# wally-coremark.do 
#
# Modification by Oklahoma State University & Harvey Mudd College
# Use with Testbench 
# James Stine, 2008; David Harris 2021
# Go Cowboys!!!!!!
#
# Takes 1:10 to run RV64IC tests using gui

# Use this wally-coremark.do file to run this example.
# Either bring up ModelSim and type the following at the "ModelSim>" prompt:
#     do wally-coremark.do
# or, to run from a shell, type the following at the shell prompt:
#     vsim -do wally-coremark.do -c
# (omit the "-c" to see the GUI while running from the shell)

onbreak {resume}

# create library
if [file exists work] {
    vdel -all
}
vlib work

# compile source files
# suppress spurious warnngs about 
# "Extra checking for conflicts with always_comb done at vopt time"
# because vsim will run vopt

# default to config/coremark, but allow this to be overridden at the command line.  For example:
vlog +incdir+../config/coremark_bare +incdir+../config/shared ../testbench/testbench-coremark_bare.sv ../testbench/common/*.sv ../src/*/*.sv -suppress 2583

# start and run simulation
# remove +acc flag for faster sim during regressions if there is no need to access internal signals
vopt +acc work.testbench -o workopt 
vsim workopt

mem load -startaddress 268435456 -endaddress 268566527 -filltype value -fillradix hex -filldata 0 /testbench/dut/uncore/dtim/RAM

view wave

-- display input and output signals as hexidecimal values
# Diplays All Signals recursively
add wave /testbench/clk
add wave /testbench/reset
add wave -divider
#add wave /testbench/dut/hart/ebu/IReadF
#add wave /testbench/dut/hart/DataStall
#add wave /testbench/dut/hart/InstrStall
#add wave /testbench/dut/hart/StallF
#add wave /testbench/dut/hart/StallD
#add wave /testbench/dut/hart/FlushD
#add wave /testbench/dut/hart/FlushE
#add wave /testbench/dut/hart/FlushM
#add wave /testbench/dut/hart/FlushW

add wave -divider Fetch
add wave -hex /testbench/dut/hart/ifu/PCF
add wave -hex /testbench/dut/hart/ifu/icache/controller/FinalInstrRawF
add wave /testbench/InstrFName
add wave -divider Decode
add wave -hex /testbench/dut/hart/ifu/PCD
add wave -hex /testbench/dut/hart/ifu/InstrD
add wave /testbench/InstrDName
add wave -divider Execute
add wave -hex /testbench/dut/hart/ifu/PCE
add wave -hex /testbench/dut/hart/ifu/InstrE
add wave /testbench/InstrEName
add wave -divider Memory
add wave -hex /testbench/dut/hart/ifu/PCM
add wave -hex /testbench/dut/hart/ifu/InstrM
add wave /testbench/InstrMName
add wave -divider Write
add wave -hex /testbench/PCW
add wave -hex /testbench/InstrW
add wave /testbench/InstrWName
#add wave -hex /testbench/dut/hart/ieu/dp/SrcAE
#add wave -hex /testbench/dut/hart/ieu/dp/SrcBE
#add wave -hex /testbench/dut/hart/ieu/dp/ALUResultE
#add wave /testbench/dut/hart/ieu/dp/PCSrcE
add wave -divider Regfile_signals
#add wave /testbench/dut/uncore/dtim/memwrite
#add wave -hex /testbench/dut/uncore/HADDR
#add wave -hex /testbench/dut/uncore/HWDATA
#add wave -divider
#add wave -hex /testbench/PCW
#add wave /testbench/InstrWName
#add wave /testbench/dut/hart/ieu/dp/RegWriteW
#add wave -hex /testbench/dut/hart/ieu/dp/ResultW
#add wave -hex /testbench/dut/hart/ieu/dp/RdW
add wave -hex -r /testbench/dut/hart/ieu/dp/regf/*
add wave -divider Regfile_itself
add wave -hex -r /testbench/dut/hart/ieu/dp/regf/rf
add wave -divider RAM
#add wave -hex -r /testbench/dut/uncore/dtim/RAM
add wave -divider Misc
add wave -divider
#add wave -hex -r /testbench/*

-- Set Wave Output Items 
TreeUpdate [SetDefaultTree]
WaveRestoreZoom {0 ps} {100 ps}
configure wave -namecolwidth 250
configure wave -valuecolwidth 120
configure wave -justifyvalue left
configure wave -signalnamewidth 0
configure wave -snapdistance 10
configure wave -datasetprefix 0
configure wave -rowmargin 4
configure wave -childrowmargin 2
set DefaultRadix hexadecimal

-- Run the Simulation 
#run 7402000
#run 12750
run -all
#run 21400
#quit