)
|
||||
.PHONE: zsbl
|
||||
zsbl:
|
||||
CLOCK = CLOCK $(MAKE) -C ../zsbl
|
||||
|
||||
# Generate Individual IP Blocks
|
||||
$(dst)/%.log: %.tcl
|
||||
mkdir -p IP
|
||||
|
||||
@ -1,6 +1,7 @@
|
||||
|
||||
set partNumber $::env(XILINX_PART)
|
||||
set boardName $::env(XILINX_BOARD)
|
||||
set CPUClock $::env(CLOCK)
|
||||
#set partNumber xcvu9p-flga2104-2L-e
|
||||
#set boardName xilinx.com:vcu118:part0:2.4
|
||||
|
||||
@ -38,7 +39,7 @@ set_property -dict [list CONFIG.C0.ControllerType {DDR4_SDRAM} \
|
||||
CONFIG.C0.DDR4_AxiNarrowBurst {false} \
|
||||
CONFIG.Reference_Clock {Differential} \
|
||||
CONFIG.ADDN_UI_CLKOUT1.INSERT_VIP {0} \
|
||||
CONFIG.ADDN_UI_CLKOUT1_FREQ_HZ {50} \
|
||||
CONFIG.ADDN_UI_CLKOUT1_FREQ_HZ {$CPUClock} \
|
||||
CONFIG.ADDN_UI_CLKOUT2.INSERT_VIP {0} \
|
||||
CONFIG.ADDN_UI_CLKOUT2_FREQ_HZ {300} \
|
||||
CONFIG.ADDN_UI_CLKOUT3.INSERT_VIP {0} \
|
||||
|
||||
@ -1,6 +1,7 @@
|
||||
|
||||
set partNumber $::env(XILINX_PART)
|
||||
set boardName $::env(XILINX_BOARD)
|
||||
set CPUClock $::env(CLOCK)
|
||||
#set partNumber xcvu9p-flga2104-2L-e
|
||||
#set boardName xilinx.com:vcu118:part0:2.4
|
||||
|
||||
@ -38,7 +39,7 @@ set_property -dict [list CONFIG.C0.ControllerType {DDR4_SDRAM} \
|
||||
CONFIG.C0.DDR4_AxiNarrowBurst {false} \
|
||||
CONFIG.Reference_Clock {Differential} \
|
||||
CONFIG.ADDN_UI_CLKOUT1.INSERT_VIP {0} \
|
||||
CONFIG.ADDN_UI_CLKOUT1_FREQ_HZ {71} \
|
||||
CONFIG.ADDN_UI_CLKOUT1_FREQ_HZ {$CPUClock} \
|
||||
CONFIG.ADDN_UI_CLKOUT2.INSERT_VIP {0} \
|
||||
CONFIG.ADDN_UI_CLKOUT2_FREQ_HZ {300} \
|
||||
CONFIG.ADDN_UI_CLKOUT3.INSERT_VIP {0} \
|
||||
|
||||
@ -27,11 +27,16 @@ MABI :=-mabi=lp64d
|
||||
LINK_FLAGS :=$(MARCH) $(MABI) -nostartfiles -L $(RISCV)/riscv64-unknown-elf/lib
|
||||
LINKER :=linker1000.x
|
||||
|
||||
# FGPA parameters
|
||||
CLOCK ?= 20000000
|
||||
MEMSTART ?= 0x80000000
|
||||
MEMSIZE ?= 0x10000000
|
||||
|
||||
|
||||
AFLAGS =$(MARCH) $(MABI) -W
|
||||
# Override directive allows us to prepend other options on the command line
|
||||
# e.g. $ make CFLAGS=-g
|
||||
override CFLAGS +=$(MARCH) $(MABI) -mcmodel=medany -O2 -g
|
||||
override CFLAGS +=$(MARCH) $(MABI) -mcmodel=medany -O2 -g -DSYSTEMCLOCK=${CLOCK} -DMEMSTART=${MEMSTART} -DMEMSIZE=${MEMSIZE}
|
||||
AS=riscv64-unknown-elf-as
|
||||
CC=riscv64-unknown-elf-gcc
|
||||
AR=riscv64-unknown-elf-ar
|
||||
|
||||
101
fpga/zsbl/bios.s
101
fpga/zsbl/bios.s
@ -1,101 +0,0 @@
|
||||
PERIOD = 11000000
|
||||
#PERIOD = 20
|
||||
|
||||
.section .init
|
||||
.global _start
|
||||
.type _start, @function
|
||||
|
||||
|
||||
_start:
|
||||
# Initialize global pointer
|
||||
.option push
|
||||
.option norelax
|
||||
1:auipc gp, %pcrel_hi(__global_pointer$)
|
||||
addi gp, gp, %pcrel_lo(1b)
|
||||
.option pop
|
||||
|
||||
li x1, 0
|
||||
li x2, 0
|
||||
li x4, 0
|
||||
li x5, 0
|
||||
li x6, 0
|
||||
li x7, 0
|
||||
li x8, 0
|
||||
li x9, 0
|
||||
li x10, 0
|
||||
li x11, 0
|
||||
li x12, 0
|
||||
li x13, 0
|
||||
li x14, 0
|
||||
li x15, 0
|
||||
li x16, 0
|
||||
li x17, 0
|
||||
li x18, 0
|
||||
li x19, 0
|
||||
li x20, 0
|
||||
li x21, 0
|
||||
li x22, 0
|
||||
li x23, 0
|
||||
li x24, 0
|
||||
li x25, 0
|
||||
li x26, 0
|
||||
li x27, 0
|
||||
li x28, 0
|
||||
li x29, 0
|
||||
li x30, 0
|
||||
li x31, 0
|
||||
|
||||
|
||||
# set the stack pointer to the top of memory - 8 bytes (pointer size)
|
||||
li sp, 0x87FFFFF8
|
||||
|
||||
li a0, 0x00000000
|
||||
li a1, 0x80000000
|
||||
#li a2, 128*1024*1024/512 # copy 128MB
|
||||
li a2, 127*1024*1024/512 # copy 127MB upper 1MB contains the return address (ra)
|
||||
#li a2, 800 # copy 400KB
|
||||
jal ra, copyFlash
|
||||
|
||||
fence.i
|
||||
# now toggle led so we know the copy completed.
|
||||
|
||||
# write to gpio
|
||||
li t2, 0xFF
|
||||
la t3, 0x1006000C
|
||||
li t4, 5
|
||||
|
||||
loop:
|
||||
|
||||
# delay
|
||||
li t0, PERIOD/2
|
||||
delay1:
|
||||
addi t0, t0, -1
|
||||
bge t0, x0, delay1
|
||||
sw t2, 0x0(t3)
|
||||
|
||||
li t0, PERIOD/2
|
||||
delay2:
|
||||
addi t0, t0, -1
|
||||
bge t0, x0, delay2
|
||||
sw x0, 0x0(t3)
|
||||
|
||||
addi t4, t4, -1
|
||||
bgt t4, x0, loop
|
||||
|
||||
|
||||
# now that the card is copied and the led toggled we
|
||||
# jump to the copied contents of the sd card.
|
||||
|
||||
jumpToLinux:
|
||||
csrrs a0, 0xF14, x0 # copy hart ID to a0
|
||||
li a1, 0x87000000 # end of memory? not 100% sure on this but it's 112MB
|
||||
la a2, end_of_bios
|
||||
li t0, 0x80000000 # start of code
|
||||
|
||||
jalr x0, t0, 0
|
||||
|
||||
end_of_bios:
|
||||
|
||||
|
||||
|
||||
|
||||
@ -31,6 +31,7 @@
|
||||
#define WALLYBOOT 10000
|
||||
|
||||
#include <stdint.h>
|
||||
#include "system.h"
|
||||
typedef unsigned int UINT; /* int must be 16-bit or 32-bit */
|
||||
typedef unsigned char BYTE; /* char must be 8-bit */
|
||||
typedef uint16_t WORD; /* 16-bit unsigned integer */
|
||||
@ -44,7 +45,7 @@ typedef QWORD LBA_t;
|
||||
// These locations are copied from the generic configuration
|
||||
// of OpenSBI. These addresses can be found in:
|
||||
// buildroot/output/build/opensbi-0.9/platform/generic/config.mk
|
||||
#define FDT_ADDRESS 0x87000000 // FW_JUMP_FDT_ADDR
|
||||
#define FDT_ADDRESS 0xFF000000 // FW_JUMP_FDT_ADDR
|
||||
#define OPENSBI_ADDRESS 0x80000000 // FW_TEXT_START
|
||||
#define KERNEL_ADDRESS 0x80200000 // FW_JUMP_ADDR
|
||||
|
||||
@ -61,11 +62,12 @@ typedef QWORD LBA_t;
|
||||
// Export disk_read
|
||||
int disk_read(BYTE * buf, LBA_t sector, UINT count);
|
||||
|
||||
#define SYSTEMCLOCK 20000000
|
||||
//#define SYSTEMCLOCK 50000000
|
||||
// *** fix me: now defined in system.h
|
||||
|
||||
// TODO: This line needs to change back to 20MHz when we fix the
|
||||
// timing problems.
|
||||
#define MAXSDCCLOCK 5000000
|
||||
#define MAXSDCCLOCK 12500000
|
||||
|
||||
// Maximum SDC speed is either the system clock divided by 2 (because
|
||||
// of the SPI peripheral clock division) or the maximum speed an SD
|
||||
|
||||
Loading…
Reference in New Issue
Block a user