cvw/fpga/zsbl/spi.h
2024-07-22 16:57:04 -05:00

62 lines
2.3 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#pragma once
#ifndef SPI_HEADER
#define SPI_HEADER
#include <stdint.h>
#define SPI_BASE 0x13000 /* Base address of SPI device used for SDC */
/* register offsets */
#define SPI_SCKDIV SPI_BASE + 0x00 /* Serial clock divisor */
#define SPI_SCKMODE SPI_BASE + 0x04 /* Serial clock mode */
#define SPI_CSID SPI_BASE + 0x10 /* Chip select ID */
#define SPI_CSDEF SPI_BASE + 0x14 /* Chip select default */
#define SPI_CSMODE SPI_BASE + 0x18 /* Chip select mode */
#define SPI_DELAY0 SPI_BASE + 0x28 /* Delay control 0 */
#define SPI_DELAY1 SPI_BASE + 0x2c /* Delay control 1 */
#define SPI_FMT SPI_BASE + 0x40 /* Frame format */
#define SPI_TXDATA SPI_BASE + 0x48 /* Tx FIFO data */
#define SPI_RXDATA SPI_BASE + 0x4c /* Rx FIFO data */
#define SPI_TXMARK SPI_BASE + 0x50 /* Tx FIFO [<35;39;29Mwatermark */
#define SPI_RXMARK SPI_BASE + 0x54 /* Rx FIFO watermark */
/* Non-implemented
#define SPI_FCTRL SPI_BASE + 0x60 // SPI flash interface control
#define SPI_FFMT SPI_BASE + 0x64 // SPI flash instruction format
*/
#define SPI_IE SPI_BASE + 0x70 /* Interrupt Enable Register */
#define SPI_IP SPI_BASE + 0x74 /* Interrupt Pendings Register */
/* delay0 bits */
#define SIFIVE_SPI_DELAY0_CSSCK(x) ((u32)(x))
#define SIFIVE_SPI_DELAY0_CSSCK_MASK 0xffU
#define SIFIVE_SPI_DELAY0_SCKCS(x) ((u32)(x) << 16)
#define SIFIVE_SPI_DELAY0_SCKCS_MASK (0xffU << 16)
/* delay1 bits */
#define SIFIVE_SPI_DELAY1_INTERCS(x) ((u32)(x))
#define SIFIVE_SPI_DELAY1_INTERCS_MASK 0xffU
#define SIFIVE_SPI_DELAY1_INTERXFR(x) ((u32)(x) << 16)
#define SIFIVE_SPI_DELAY1_INTERXFR_MASK (0xffU << 16)
/* csmode bits */
#define SIFIVE_SPI_CSMODE_MODE_AUTO 0U
#define SIFIVE_SPI_CSMODE_MODE_HOLD 2U
#define SIFIVE_SPI_CSMODE_MODE_OFF 3U
#define WAITTX while(!(read_reg(SPI_IP) & 1) {}
#define WAITRX while(read_reg(SPI_IP) & 2) {}
inline void write_reg(uintptr_t addr, uint32_t value);
inline uint32_t read_reg(uintptr_t addr);
inline void spi_sendbyte(uint8_t byte);
inline void waittx();
inline void waitrx();
uint8_t spi_txrx(uint8_t byte);
inline uint8_t spi_readbyte();
void spi_init();
#endif