/////////////////////////////////////////// // // WALLY-MMU // // Author: David_Harris@hmc.edu and Kip Macsai-Goren // // Created 2021-06-15 // // Copyright (C) 2021 Harvey Mudd College & Oklahoma State University // // Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation // files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, // modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software // is furnished to do so, subject to the following conditions: // // The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. // // THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES // OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS // BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT // OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. /////////////////////////////////////////// #include "WALLY-TEST-LIB-32.h" // Test library includes and handler for each type of test, a trap handler, imperas compliance instructions // Ideally this should mean that a test can be written by simply adding .8byte statements as below. # --------------------------------------------------------------------------------------------- # Test Contents # # Here is where the actual tests are held, or rather, what the actual tests do. # each entry consists of 3 values that will be read in as follows: # # '.8byte [x28 Value], [x29 Value], [x30 value]' # or # '.8byte [address], [value], [test type]' # # The encoding for x30 test type values can be found in the test handler in the framework file # # --------------------------------------------------------------------------------------------- # =========== test 12.3.1.1 Page Table Translation =========== # test 12.3.1.1.1 write page tables / entries to phyiscal memory # sv32 Page table (See Figure 12.12***): # Level 1 page table, situated at 0x8000D000 .4byte 0x8000D000, 0x20004C01, write32_test # points to level 0 page table A .4byte 0x8000D004, 0x200000CB, write32_test # Vaddr 0x400000 Paddr 0x80000000: aligned megapage, W=0, used for execute tests .4byte 0x8000D008, 0x20005401, write32_test # points to level 0 page table B .4byte 0x8000D00C, 0x000800C7, write32_test # Vaddr 0xC00000: misaligned megapage .4byte 0x8000D800, 0x200000CF, write32_test # Vaddr 0x80000000 Paddr 0x80000000: aligned megapage (program and data memory) .4byte 0x8000D804, 0x200000DF, write32_test # Vaddr 0x80400000 Paddr 0x80000000: aligned megapage, U=1 (aliased with program and data memory) # Level 0 page table A .4byte 0x80013000, 0x20007001, write32_test # Vaddr 0x0000: bad PTE points to level -1 table .4byte 0x80013004, 0x202000DF, write32_test # Vaddr 0x1000 Paddr 0x80800000: aligned kilopage, U=1 .4byte 0x80013008, 0x202010D5, write32_test # Vaddr 0x2000: pad PTE has W but not R .4byte 0x8001300C, 0x20200817, write32_test # Vaddr 0x3000: A=0, should cause read fault .4byte 0x80013010, 0x20200C57, write32_test # Vaddr 0x4000: D=0, should cause write fault .4byte 0x80013014, 0x202014C9, write32_test # Vaddr 0x5000 Paddr 80805000: aligned kilopage, W=R=0 .4byte 0x80013018, 0x0, write32_test # Vaddr 0x6000: invalid page # Level 0 page table B .4byte 0x80015FFC, 0x202004C7, write32_test # Vaddr 0xBFF000 Paddr 0x80801000: aligned kilopage with X=0, U=0 # test 12.3.1.1.2 write values to Paddrs in each page # each of these values is used for 12.3.1.1.3 and some other tests, specified in the comments. # when a test is supposed to fault, nothing is written into where it'll be reading/executing since it should fault before getting there. .4byte 0x800AAAA8, 0xBEEF0055, write32_test # 12.3.1.1.4 megapage .4byte 0x800FFAC0, 0xBEEF0033, write32_test # 12.3.1.3.2 .4byte 0x800E3130, 0xBEEF0077, write32_test # 12.3.1.3.2 .4byte 0x808017E0, 0xBEEF0099, write32_test # 12.3.1.1.4 kilopage .4byte 0x80805EA0, 0xBEEF0440, write32_test # 12.3.1.3.3 .4byte 0x80803AA0, 0xBEEF0BB0, write32_test # 12.3.1.3.7 .4byte 0x8000FFA0, 0x11100393, write32_test # write executable code for "li x7, 0x111; ret" to executable region. .4byte 0x8000FFA4, 0x00008067, write32_test # Used for 12.3.1.3.1, 12.3.1.3.2 # test 12.3.1.1.3 read values back from Paddrs without translation (this also verifies the previous test) .4byte 0x0, 0x0, goto_baremetal # satp.MODE = baremetal / no translation. .4byte 0x0, 0x0, goto_s_mode # change to S mode, 0xb written to output .4byte 0x800AAAA8, 0xBEEF0055, read32_test .4byte 0x800FFAC0, 0xBEEF0033, read32_test .4byte 0x800E3130, 0xBEEF0077, read32_test .4byte 0x808017E0, 0xBEEF0099, read32_test .4byte 0x80805EA0, 0xBEEF0440, read32_test .4byte 0x80803AA0, 0xBEEF0BB0, read32_test .4byte 0x8000FFA0, 0x11100393, read32_test .4byte 0x8000FFA4, 0x00008067, read32_test # test 12.3.1.1.4 check translation works in sv48, read the same values from previous tests, this time with Vaddrs .4byte 0x0, 0x0, goto_sv32 # satp.MODE = sv32, Nothing written to output .4byte 0x4AAAA8, 0xBEEF0055, read32_test # megapage at Vaddr 0x400000, Paddr 0x80000000 .4byte 0xBFF7E0, 0xBEEF0099, read32_test # kilopage at Vaddr 0xBFF000, Paddr 0x80201000 # =========== test 12.3.1.2 page fault tests =========== # test 12.3.1.2.1 load page fault if upper bits of Vaddr are not the same # Not tested in rv32/sv32 # test 12.3.1.2.2 load page fault when reading an address where the valid flag is zero .4byte 0x6000, 0x0, read32_test # test 12.3.1.2.3 store page fault if PTE has W and ~R flags set .4byte 0x2000, 0x0, write32_test # test 12.3.1.2.4 Fault if last level PTE is a pointer .4byte 0x0200, 0x0, read32_test # test 12.3.1.2.5 load page fault on misaligned pages .4byte 0xC00000, 0x0, read32_test # misaligned megapage # =========== test 12.3.1.3 PTE Protection flags =========== # test 12.3.1.3.1 User flag == 0 # *** reads on pages with U=0 already tested in 12.3.1.1.4 .4byte 0x40FFA0, 0x111, executable_test # fetch success when U=0, priv=S .4byte 0x80400000, 0x1, goto_u_mode # go to U mode, return to VPN 0x80400000 where PTE.U = 1. 0x9 written to output .4byte 0xBFFC80, 0xBEEF0550, read32_test # load page fault when U=0, priv=U .4byte 0x40FFA0, 0xbad, executable_test # instr page fault when U=0, priv=U # test 12.3.1.3.2 User flag == 1 .4byte 0x804FFAC0, 0xBEEF0033, read32_test # read success when U=1, priv=U .4byte 0x80000000, 0x1, goto_s_mode # go back to S mode, return to VPN 0x80000000 where PTE.U = 0. 0x8 written to output .4byte 0x0, 0x3, write_mxr_sum # set sstatus.[MXR, SUM] = 11 .4byte 0x804E3130, 0xBEEF0077, read32_test # read success when U=1, priv=S, sstatus.SUM=1 .4byte 0x8040FFA0, 0xbad, executable_test # instr page fault when U=1, priv=S (with any sstatus.SUM) .4byte 0x0, 0x2, write_mxr_sum # set sstatus.[MXR, SUM] = 10. .4byte 0x804FFAC0, 0xBEEF0033, read32_test # load page fault when U-1, priv=S, sstatus.SUM=0 # test 12.3.1.3.3 Read flag # *** reads on pages with R=1 already tested in 12.3.1.1.4 .4byte 0x0, 0x1, write_mxr_sum # set sstatus.[MXR, SUM] = 01. .4byte 0x5EA0, 0xBEEF0440, read32_test # load page fault when R=0, sstatus.MXR=0 .4byte 0x0, 0x3, write_mxr_sum # set sstatus.[MXR, SUM] = 11. .4byte 0x5EA0, 0xBEEF0440, read32_test # read success when R=0, MXR=1, X=1 # test 12.3.1.3.4 Write flag .4byte 0xBFF290, 0xBEEF0110, write32_test # write success when W=1 .4byte 0xBFF290, 0xBEEF0110, read32_test # check write success by reading .4byte 0x5B78, 0xBEEF0CC0, write32_test # store page fault when W=0 # test 12.3.1.3.5 eXecute flag # *** fetches on pages with X = 1 already tested in 12.3.1.3.1 .4byte 0xBFFDE0, 0xbad, executable_test # instr page fault when X=0 # test 12.3.1.3.6 Accessed flag == 0 .4byte 0x3020, 0xBEEF0770, write32_test # store page fault when A=0 .4byte 0x3808, 0xBEEF0990, read32_test # load page fault when A=0 # test 12.3.1.3.7 Dirty flag == 0 .4byte 0x4658, 0xBEEF0AA0, write32_test # store page fault when D=0 .4byte 0x4AA0, 0xBEEF0BB0, read32_test # read success when D=0 # terminate tests .4byte 0x0, 0x0, terminate_test # brings us back into machine mode with a final ecall, writing 0x9 to the output.