Github_Repos/cvw
1
0
Fork 1
mirror of https://github.com/openhwgroup/cvw synced 2025-02-02 01:44:41 +00:00
Code Issues Packages Projects Releases Wiki Activity
e441f90b32
cvw/pipelined/testbench/testbench.sv
Ross Thompson a6ffb4cef3 Added timeout check to testbench. 
A watchdog checks the value of PCW.  If it does not change within 1M cycles immediately stop simulation and report an error.
2022-12-21 09:18:00 -06:00

632 lines
29 KiB
Systemverilog
Raw Blame History

///////////////////////////////////////////
// testbench.sv
//
// Written: David_Harris@hmc.edu 9 January 2021
// Modified:
//
// Purpose: Wally Testbench and helper modules
// Applies test programs from the riscv-arch-test and Imperas suites
//
// A component of the Wally configurable RISC-V project.
//
// Copyright (C) 2021 Harvey Mudd College & Oklahoma State University
//
// MIT LICENSE
// Permission is hereby granted, free of charge, to any person obtaining a copy of this
// software and associated documentation files (the "Software"), to deal in the Software
// without restriction, including without limitation the rights to use, copy, modify, merge,
// publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons
// to whom the Software is furnished to do so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all copies or
// substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
// INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
// PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
// BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
// TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
// OR OTHER DEALINGS IN THE SOFTWARE.
////////////////////////////////////////////////////////////////////////////////////////////////
`include "wally-config.vh"
`include "tests.vh"
module testbench;
parameter DEBUG=0;
parameter TEST="none";
logic clk;
logic reset_ext, reset;
parameter SIGNATURESIZE = 5000000;
int test, i, errors, totalerrors;
logic [31:0] sig32[0:SIGNATURESIZE];
logic [`XLEN-1:0] signature[0:SIGNATURESIZE];
logic [`XLEN-1:0] testadr, testadrNoBase;
string InstrFName, InstrDName, InstrEName, InstrMName, InstrWName;
logic [31:0] InstrW;
string tests[];
logic [3:0] dummy;
logic [`AHBW-1:0] HRDATAEXT;
logic HREADYEXT, HRESPEXT;
logic [`PA_BITS-1:0] HADDR;
logic [`AHBW-1:0] HWDATA;
logic [`XLEN/8-1:0] HWSTRB;
logic HWRITE;
logic [2:0] HSIZE;
logic [2:0] HBURST;
logic [3:0] HPROT;
logic [1:0] HTRANS;
logic HMASTLOCK;
logic HCLK, HRESETn;
logic [`XLEN-1:0] PCW;
string ProgramAddrMapFile, ProgramLabelMapFile;
integer ProgramAddrLabelArray [string] = '{ "begin_signature" : 0, "tohost" : 0 };
logic DCacheFlushDone, DCacheFlushStart;
logic riscofTest;
flopenr #(`XLEN) PCWReg(clk, reset, ~dut.core.ieu.dp.StallW, dut.core.ifu.PCM, PCW);
flopenr #(32) InstrWReg(clk, reset, ~dut.core.ieu.dp.StallW, dut.core.ifu.InstrM, InstrW);
// check assertions for a legal configuration
riscvassertions riscvassertions();
// pick tests based on modes supported
initial begin
$display("TEST is %s", TEST);
//tests = '{};
if (`XLEN == 64) begin // RV64
case (TEST)
"arch64i": tests = arch64i;
"arch64priv": tests = arch64priv;
"arch64c": if (`C_SUPPORTED)
if (`ZICSR_SUPPORTED) tests = {arch64c, arch64cpriv};
else tests = {arch64c};
"arch64m": if (`M_SUPPORTED) tests = arch64m;
"arch64f": if (`F_SUPPORTED) tests = arch64f;
"arch64d": if (`D_SUPPORTED) tests = arch64d;
"imperas64i": tests = imperas64i;
"imperas64f": if (`F_SUPPORTED) tests = imperas64f;
"imperas64d": if (`D_SUPPORTED) tests = imperas64d;
"imperas64m": if (`M_SUPPORTED) tests = imperas64m;
"wally64a": if (`A_SUPPORTED) tests = wally64a;
"imperas64c": if (`C_SUPPORTED) tests = imperas64c;
else tests = imperas64iNOc;
"custom": tests = custom;
"wally64i": tests = wally64i;
"wally64priv": tests = wally64priv;
"wally64periph": tests = wally64periph;
"coremark": tests = coremark;
"fpga": tests = fpga;
"ahb" : tests = ahb;
endcase
end else begin // RV32
case (TEST)
"arch32i": tests = arch32i;
"arch32priv": tests = arch32priv;
"arch32c": if (`C_SUPPORTED)
if (`ZICSR_SUPPORTED) tests = {arch32c, arch32cpriv};
else tests = {arch32c};
"arch32m": if (`M_SUPPORTED) tests = arch32m;
"arch32f": if (`F_SUPPORTED) tests = arch32f;
"arch32d": if (`D_SUPPORTED) tests = arch32d;
"imperas32i": tests = imperas32i;
"imperas32f": if (`F_SUPPORTED) tests = imperas32f;
"imperas32m": if (`M_SUPPORTED) tests = imperas32m;
"wally32a": if (`A_SUPPORTED) tests = wally32a;
"imperas32c": if (`C_SUPPORTED) tests = imperas32c;
else tests = imperas32iNOc;
"wally32i": tests = wally32i;
"wally32e": tests = wally32e;
"wally32priv": tests = wally32priv;
"wally32periph": tests = wally32periph;
"embench": tests = embench;
"coremark": tests = coremark;
endcase
end
if (tests.size() == 0) begin
$display("TEST %s not supported in this configuration", TEST);
$stop;
end
end
string signame, memfilename, pathname, objdumpfilename, adrstr, outputfile;
integer outputFilePointer;
logic [31:0] GPIOPinsIn, GPIOPinsOut, GPIOPinsEn;
logic UARTSin, UARTSout;
logic SDCCLK;
logic SDCCmdIn;
logic SDCCmdOut;
logic SDCCmdOE;
logic [3:0] SDCDatIn;
tri1 [3:0] SDCDat;
tri1 SDCCmd;
logic HREADY;
logic HSELEXT;
// instantiate device to be tested
assign GPIOPinsIn = 0;
assign UARTSin = 1;
if(`EXT_MEM_SUPPORTED) begin
ram_ahb #(.BASE(`EXT_MEM_BASE), .RANGE(`EXT_MEM_RANGE))
ram (.HCLK, .HRESETn, .HADDR, .HWRITE, .HTRANS, .HWDATA, .HSELRam(HSELEXT),
.HREADRam(HRDATAEXT), .HREADYRam(HREADYEXT), .HRESPRam(HRESPEXT), .HREADY,
.HWSTRB);
end else begin
assign HREADYEXT = 1;
assign HRESPEXT = 0;
assign HRDATAEXT = 0;
end
if(`FPGA) begin : sdcard
sdModel sdcard
(.sdClk(SDCCLK),
.cmd(SDCCmd),
.dat(SDCDat));
assign SDCCmd = SDCCmdOE ? SDCCmdOut : 1'bz;
assign SDCCmdIn = SDCCmd;
assign SDCDatIn = SDCDat;
end else begin
assign SDCCmd = '0;
assign SDCDat = '0;
end
wallypipelinedsoc dut(.clk, .reset_ext, .reset, .HRDATAEXT,.HREADYEXT, .HRESPEXT,.HSELEXT,
.HCLK, .HRESETn, .HADDR, .HWDATA, .HWSTRB, .HWRITE, .HSIZE, .HBURST, .HPROT,
.HTRANS, .HMASTLOCK, .HREADY, .TIMECLK(1'b0), .GPIOPinsIn, .GPIOPinsOut, .GPIOPinsEn,
.UARTSin, .UARTSout, .SDCCmdIn, .SDCCmdOut, .SDCCmdOE, .SDCDatIn, .SDCCLK);
// Track names of instructions
instrTrackerTB it(clk, reset, dut.core.ieu.dp.FlushE,
dut.core.ifu.FinalInstrRawF[31:0],
dut.core.ifu.InstrD, dut.core.ifu.InstrE,
dut.core.ifu.InstrM, InstrW,
InstrFName, InstrDName, InstrEName, InstrMName, InstrWName);
// initialize tests
localparam integer MemStartAddr = 0;
localparam integer MemEndAddr = `UNCORE_RAM_RANGE>>1+(`XLEN/32);
initial
begin
test = 1;
totalerrors = 0;
testadr = 0;
testadrNoBase = 0;
// riscof tests have a different signature, tests[0] == "1" refers to RiscvArchTests and tests[0] == "2" refers to WallyRiscvArchTests
riscofTest = tests[0] == "1" | tests[0] == "2";
// fill memory with defined values to reduce Xs in simulation
// Quick note the memory will need to be initialized. The C library does not
// guarantee the initialized reads. For example a strcmp can read 6 byte
// strings, but uses a load double to read them in. If the last 2 bytes are
// not initialized the compare results in an 'x' which propagates through
// the design.
if (TEST == "coremark")
for (i=MemStartAddr; i<MemEndAddr; i = i+1)
dut.uncore.uncore.ram.ram.memory.RAM[i] = 64'h0;
// read test vectors into memory
pathname = tvpaths[tests[0].atoi()];
/* if (tests[0] == `IMPERASTEST)
pathname = tvpaths[0];
else pathname = tvpaths[1]; */
if (riscofTest) memfilename = {pathname, tests[test], "/ref/ref.elf.memfile"};
else memfilename = {pathname, tests[test], ".elf.memfile"};
if (`FPGA) begin
string romfilename, sdcfilename;
romfilename = {"../../tests/custom/fpga-test-sdc/bin/fpga-test-sdc.memfile"};
sdcfilename = {"../testbench/sdc/ramdisk2.hex"};
$readmemh(romfilename, dut.uncore.uncore.bootrom.bootrom.memory.ROM);
$readmemh(sdcfilename, sdcard.sdcard.FLASHmem);
// force sdc timers
force dut.uncore.uncore.sdc.SDC.LimitTimers = 1;
end else begin
if (`IROM_SUPPORTED) $readmemh(memfilename, dut.core.ifu.irom.irom.rom.ROM);
else if (`BUS) $readmemh(memfilename, dut.uncore.uncore.ram.ram.memory.RAM);
if (`DTIM_SUPPORTED) $readmemh(memfilename, dut.core.lsu.dtim.dtim.ram.RAM);
end
if (riscofTest) begin
ProgramAddrMapFile = {pathname, tests[test], "/ref/ref.elf.objdump.addr"};
ProgramLabelMapFile = {pathname, tests[test], "/ref/ref.elf.objdump.lab"};
end else begin
ProgramAddrMapFile = {pathname, tests[test], ".elf.objdump.addr"};
ProgramLabelMapFile = {pathname, tests[test], ".elf.objdump.lab"};
end
// declare memory labels that interest us, the updateProgramAddrLabelArray task will find the addr of each label and fill the array
// to expand, add more elements to this array and initialize them to zero (also initilaize them to zero at the start of the next test)
if(!`FPGA) begin
updateProgramAddrLabelArray(ProgramAddrMapFile, ProgramLabelMapFile, ProgramAddrLabelArray);
$display("Read memfile %s", memfilename);
end
reset_ext = 1; # 42; reset_ext = 0;
end
// generate clock to sequence tests
always
begin
clk = 1; # 5; clk = 0; # 5;
// if ($time % 100000 == 0) $display("Time is %0t", $time);
end
logic [`XLEN-1:0] debugmemoryadr;
// assign debugmemoryadr = dut.uncore.uncore.ram.ram.memory.RAM[5140];
// check results
always @(negedge clk)
begin
if (TEST == "coremark")
if (dut.core.priv.priv.EcallFaultM) begin
$display("Benchmark: coremark is done.");
$stop;
end
// Termination condition (i.e. we finished running current test)
if (DCacheFlushDone) begin
integer begin_signature_addr;
begin_signature_addr = ProgramAddrLabelArray["begin_signature"];
if (!begin_signature_addr)
$display("begin_signature addr not found in %s", ProgramLabelMapFile);
testadr = ($unsigned(begin_signature_addr))/(`XLEN/8);
testadrNoBase = (begin_signature_addr - `UNCORE_RAM_BASE)/(`XLEN/8);
#600; // give time for instructions in pipeline to finish
if (TEST == "embench") begin
// Writes contents of begin_signature to .sim.output file
// this contains instret and cycles for start and end of test run, used by embench python speed script to calculate embench speed score
// also begin_signature contains the results of the self checking mechanism, which will be read by the python script for error checking
$display("Embench Benchmark: %s is done.", tests[test]);
if (riscofTest) outputfile = {pathname, tests[test], "/ref/ref.sim.output"};
else outputfile = {pathname, tests[test], ".sim.output"};
outputFilePointer = $fopen(outputfile);
i = 0;
while ($unsigned(i) < $unsigned(5'd5)) begin
$fdisplayh(outputFilePointer, DCacheFlushFSM.ShadowRAM[testadr+i]);
i = i + 1;
end
$fclose(outputFilePointer);
$display("Embench Benchmark: created output file: %s", outputfile);
end else begin
// for tests with no self checking mechanism, read .signature.output file and compare to check for errors
// clear signature to prevent contamination from previous tests
for(i=0; i<SIGNATURESIZE; i=i+1) begin
sig32[i] = 'bx;
end
if (riscofTest) signame = {pathname, tests[test], "/ref/Reference-sail_c_simulator.signature"};
else signame = {pathname, tests[test], ".signature.output"};
// read signature, reformat in 64 bits if necessary
$readmemh(signame, sig32);
i = 0;
while (i < SIGNATURESIZE) begin
if (`XLEN == 32) begin
signature[i] = sig32[i];
i = i+1;
end else begin
signature[i/2] = {sig32[i+1], sig32[i]};
i = i + 2;
end
if (i >= 4 & sig32[i-4] === 'bx) begin
if (i == 4) begin
i = SIGNATURESIZE+1; // flag empty file
$display(" Error: empty test file");
end else i = SIGNATURESIZE; // skip over the rest of the x's for efficiency
end
end
// Check errors
errors = (i == SIGNATURESIZE+1); // error if file is empty
i = 0;
/* verilator lint_off INFINITELOOP */
while (signature[i] !== 'bx) begin
logic [`XLEN-1:0] sig;
if (`DTIM_SUPPORTED) sig = dut.core.lsu.dtim.dtim.ram.RAM[testadrNoBase+i];
else if (`UNCORE_RAM_SUPPORTED) sig = dut.uncore.uncore.ram.ram.memory.RAM[testadrNoBase+i];
//$display("signature[%h] = %h sig = %h", i, signature[i], sig);
if (signature[i] !== sig & (signature[i] !== DCacheFlushFSM.ShadowRAM[testadr+i])) begin
errors = errors+1;
$display(" Error on test %s result %d: adr = %h sim (D$) %h sim (DTIM_SUPPORTED) = %h, signature = %h",
tests[test], i, (testadr+i)*(`XLEN/8), DCacheFlushFSM.ShadowRAM[testadr+i], sig, signature[i]);
$stop;//***debug
end
i = i + 1;
end
/* verilator lint_on INFINITELOOP */
if (errors == 0) begin
$display("%s succeeded. Brilliant!!!", tests[test]);
end
else begin
$display("%s failed with %d errors. :(", tests[test], errors);
totalerrors = totalerrors+1;
end
end
// move onto the next test, check to see if we're done
test = test + 1;
if (test == tests.size()) begin
if (totalerrors == 0) $display("SUCCESS! All tests ran without failures.");
else $display("FAIL: %d test programs had errors", totalerrors);
$stop;
end
else begin
// If there are still additional tests to run, read in information for the next test
//pathname = tvpaths[tests[0]];
if (riscofTest) memfilename = {pathname, tests[test], "/ref/ref.elf.memfile"};
else memfilename = {pathname, tests[test], ".elf.memfile"};
//$readmemh(memfilename, dut.uncore.uncore.ram.ram.memory.RAM);
if (`IROM_SUPPORTED) $readmemh(memfilename, dut.core.ifu.irom.irom.rom.ROM);
else if (`UNCORE_RAM_SUPPORTED) $readmemh(memfilename, dut.uncore.uncore.ram.ram.memory.RAM);
if (`DTIM_SUPPORTED) $readmemh(memfilename, dut.core.lsu.dtim.dtim.ram.RAM);
if (riscofTest) begin
ProgramAddrMapFile = {pathname, tests[test], "/ref/ref.elf.objdump.addr"};
ProgramLabelMapFile = {pathname, tests[test], "/ref/ref.elf.objdump.lab"};
end else begin
ProgramAddrMapFile = {pathname, tests[test], ".elf.objdump.addr"};
ProgramLabelMapFile = {pathname, tests[test], ".elf.objdump.lab"};
end
ProgramAddrLabelArray = '{ "begin_signature" : 0, "tohost" : 0 };
if(!`FPGA) begin
updateProgramAddrLabelArray(ProgramAddrMapFile, ProgramLabelMapFile, ProgramAddrLabelArray);
$display("Read memfile %s", memfilename);
end
reset_ext = 1; # 47; reset_ext = 0;
end
end
end // always @ (negedge clk)
// track the current function or global label
if (DEBUG == 1) begin : FunctionName
FunctionName FunctionName(.reset(reset),
.clk(clk),
.ProgramAddrMapFile(ProgramAddrMapFile),
.ProgramLabelMapFile(ProgramLabelMapFile));
end
// Termination condition
// terminate on a specific ECALL after li x3,1 for old Imperas tests, *** remove this when old imperas tests are removed
// or sw gp,-56(t0) for new Imperas tests
// or sd gp, -56(t0)
// or on a jump to self infinite loop (6f) for RISC-V Arch tests
logic ecf; // remove this once we don't rely on old Imperas tests with Ecalls
if (`ZICSR_SUPPORTED) assign ecf = dut.core.priv.priv.EcallFaultM;
else assign ecf = 0;
assign DCacheFlushStart = ecf &
(dut.core.ieu.dp.regf.rf[3] == 1 |
(dut.core.ieu.dp.regf.we3 &
dut.core.ieu.dp.regf.a3 == 3 &
dut.core.ieu.dp.regf.wd3 == 1)) |
((dut.core.ifu.InstrM == 32'h6f | dut.core.ifu.InstrM == 32'hfc32a423 | dut.core.ifu.InstrM == 32'hfc32a823) & dut.core.ieu.c.InstrValidM ) |
((dut.core.lsu.IEUAdrM == ProgramAddrLabelArray["tohost"]) & InstrMName == "SW" );
DCacheFlushFSM DCacheFlushFSM(.clk(clk),
.reset(reset),
.start(DCacheFlushStart),
.done(DCacheFlushDone));
// initialize the branch predictor
if (`BPRED_ENABLED == 1)
begin
genvar adrindex;
// Initializing all zeroes into the branch predictor memory.
for(adrindex = 0; adrindex < 1024; adrindex++) begin
initial begin
force dut.core.ifu.bpred.bpred.Predictor.DirPredictor.PHT.mem[adrindex] = 0;
force dut.core.ifu.bpred.bpred.TargetPredictor.memory.mem[adrindex] = 0;
#1;
release dut.core.ifu.bpred.bpred.Predictor.DirPredictor.PHT.mem[adrindex];
release dut.core.ifu.bpred.bpred.TargetPredictor.memory.mem[adrindex];
end
end
end
// check for hange up.
logic [`XLEN-1:0] OldPCW;
integer WatchDogTimerCount;
localparam WatchDogTimerThreshold = 1000000;
logic WatchDogTimeOut;
always_ff @(posedge clk) begin
OldPCW <= PCW;
if(OldPCW == PCW) WatchDogTimerCount = WatchDogTimerCount + 1'b1;
else WatchDogTimerCount = '0;
end
always_comb begin
WatchDogTimeOut = WatchDogTimerCount >= WatchDogTimerThreshold;
if(WatchDogTimeOut) begin
$display("FAILURE: Watch Dog Time Out triggered. PCW stuck at %x for more than %d cycles", PCW, WatchDogTimerCount);
$stop;
end
end
endmodule
module riscvassertions;
initial begin
assert (`PMP_ENTRIES == 0 | `PMP_ENTRIES==16 | `PMP_ENTRIES==64) else $error("Illegal number of PMP entries: PMP_ENTRIES must be 0, 16, or 64");
assert (`S_SUPPORTED | `VIRTMEM_SUPPORTED == 0) else $error("Virtual memory requires S mode support");
assert (`IDIV_BITSPERCYCLE == 1 | `IDIV_BITSPERCYCLE==2 | `IDIV_BITSPERCYCLE==4) else $error("Illegal number of divider bits/cycle: IDIV_BITSPERCYCLE must be 1, 2, or 4");
assert (`F_SUPPORTED | ~`D_SUPPORTED) else $error("Can't support double fp (D) without supporting float (F)");
assert (`D_SUPPORTED | ~`Q_SUPPORTED) else $error("Can't support quad fp (Q) without supporting double (D)");
assert (`F_SUPPORTED | ~`ZFH_SUPPORTED) else $error("Can't support half-precision fp (ZFH) without supporting float (F)");
assert (`DCACHE | ~`F_SUPPORTED | `FLEN <= `XLEN) else $error("Data cache required to support FLEN > XLEN because AHB bus width is XLEN");
assert (`I_SUPPORTED ^ `E_SUPPORTED) else $error("Exactly one of I and E must be supported");
assert (`FLEN<=`XLEN | `DCACHE | `DTIM_SUPPORTED) else $error("Wally does not support FLEN > XLEN unleses data cache or DTIM is supported");
assert (`DCACHE_WAYSIZEINBYTES <= 4096 | (!`DCACHE) | `VIRTMEM_SUPPORTED == 0) else $error("DCACHE_WAYSIZEINBYTES cannot exceed 4 KiB when caches and vitual memory is enabled (to prevent aliasing)");
assert (`DCACHE_LINELENINBITS >= 128 | (!`DCACHE)) else $error("DCACHE_LINELENINBITS must be at least 128 when caches are enabled");
assert (`DCACHE_LINELENINBITS < `DCACHE_WAYSIZEINBYTES*8) else $error("DCACHE_LINELENINBITS must be smaller than way size");
assert (`ICACHE_WAYSIZEINBYTES <= 4096 | (!`ICACHE) | `VIRTMEM_SUPPORTED == 0) else $error("ICACHE_WAYSIZEINBYTES cannot exceed 4 KiB when caches and vitual memory is enabled (to prevent aliasing)");
assert (`ICACHE_LINELENINBITS >= 32 | (!`ICACHE)) else $error("ICACHE_LINELENINBITS must be at least 32 when caches are enabled");
assert (`ICACHE_LINELENINBITS < `ICACHE_WAYSIZEINBYTES*8) else $error("ICACHE_LINELENINBITS must be smaller than way size");
assert (2**$clog2(`DCACHE_LINELENINBITS) == `DCACHE_LINELENINBITS | (!`DCACHE)) else $error("DCACHE_LINELENINBITS must be a power of 2");
assert (2**$clog2(`DCACHE_WAYSIZEINBYTES) == `DCACHE_WAYSIZEINBYTES | (!`DCACHE)) else $error("DCACHE_WAYSIZEINBYTES must be a power of 2");
assert (2**$clog2(`ICACHE_LINELENINBITS) == `ICACHE_LINELENINBITS | (!`ICACHE)) else $error("ICACHE_LINELENINBITS must be a power of 2");
assert (2**$clog2(`ICACHE_WAYSIZEINBYTES) == `ICACHE_WAYSIZEINBYTES | (!`ICACHE)) else $error("ICACHE_WAYSIZEINBYTES must be a power of 2");
assert (2**$clog2(`ITLB_ENTRIES) == `ITLB_ENTRIES | `VIRTMEM_SUPPORTED==0) else $error("ITLB_ENTRIES must be a power of 2");
assert (2**$clog2(`DTLB_ENTRIES) == `DTLB_ENTRIES | `VIRTMEM_SUPPORTED==0) else $error("DTLB_ENTRIES must be a power of 2");
assert (`UNCORE_RAM_RANGE >= 56'h07FFFFFF) else $warning("Some regression tests will fail if UNCORE_RAM_RANGE is less than 56'h07FFFFFF");
assert (`ZICSR_SUPPORTED == 1 | (`PMP_ENTRIES == 0 & `VIRTMEM_SUPPORTED == 0)) else $error("PMP_ENTRIES and VIRTMEM_SUPPORTED must be zero if ZICSR not supported.");
assert (`ZICSR_SUPPORTED == 1 | (`S_SUPPORTED == 0 & `U_SUPPORTED == 0)) else $error("S and U modes not supported if ZISR not supported");
assert (`U_SUPPORTED | (`S_SUPPORTED == 0)) else $error ("S mode only supported if U also is supported");
assert (`VIRTMEM_SUPPORTED == 0 | (`DTIM_SUPPORTED == 0 & `IROM_SUPPORTED == 0)) else $error("Can't simultaneously have virtual memory and DTIM_SUPPORTED/IROM_SUPPORTED because local memories don't translate addresses");
assert (`DCACHE | `VIRTMEM_SUPPORTED ==0) else $error("Virtual memory needs dcache");
assert (`ICACHE | `VIRTMEM_SUPPORTED ==0) else $error("Virtual memory needs icache");
assert ((`DCACHE == 0 & `ICACHE == 0) | `BUS) else $error("Dcache and Icache requires DBUS.");
assert (`DCACHE_LINELENINBITS <= `XLEN*16 | (!`DCACHE)) else $error("DCACHE_LINELENINBITS must not exceed 16 words because max AHB burst size is 1");
assert (`DCACHE_LINELENINBITS % 4 == 0) else $error("DCACHE_LINELENINBITS must hold 4, 8, or 16 words");
assert (`IDIV_ON_FPU == 0 | `F_SUPPORTED) else $error("IDIV on FPU needs F_SUPPORTED");
end
// *** DH 8/23/
endmodule
/* verilator lint_on STMTDLY */
/* verilator lint_on WIDTH */
module DCacheFlushFSM
(input logic clk,
input logic reset,
input logic start,
output logic done);
genvar adr;
logic [`XLEN-1:0] ShadowRAM[`UNCORE_RAM_BASE>>(1+`XLEN/32):(`UNCORE_RAM_RANGE+`UNCORE_RAM_BASE)>>1+(`XLEN/32)];
if(`DCACHE) begin
localparam integer numlines = testbench.dut.core.lsu.bus.dcache.dcache.NUMLINES;
localparam integer numways = testbench.dut.core.lsu.bus.dcache.dcache.NUMWAYS;
localparam integer linebytelen = testbench.dut.core.lsu.bus.dcache.dcache.LINEBYTELEN;
localparam integer linelen = testbench.dut.core.lsu.bus.dcache.dcache.LINELEN;
localparam integer sramlen = testbench.dut.core.lsu.bus.dcache.dcache.CacheWays[0].SRAMLEN;
localparam integer cachesramwords = testbench.dut.core.lsu.bus.dcache.dcache.CacheWays[0].NUMSRAM;
//testbench.dut.core.lsu.bus.dcache.dcache.CacheWays.NUMSRAM;
localparam integer numwords = sramlen/`XLEN;
localparam integer lognumlines = $clog2(numlines);
localparam integer loglinebytelen = $clog2(linebytelen);
localparam integer lognumways = $clog2(numways);
localparam integer tagstart = lognumlines + loglinebytelen;
genvar index, way, cacheWord;
logic [sramlen-1:0] CacheData [numways-1:0] [numlines-1:0] [cachesramwords-1:0];
logic [sramlen-1:0] cacheline;
logic [`XLEN-1:0] CacheTag [numways-1:0] [numlines-1:0] [cachesramwords-1:0];
logic CacheValid [numways-1:0] [numlines-1:0] [cachesramwords-1:0];
logic CacheDirty [numways-1:0] [numlines-1:0] [cachesramwords-1:0];
logic [`PA_BITS-1:0] CacheAdr [numways-1:0] [numlines-1:0] [cachesramwords-1:0];
for(index = 0; index < numlines; index++) begin
for(way = 0; way < numways; way++) begin
for(cacheWord = 0; cacheWord < cachesramwords; cacheWord++) begin
copyShadow #(.tagstart(tagstart),
.loglinebytelen(loglinebytelen), .sramlen(sramlen))
copyShadow(.clk,
.start,
.tag(testbench.dut.core.lsu.bus.dcache.dcache.CacheWays[way].CacheTagMem.RAM[index][`PA_BITS-1-tagstart:0]),
.valid(testbench.dut.core.lsu.bus.dcache.dcache.CacheWays[way].ValidBits[index]),
.dirty(testbench.dut.core.lsu.bus.dcache.dcache.CacheWays[way].DirtyBits[index]),
// these dirty bit selections would be needed if dirty is moved inside the tag array.
//.dirty(testbench.dut.core.lsu.bus.dcache.dcache.CacheWays[way].dirty.DirtyMem.RAM[index]),
//.dirty(testbench.dut.core.lsu.bus.dcache.dcache.CacheWays[way].CacheTagMem.RAM[index][`PA_BITS+tagstart]),
.data(testbench.dut.core.lsu.bus.dcache.dcache.CacheWays[way].word[cacheWord].CacheDataMem.RAM[index]),
.index(index),
.cacheWord(cacheWord),
.CacheData(CacheData[way][index][cacheWord]),
.CacheAdr(CacheAdr[way][index][cacheWord]),
.CacheTag(CacheTag[way][index][cacheWord]),
.CacheValid(CacheValid[way][index][cacheWord]),
.CacheDirty(CacheDirty[way][index][cacheWord]));
end
end
end
integer i, j, k, l;
always @(posedge clk) begin
if (start) begin #1
#1
for(i = 0; i < numlines; i++) begin
for(j = 0; j < numways; j++) begin
for(l = 0; l < cachesramwords; l++) begin
if (CacheValid[j][i][l] & CacheDirty[j][i][l]) begin
for(k = 0; k < numwords; k++) begin
//cacheline = CacheData[j][i][0];
// does not work with modelsim
// # ** Error: ../testbench/testbench.sv(483): Range must be bounded by constant expressions.
// see https://verificationacademy.com/forums/systemverilog/range-must-be-bounded-constant-expressions
//ShadowRAM[CacheAdr[j][i][k] >> $clog2(`XLEN/8)] = cacheline[`XLEN*(k+1)-1:`XLEN*k];
ShadowRAM[(CacheAdr[j][i][l] >> $clog2(`XLEN/8)) + k] = CacheData[j][i][l][`XLEN*k +: `XLEN];
end
end
end
end
end
end
end
end
flop #(1) doneReg(.clk, .d(start), .q(done));
endmodule
module copyShadow
#(parameter tagstart, loglinebytelen, sramlen)
(input logic clk,
input logic start,
input logic [`PA_BITS-1:tagstart] tag,
input logic valid, dirty,
input logic [sramlen-1:0] data,
input logic [32-1:0] index,
input logic [32-1:0] cacheWord,
output logic [sramlen-1:0] CacheData,
output logic [`PA_BITS-1:0] CacheAdr,
output logic [`XLEN-1:0] CacheTag,
output logic CacheValid,
output logic CacheDirty);
always_ff @(posedge clk) begin
if(start) begin
CacheTag = tag;
CacheValid = valid;
CacheDirty = dirty;
CacheData = data;
CacheAdr = (tag << tagstart) + (index << loglinebytelen) + (cacheWord << $clog2(sramlen/8));
end
end
endmodule
task automatic updateProgramAddrLabelArray;
input string ProgramAddrMapFile, ProgramLabelMapFile;
inout integer ProgramAddrLabelArray [string];
// Gets the memory location of begin_signature
integer ProgramLabelMapFP, ProgramAddrMapFP;
ProgramLabelMapFP = $fopen(ProgramLabelMapFile, "r");
ProgramAddrMapFP = $fopen(ProgramAddrMapFile, "r");
if (ProgramLabelMapFP & ProgramAddrMapFP) begin // check we found both files
while (!$feof(ProgramLabelMapFP)) begin
string label, adrstr;
integer returncode;
returncode = $fscanf(ProgramLabelMapFP, "%s\n", label);
returncode = $fscanf(ProgramAddrMapFP, "%s\n", adrstr);
if (ProgramAddrLabelArray.exists(label))
ProgramAddrLabelArray[label] = adrstr.atohex();
end
end
$fclose(ProgramLabelMapFP);
$fclose(ProgramAddrMapFP);
endtask
Reference in New Issue View Git Blame Copy Permalink