diff --git a/wally-pipelined/regression/sim-fp64 b/wally-pipelined/regression/sim-fp64
new file mode 100755
index 00000000..b6b8ba5c
--- /dev/null
+++ b/wally-pipelined/regression/sim-fp64
@@ -0,0 +1 @@
+vsim -do wally-fp64.do
diff --git a/wally-pipelined/regression/sim-fp64-batch b/wally-pipelined/regression/sim-fp64-batch
new file mode 100755
index 00000000..81ef807e
--- /dev/null
+++ b/wally-pipelined/regression/sim-fp64-batch
@@ -0,0 +1,3 @@
+vsim -c <<!
+do wally-fp64-batch.do ../config/rv64icfd rv64icfd
+!
diff --git a/wally-pipelined/testbench/testbench-f64.sv b/wally-pipelined/testbench/testbench-f64.sv
new file mode 100755
index 00000000..a9dd9ad2
--- /dev/null
+++ b/wally-pipelined/testbench/testbench-f64.sv
@@ -0,0 +1,129 @@
+// testbench
+module testbench ();
+
+   logic [63:0] op1;		
+   logic [63:0] op2;
+   logic [2:0] 	FOpCtrlE;   
+   logic [2:0] 	FrmE;
+   logic 	op_type;	
+   logic 	FmtE;   		
+   logic 	OvEn;		
+   logic 	UnEn;   	
+
+   logic 	XSgnE, YSgnE, ZSgnE;
+   logic 	XSgnM, YSgnM;     
+   logic [10:0] XExpE, YExpE, ZExpE;
+   logic [10:0] XExpM, YExpM, ZExpM;
+   logic [52:0] XManE, YManE, ZManE;
+   logic [52:0] XManM, YManM, ZManM;
+
+   logic [10:0] BiasE;
+   logic 	XNaNE, YNaNE, ZNaNE;           
+   logic 	XNaNM, YNaNM, ZNaNM;           
+   logic 	XSNaNE, YSNaNE, ZSNaNE;        
+   logic 	XSNaNM, YSNaNM, ZSNaNM;        
+   logic 	XDenormE, YDenormE, ZDenormE;  
+   logic 	XZeroE, YZeroE, ZZeroE;        
+   logic 	XZeroM, YZeroM, ZZeroM;        
+   logic 	XInfE, YInfE, ZInfE;           
+   logic 	XInfM, YInfM, ZInfM;
+   logic 	XExpMaxE;  
+   logic 	XNormE;
+   logic 	FDivBusyE;   
+   
+   logic 	start;
+   logic 	reset;
+
+   logic 	XDenorm;
+   logic 	YDenorm;   
+   logic [63:0] AS_Result;	
+   logic [4:0] 	Flags;   	
+   logic 	Denorm;   	
+   logic 	done;
+
+   logic         clk;
+   logic [63:0]  yexpected;
+   logic [63:0]  vectornum, errors;    // bookkeeping variables
+   logic [199:0] testvectors[50000:0]; // array of testvectors
+   logic [7:0] 	 flags_expected;
+
+   integer 	handle3;
+   integer 	desc3;  
+   integer 	desc4; 
+   
+   // instantiate device under test
+   unpacking unpacking(.X(op1), .Y(op2), .Z(64'h0), .FOpCtrlE, .FmtE, 
+		       .XSgnE, .YSgnE, .ZSgnE, .XExpE, .YExpE, .ZExpE, .XManE, .YManE, .ZManE, 
+		       .XNaNE, .YNaNE, .ZNaNE, .XSNaNE, .YSNaNE, .ZSNaNE, .XDenormE, .YDenormE, .ZDenormE, 
+		       .XZeroE, .YZeroE, .ZZeroE, .BiasE, .XInfE, .YInfE, .ZInfE, .XExpMaxE, .XNormE);
+   fpdiv fdivsqrt (.op1, .op2, .rm(FrmE[1:0]), .op_type(FOpCtrlE[0]),
+		   .reset, .clk, .start, .P(FmtE), .OvEn(1'b1), .UnEn(1'b1),
+		   .XNaNQ(XNaNE), .YNaNQ(YNaNE), .XInfQ(XInfE), .YInfQ(YInfE), .XZeroQ(XZeroE), .YZeroQ(YZeroE),
+		   .FDivBusyE, .done(done), .AS_Result(AS_Result), .Flags(Flags));
+
+   // current fpdivsqrt does not operation on denorms yet
+   assign XZeroM = (op1[51:0] == 52'h0);
+   assign YZeroM = (op2[51:0] == 52'h0);   
+   assign XDenorm = XZeroE & ~XZeroM;
+   assign YDenorm = YZeroE & ~YZeroM;
+   assign Denorm = XDenorm | YDenorm;   
+
+  // generate clock to sequence tests
+  always
+    begin
+      clk = 1; # 5; clk = 0; # 5;
+    end
+   
+   initial
+     begin
+	handle3 = $fopen("f64_div_rne.out");
+	$readmemh("../testbench/fp/f64_div_rne.tv", testvectors);
+	vectornum = 0; errors = 0;
+	start = 1'b0;
+	// reset
+	reset = 1; #27; reset = 0;
+     end
+
+   initial
+     begin
+	desc3 = handle3;
+	// Operation (if applicable)
+	#0  op_type = 1'b0;
+	// Precision (32-bit or 64-bit)
+	#0  FmtE = 1'b0;
+	// From fctrl logic to dictate operation
+	#0  FOpCtrlE = 3'b000;
+	// Rounding Mode
+	#0  FrmE = 3'b000;
+	// Trap masking (n/a for RISC-V)
+	#0  OvEn = 1'b0;
+	#0  UnEn = 1'b0;
+     end
+
+   always @(posedge clk)
+     begin
+	if (~reset)
+	  begin
+	     #0; {op1, op2, yexpected, flags_expected} = testvectors[vectornum];
+	     #50 start = 1'b1;
+	     repeat (2)
+	       @(posedge clk);
+	     // deassert start after 2 cycles
+	     start = 1'b0;	
+	     repeat (10)
+	       @(posedge clk);
+	     $fdisplay(desc3, "%h_%h_%h_%b_%b | %h_%b", op1, op2, AS_Result, Flags, Denorm, yexpected, (AS_Result==yexpected));
+	     vectornum = vectornum + 1;
+	     if (vectornum == 1)
+	       $finish;	     
+	     if (testvectors[vectornum] === 200'bx) begin
+		$display("%d tests completed", vectornum);
+		$finish;
+	     end
+	  end // if (~reset)
+	$display("%d vectors processed", vectornum);
+     end // always @ (posedge clk)
+   
+endmodule // tb
+
+