Github_Repos/cvw
1
0
Fork 1
mirror of https://github.com/openhwgroup/cvw synced 2025-02-11 06:05:49 +00:00
Code Issues Packages Projects Releases Wiki Activity
bdd5f5e611
cvw/testbench/testbench.sv
Limnanthes Serafini 6fddc591b5 Finished up testbench reformatting
2023-04-13 19:18:26 -07:00

818 lines
34 KiB
Systemverilog
Raw Blame History

///////////////////////////////////////////
// testbench.sv
//
// Written: David_Harris@hmc.edu 9 January 2021
// Modified:
//
// Purpose: Wally Testbench and helper modules
// Applies test programs from the riscv-arch-test and Imperas suites
//
// A component of the Wally configurable RISC-V project.
//
// Copyright (C) 2021 Harvey Mudd College & Oklahoma State University
//
// SPDX-License-Identifier: Apache-2.0 WITH SHL-2.1
//
// Licensed under the Solderpad Hardware License v 2.1 (the “License”); you may not use this file
// except in compliance with the License, or, at your option, the Apache License version 2.0. You
// may obtain a copy of the License at
//
// https://solderpad.org/licenses/SHL-2.1/
//
// Unless required by applicable law or agreed to in writing, any work distributed under the
// License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
// either express or implied. See the License for the specific language governing permissions
// and limitations under the License.
////////////////////////////////////////////////////////////////////////////////////////////////
`include "wally-config.vh"
`include "tests.vh"
`define PrintHPMCounters 0
`define BPRED_LOGGER 0
`define I_CACHE_ADDR_LOGGER 0
`define D_CACHE_ADDR_LOGGER 0
module testbench;
parameter DEBUG=0;
parameter TEST="none";
logic clk;
logic reset_ext, reset;
parameter SIGNATURESIZE = 5000000;
int test, i, errors, totalerrors;
logic [31:0] sig32[0:SIGNATURESIZE];
logic [`XLEN-1:0] signature[0:SIGNATURESIZE];
logic [`XLEN-1:0] testadr, testadrNoBase;
string InstrFName, InstrDName, InstrEName, InstrMName, InstrWName;
logic [31:0] InstrW;
string tests[];
logic [3:0] dummy;
logic [`AHBW-1:0] HRDATAEXT;
logic HREADYEXT, HRESPEXT;
logic [`PA_BITS-1:0] HADDR;
logic [`AHBW-1:0] HWDATA;
logic [`XLEN/8-1:0] HWSTRB;
logic HWRITE;
logic [2:0] HSIZE;
logic [2:0] HBURST;
logic [3:0] HPROT;
logic [1:0] HTRANS;
logic HMASTLOCK;
logic HCLK, HRESETn;
logic [`XLEN-1:0] PCW;
string ProgramAddrMapFile, ProgramLabelMapFile;
integer ProgramAddrLabelArray [string] = '{ "begin_signature" : 0, "tohost" : 0 };
logic DCacheFlushDone, DCacheFlushStart;
logic riscofTest;
logic StartSample, EndSample;
flopenr #(`XLEN) PCWReg(clk, reset, ~dut.core.ieu.dp.StallW, dut.core.ifu.PCM, PCW);
flopenr #(32) InstrWReg(clk, reset, ~dut.core.ieu.dp.StallW, dut.core.ifu.InstrM, InstrW);
// check assertions for a legal configuration
riscvassertions riscvassertions();
// pick tests based on modes supported
initial begin
$display("TEST is %s", TEST);
//tests = '{};
if (`XLEN == 64) begin // RV64
case (TEST)
"arch64i": tests = arch64i;
"arch64priv": tests = arch64priv;
"arch64c": if (`C_SUPPORTED)
if (`ZICSR_SUPPORTED) tests = {arch64c, arch64cpriv};
else tests = {arch64c};
"arch64m": if (`M_SUPPORTED) tests = arch64m;
"arch64f": if (`F_SUPPORTED) tests = arch64f;
"arch64d": if (`D_SUPPORTED) tests = arch64d;
"arch64zi": if (`ZIFENCEI_SUPPORTED) tests = arch64zi;
"imperas64i": tests = imperas64i;
"imperas64f": if (`F_SUPPORTED) tests = imperas64f;
"imperas64d": if (`D_SUPPORTED) tests = imperas64d;
"imperas64m": if (`M_SUPPORTED) tests = imperas64m;
"wally64a": if (`A_SUPPORTED) tests = wally64a;
"imperas64c": if (`C_SUPPORTED) tests = imperas64c;
else tests = imperas64iNOc;
"custom": tests = custom;
"wally64i": tests = wally64i;
"wally64priv": tests = wally64priv;
"wally64periph": tests = wally64periph;
"coremark": tests = coremark;
"fpga": tests = fpga;
"ahb" : tests = ahb;
"coverage64gc" : tests = coverage64gc;
"arch64zba": if (`ZBA_SUPPORTED) tests = arch64zba;
"arch64zbb": if (`ZBB_SUPPORTED) tests = arch64zbb;
"arch64zbc": if (`ZBC_SUPPORTED) tests = arch64zbc;
"arch64zbs": if (`ZBS_SUPPORTED) tests = arch64zbs;
endcase
end else begin // RV32
case (TEST)
"arch32i": tests = arch32i;
"arch32priv": tests = arch32priv;
"arch32c": if (`C_SUPPORTED)
if (`ZICSR_SUPPORTED) tests = {arch32c, arch32cpriv};
else tests = {arch32c};
"arch32m": if (`M_SUPPORTED) tests = arch32m;
"arch32f": if (`F_SUPPORTED) tests = arch32f;
"arch32d": if (`D_SUPPORTED) tests = arch32d;
"arch32zi": if (`ZIFENCEI_SUPPORTED) tests = arch32zi;
"imperas32i": tests = imperas32i;
"imperas32f": if (`F_SUPPORTED) tests = imperas32f;
"imperas32m": if (`M_SUPPORTED) tests = imperas32m;
"wally32a": if (`A_SUPPORTED) tests = wally32a;
"imperas32c": if (`C_SUPPORTED) tests = imperas32c;
else tests = imperas32iNOc;
"wally32i": tests = wally32i;
"wally32e": tests = wally32e;
"wally32priv": tests = wally32priv;
"wally32periph": tests = wally32periph;
"embench": tests = embench;
"coremark": tests = coremark;
"arch32zba": if (`ZBA_SUPPORTED) tests = arch32zba;
"arch32zbb": if (`ZBB_SUPPORTED) tests = arch32zbb;
"arch32zbc": if (`ZBC_SUPPORTED) tests = arch32zbc;
"arch32zbs": if (`ZBS_SUPPORTED) tests = arch32zbs;
endcase
end
if (tests.size() == 0) begin
$display("TEST %s not supported in this configuration", TEST);
$stop;
end
end
string signame, memfilename, pathname, objdumpfilename, adrstr, outputfile;
integer outputFilePointer;
logic [31:0] GPIOIN, GPIOOUT, GPIOEN;
logic UARTSin, UARTSout;
logic SDCCLK;
logic SDCCmdIn;
logic SDCCmdOut;
logic SDCCmdOE;
logic [3:0] SDCDatIn;
tri1 [3:0] SDCDat;
tri1 SDCCmd;
logic HREADY;
logic HSELEXT;
logic InitializingMemories;
integer ResetCount, ResetThreshold;
logic InReset;
logic BeginSample;
// instantiate device to be tested
assign GPIOIN = 0;
assign UARTSin = 1;
if(`EXT_MEM_SUPPORTED) begin
ram_ahb #(.BASE(`EXT_MEM_BASE), .RANGE(`EXT_MEM_RANGE))
ram (.HCLK, .HRESETn, .HADDR, .HWRITE, .HTRANS, .HWDATA, .HSELRam(HSELEXT),
.HREADRam(HRDATAEXT), .HREADYRam(HREADYEXT), .HRESPRam(HRESPEXT), .HREADY,
.HWSTRB);
end else begin
assign HREADYEXT = 1;
assign HRESPEXT = 0;
assign HRDATAEXT = 0;
end
if(`FPGA) begin : sdcard
sdModel sdcard
(.sdClk(SDCCLK),
.cmd(SDCCmd),
.dat(SDCDat));
assign SDCCmd = SDCCmdOE ? SDCCmdOut : 1'bz;
assign SDCCmdIn = SDCCmd;
assign SDCDatIn = SDCDat;
end else begin
assign SDCCmd = '0;
assign SDCDat = '0;
end
wallypipelinedsoc dut(.clk, .reset_ext, .reset, .HRDATAEXT,.HREADYEXT, .HRESPEXT,.HSELEXT,
.HCLK, .HRESETn, .HADDR, .HWDATA, .HWSTRB, .HWRITE, .HSIZE, .HBURST, .HPROT,
.HTRANS, .HMASTLOCK, .HREADY, .TIMECLK(1'b0), .GPIOIN, .GPIOOUT, .GPIOEN,
.UARTSin, .UARTSout, .SDCCmdIn, .SDCCmdOut, .SDCCmdOE, .SDCDatIn, .SDCCLK);
// Track names of instructions
instrTrackerTB it(clk, reset, dut.core.ieu.dp.FlushE,
dut.core.ifu.InstrRawF[31:0],
dut.core.ifu.InstrD, dut.core.ifu.InstrE,
dut.core.ifu.InstrM, InstrW,
InstrFName, InstrDName, InstrEName, InstrMName, InstrWName);
// initialize tests
localparam MemStartAddr = 0;
localparam MemEndAddr = `UNCORE_RAM_RANGE>>1+(`XLEN/32);
initial
begin
ResetCount = 0;
ResetThreshold = 2;
InReset = 1;
test = 1;
totalerrors = 0;
testadr = 0;
testadrNoBase = 0;
// riscof tests have a different signature, tests[0] == "1" refers to RiscvArchTests
// and tests[0] == "2" refers to WallyRiscvArchTests
riscofTest = tests[0] == "1" | tests[0] == "2";
// fill memory with defined values to reduce Xs in simulation
// Quick note the memory will need to be initialized. The C library does not
// guarantee the initialized reads. For example a strcmp can read 6 byte
// strings, but uses a load double to read them in. If the last 2 bytes are
// not initialized the compare results in an 'x' which propagates through
// the design.
if (TEST == "coremark")
for (i=MemStartAddr; i<MemEndAddr; i = i+1)
dut.uncore.uncore.ram.ram.memory.RAM[i] = 64'h0;
// read test vectors into memory
pathname = tvpaths[tests[0].atoi()];
/* if (tests[0] == `IMPERASTEST)
pathname = tvpaths[0];
else pathname = tvpaths[1]; */
if (riscofTest) memfilename = {pathname, tests[test], "/ref/ref.elf.memfile"};
else memfilename = {pathname, tests[test], ".elf.memfile"};
if (`FPGA) begin
string romfilename, sdcfilename;
romfilename = {"../tests/custom/fpga-test-sdc/bin/fpga-test-sdc.memfile"};
sdcfilename = {"../testbench/sdc/ramdisk2.hex"};
$readmemh(romfilename, dut.uncore.uncore.bootrom.bootrom.memory.ROM);
$readmemh(sdcfilename, sdcard.sdcard.FLASHmem);
// force sdc timers
force dut.uncore.uncore.sdc.SDC.LimitTimers = 1;
end else begin
if (`IROM_SUPPORTED) $readmemh(memfilename, dut.core.ifu.irom.irom.rom.ROM);
else if (`BUS_SUPPORTED) $readmemh(memfilename, dut.uncore.uncore.ram.ram.memory.RAM);
if (`DTIM_SUPPORTED) $readmemh(memfilename, dut.core.lsu.dtim.dtim.ram.RAM);
end
if (riscofTest) begin
ProgramAddrMapFile = {pathname, tests[test], "/ref/ref.elf.objdump.addr"};
ProgramLabelMapFile = {pathname, tests[test], "/ref/ref.elf.objdump.lab"};
end else begin
ProgramAddrMapFile = {pathname, tests[test], ".elf.objdump.addr"};
ProgramLabelMapFile = {pathname, tests[test], ".elf.objdump.lab"};
end
// declare memory labels that interest us, the updateProgramAddrLabelArray task will find
// the addr of each label and fill the array. To expand, add more elements to this array
// and initialize them to zero (also initilaize them to zero at the start of the next test)
if(!`FPGA) begin
updateProgramAddrLabelArray(ProgramAddrMapFile, ProgramLabelMapFile, ProgramAddrLabelArray);
$display("Read memfile %s", memfilename);
end
end
// generate clock to sequence tests
always
begin
clk = 1; # 5; clk = 0; # 5;
// if ($time % 100000 == 0) $display("Time is %0t", $time);
end
// check results
assign reset_ext = InReset;
always @(negedge clk)
begin
InitializingMemories = 0;
if(InReset == 1) begin
// once the test inidicates it's done we need to immediately hold reset for a number of cycles.
if(ResetCount < ResetThreshold) ResetCount = ResetCount + 1;
else begin // hit reset threshold so we remove reset.
InReset = 0;
ResetCount = 0;
end
end else begin
if (TEST == "coremark")
if (dut.core.priv.priv.EcallFaultM) begin
$display("Benchmark: coremark is done.");
$stop;
end
// Termination condition (i.e. we finished running current test)
if (DCacheFlushDone) begin
integer begin_signature_addr;
InReset = 1;
begin_signature_addr = ProgramAddrLabelArray["begin_signature"];
if (!begin_signature_addr)
$display("begin_signature addr not found in %s", ProgramLabelMapFile);
testadr = ($unsigned(begin_signature_addr))/(`XLEN/8);
testadrNoBase = (begin_signature_addr - `UNCORE_RAM_BASE)/(`XLEN/8);
#600; // give time for instructions in pipeline to finish
if (TEST == "embench") begin
// Writes contents of begin_signature to .sim.output file
// this contains instret and cycles for start and end of test run, used by embench
// python speed script to calculate embench speed score.
// also, begin_signature contains the results of the self checking mechanism,
// which will be read by the python script for error checking
$display("Embench Benchmark: %s is done.", tests[test]);
if (riscofTest) outputfile = {pathname, tests[test], "/ref/ref.sim.output"};
else outputfile = {pathname, tests[test], ".sim.output"};
outputFilePointer = $fopen(outputfile);
i = 0;
while ($unsigned(i) < $unsigned(5'd5)) begin
$fdisplayh(outputFilePointer, DCacheFlushFSM.ShadowRAM[testadr+i]);
i = i + 1;
end
$fclose(outputFilePointer);
$display("Embench Benchmark: created output file: %s", outputfile);
end else if (TEST == "coverage64gc") begin
$display("Coverage tests don't get checked");
end else begin
// for tests with no self checking mechanism, read .signature.output file and compare to check for errors
// clear signature to prevent contamination from previous tests
for(i=0; i<SIGNATURESIZE; i=i+1) begin
sig32[i] = 'bx;
end
if (riscofTest) signame = {pathname, tests[test], "/ref/Reference-sail_c_simulator.signature"};
else signame = {pathname, tests[test], ".signature.output"};
// read signature, reformat in 64 bits if necessary
$readmemh(signame, sig32);
i = 0;
while (i < SIGNATURESIZE) begin
if (`XLEN == 32) begin
signature[i] = sig32[i];
i = i+1;
end else begin
signature[i/2] = {sig32[i+1], sig32[i]};
i = i + 2;
end
if (i >= 4 & sig32[i-4] === 'bx) begin
if (i == 4) begin
i = SIGNATURESIZE+1; // flag empty file
$display(" Error: empty test file");
end else i = SIGNATURESIZE; // skip over the rest of the x's for efficiency
end
end
// Check errors
errors = (i == SIGNATURESIZE+1); // error if file is empty
i = 0;
/* verilator lint_off INFINITELOOP */
while (signature[i] !== 'bx) begin
logic [`XLEN-1:0] sig;
if (`DTIM_SUPPORTED) sig = dut.core.lsu.dtim.dtim.ram.RAM[testadrNoBase+i];
else if (`UNCORE_RAM_SUPPORTED) sig = dut.uncore.uncore.ram.ram.memory.RAM[testadrNoBase+i];
//$display("signature[%h] = %h sig = %h", i, signature[i], sig);
if (signature[i] !== sig & (signature[i] !== DCacheFlushFSM.ShadowRAM[testadr+i])) begin
errors = errors+1;
$display(" Error on test %s result %d: adr = %h sim (D$) %h sim (DTIM_SUPPORTED) = %h, signature = %h",
tests[test], i, (testadr+i)*(`XLEN/8), DCacheFlushFSM.ShadowRAM[testadr+i], sig, signature[i]);
$stop; //***debug
end
i = i + 1;
end
/* verilator lint_on INFINITELOOP */
if (errors == 0) begin
$display("%s succeeded. Brilliant!!!", tests[test]);
end else begin
$display("%s failed with %d errors. :(", tests[test], errors);
totalerrors = totalerrors+1;
end
end
// move onto the next test, check to see if we're done
test = test + 1;
if (test == tests.size()) begin
if (totalerrors == 0) $display("SUCCESS! All tests ran without failures.");
else $display("FAIL: %d test programs had errors", totalerrors);
$stop;
end else begin
InitializingMemories = 1;
// If there are still additional tests to run, read in information for the next test
//pathname = tvpaths[tests[0]];
if (riscofTest) memfilename = {pathname, tests[test], "/ref/ref.elf.memfile"};
else memfilename = {pathname, tests[test], ".elf.memfile"};
//$readmemh(memfilename, dut.uncore.uncore.ram.ram.memory.RAM);
if (`IROM_SUPPORTED) $readmemh(memfilename, dut.core.ifu.irom.irom.rom.ROM);
else if (`UNCORE_RAM_SUPPORTED) $readmemh(memfilename, dut.uncore.uncore.ram.ram.memory.RAM);
if (`DTIM_SUPPORTED) $readmemh(memfilename, dut.core.lsu.dtim.dtim.ram.RAM);
if (riscofTest) begin
ProgramAddrMapFile = {pathname, tests[test], "/ref/ref.elf.objdump.addr"};
ProgramLabelMapFile = {pathname, tests[test], "/ref/ref.elf.objdump.lab"};
end else begin
ProgramAddrMapFile = {pathname, tests[test], ".elf.objdump.addr"};
ProgramLabelMapFile = {pathname, tests[test], ".elf.objdump.lab"};
end
ProgramAddrLabelArray = '{ "begin_signature" : 0, "tohost" : 0 };
if(!`FPGA) begin
updateProgramAddrLabelArray(ProgramAddrMapFile, ProgramLabelMapFile, ProgramAddrLabelArray);
$display("Read memfile %s", memfilename);
end
end
end // if (DCacheFlushDone)
end
end // always @ (negedge clk)
if(`PrintHPMCounters & `ZICOUNTERS_SUPPORTED) begin : HPMCSample
integer HPMCindex;
logic StartSampleFirst;
logic StartSampleDelayed, BeginDelayed;
logic EndSampleFirst, EndSampleDelayed;
logic [`XLEN-1:0] InitialHPMCOUNTERH[`COUNTERS-1:0];
string HPMCnames[] = '{"Mcycle",
"------",
"InstRet",
"Br Count",
"Jump Not Return",
"Return",
"BP Wrong",
"BP Dir Wrong",
"BP Target Wrong",
"RAS Wrong",
"Instr Class Wrong",
"Load Stall",
"Store Stall",
"D Cache Access",
"D Cache Miss",
"D Cache Cycles",
"I Cache Access",
"I Cache Miss",
"I Cache Cycles",
"CSR Write",
"FenceI",
"SFenceVMA",
"Interrupt",
"Exception",
"Divide Cycles"
};
if(TEST == "embench") begin
// embench runs warmup then runs start_trigger
// embench end with stop_trigger.
assign StartSampleFirst = FunctionName.FunctionName.FunctionName == "start_trigger";
flopr #(1) StartSampleReg(clk, reset, StartSampleFirst, StartSampleDelayed);
assign StartSample = StartSampleFirst & ~ StartSampleDelayed;
assign EndSampleFirst = FunctionName.FunctionName.FunctionName == "stop_trigger";
flopr #(1) EndSampleReg(clk, reset, EndSampleFirst, EndSampleDelayed);
assign EndSample = EndSampleFirst & ~ EndSampleDelayed;
end else if(TEST == "coremark") begin
// embench runs warmup then runs start_trigger
// embench end with stop_trigger.
assign StartSampleFirst = FunctionName.FunctionName.FunctionName == "start_time";
flopr #(1) StartSampleReg(clk, reset, StartSampleFirst, StartSampleDelayed);
assign StartSample = StartSampleFirst & ~ StartSampleDelayed;
assign EndSampleFirst = FunctionName.FunctionName.FunctionName == "stop_time";
flopr #(1) EndSampleReg(clk, reset, EndSampleFirst, EndSampleDelayed);
assign EndSample = EndSampleFirst & ~ EndSampleDelayed;
end else begin
// default start condiction is reset
// default end condiction is end of test (DCacheFlushDone)
assign StartSampleFirst = InReset;
flopr #(1) StartSampleReg(clk, reset, StartSampleFirst, StartSampleDelayed);
assign StartSample = StartSampleFirst & ~ StartSampleDelayed;
assign EndSample = DCacheFlushStart & ~DCacheFlushDone;
flop #(1) BeginReg(clk, StartSampleFirst, BeginDelayed);
assign BeginSample = StartSampleFirst & ~BeginDelayed;
end
always @(negedge clk) begin
if(StartSample) begin
for(HPMCindex = 0; HPMCindex < 32; HPMCindex += 1) begin
InitialHPMCOUNTERH[HPMCindex] <= dut.core.priv.priv.csr.counters.counters.HPMCOUNTER_REGW[HPMCindex];
end
end
if(EndSample) begin
for(HPMCindex = 0; HPMCindex < HPMCnames.size(); HPMCindex += 1) begin
// unlikely to have more than 10M in any counter.
$display("Cnt[%2d] = %7d %s", HPMCindex, dut.core.priv.priv.csr.counters.counters.HPMCOUNTER_REGW[HPMCindex] - InitialHPMCOUNTERH[HPMCindex], HPMCnames[HPMCindex]);
end
end
end
end
// track the current function or global label
if (DEBUG == 1 | (`PrintHPMCounters & `ZICOUNTERS_SUPPORTED)) begin : FunctionName
FunctionName FunctionName(.reset(reset),
.clk(clk),
.ProgramAddrMapFile(ProgramAddrMapFile),
.ProgramLabelMapFile(ProgramLabelMapFile));
end
// Termination condition
// terminate on a specific ECALL after li x3,1 for old Imperas tests, *** remove this when old imperas tests are removed
// or sw gp,-56(t0) for new Imperas tests
// or sd gp, -56(t0)
// or on a jump to self infinite loop (6f) for RISC-V Arch tests
logic ecf; // remove this once we don't rely on old Imperas tests with Ecalls
if (`ZICSR_SUPPORTED) assign ecf = dut.core.priv.priv.EcallFaultM;
else assign ecf = 0;
assign DCacheFlushStart = ecf &
(dut.core.ieu.dp.regf.rf[3] == 1 |
(dut.core.ieu.dp.regf.we3 &
dut.core.ieu.dp.regf.a3 == 3 &
dut.core.ieu.dp.regf.wd3 == 1)) |
((dut.core.ifu.InstrM == 32'h6f | dut.core.ifu.InstrM == 32'hfc32a423 | dut.core.ifu.InstrM == 32'hfc32a823) & dut.core.ieu.c.InstrValidM ) |
((dut.core.lsu.IEUAdrM == ProgramAddrLabelArray["tohost"]) & InstrMName == "SW" );
DCacheFlushFSM DCacheFlushFSM(.clk(clk),
.reset(reset),
.start(DCacheFlushStart),
.done(DCacheFlushDone));
// initialize the branch predictor
if (`BPRED_SUPPORTED) begin
integer adrindex;
always @(*) begin
if(reset) begin
for(adrindex = 0; adrindex < 2**`BTB_SIZE; adrindex++) begin
force dut.core.ifu.bpred.bpred.TargetPredictor.memory.mem[adrindex] = 0;
end
for(adrindex = 0; adrindex < 2**`BPRED_SIZE; adrindex++) begin
force dut.core.ifu.bpred.bpred.Predictor.DirPredictor.PHT.mem[adrindex] = 0;
end
#1;
for(adrindex = 0; adrindex < 2**`BTB_SIZE; adrindex++) begin
release dut.core.ifu.bpred.bpred.TargetPredictor.memory.mem[adrindex];
end
for(adrindex = 0; adrindex < 2**`BPRED_SIZE; adrindex++) begin
release dut.core.ifu.bpred.bpred.Predictor.DirPredictor.PHT.mem[adrindex];
end
end
end
end
if (`ICACHE_SUPPORTED && `I_CACHE_ADDR_LOGGER) begin : ICacheLogger
int file;
string LogFile;
logic resetD, resetEdge;
logic Enable;
logic InvalDelayed, InvalEdge;
assign Enable = dut.core.ifu.bus.icache.icache.cachefsm.LRUWriteEn &
dut.core.ifu.immu.immu.pmachecker.Cacheable &
~dut.core.ifu.bus.icache.icache.cachefsm.FlushStage &
~reset;
flop #(1) ResetDReg(clk, reset, resetD);
assign resetEdge = ~reset & resetD;
flop #(1) InvalReg(clk, dut.core.ifu.InvalidateICacheM, InvalDelayed);
assign InvalEdge = dut.core.ifu.InvalidateICacheM & ~InvalDelayed;
initial begin
LogFile = $psprintf("ICache.log");
file = $fopen(LogFile, "w");
$fwrite(file, "BEGIN %s\n", memfilename);
end
string AccessTypeString, HitMissString;
assign HitMissString = dut.core.ifu.bus.icache.icache.CacheHit ? "H" :
dut.core.ifu.bus.icache.icache.vict.cacheLRU.AllValid ? "E" : "M";
always @(posedge clk) begin
if(resetEdge) $fwrite(file, "TRAIN\n");
if(BeginSample) $fwrite(file, "BEGIN %s\n", memfilename);
if(Enable) begin // only log i cache reads
$fwrite(file, "%h R %s\n", dut.core.ifu.PCPF, HitMissString);
end
if(InvalEdge) $fwrite(file, "0 I X\n");
if(EndSample) $fwrite(file, "END %s\n", memfilename);
end
end
if (`DCACHE_SUPPORTED && `D_CACHE_ADDR_LOGGER) begin : DCacheLogger
int file;
string LogFile;
logic resetD, resetEdge;
logic Enabled;
string AccessTypeString, HitMissString;
flop #(1) ResetDReg(clk, reset, resetD);
assign resetEdge = ~reset & resetD;
assign HitMissString = dut.core.lsu.bus.dcache.dcache.CacheHit ? "H" :
(!dut.core.lsu.bus.dcache.dcache.vict.cacheLRU.AllValid) ? "M" :
dut.core.lsu.bus.dcache.dcache.LineDirty ? "D" : "E";
assign AccessTypeString = dut.core.lsu.bus.dcache.FlushDCache ? "F" :
dut.core.lsu.bus.dcache.CacheAtomicM[1] ? "A" :
dut.core.lsu.bus.dcache.CacheRWM == 2'b10 ? "R" :
dut.core.lsu.bus.dcache.CacheRWM == 2'b01 ? "W" :
"NULL";
assign Enabled = dut.core.lsu.bus.dcache.dcache.cachefsm.LRUWriteEn &
~dut.core.lsu.bus.dcache.dcache.cachefsm.FlushStage &
dut.core.lsu.dmmu.dmmu.pmachecker.Cacheable &
(AccessTypeString != "NULL");
initial begin
LogFile = $psprintf("DCache.log");
file = $fopen(LogFile, "w");
$fwrite(file, "BEGIN %s\n", memfilename);
end
always @(posedge clk) begin
if(resetEdge) $fwrite(file, "TRAIN\n");
if(BeginSample) $fwrite(file, "BEGIN %s\n", memfilename);
if(Enabled) begin
$fwrite(file, "%h %s %s\n", dut.core.lsu.PAdrM, AccessTypeString, HitMissString);
end
if(dut.core.lsu.bus.dcache.dcache.cachefsm.FlushFlag) $fwrite(file, "0 F X\n");
if(EndSample) $fwrite(file, "END %s\n", memfilename);
end
end
if (`BPRED_SUPPORTED) begin : BranchLogger
if (`BPRED_LOGGER) begin
string direction;
int file;
logic PCSrcM;
string LogFile;
logic resetD, resetEdge;
flopenrc #(1) PCSrcMReg(clk, reset, dut.core.FlushM, ~dut.core.StallM, dut.core.ifu.bpred.bpred.Predictor.DirPredictor.PCSrcE, PCSrcM);
flop #(1) ResetDReg(clk, reset, resetD);
assign resetEdge = ~reset & resetD;
initial begin
LogFile = $psprintf("branch_%s%0d.log", `BPRED_TYPE, `BPRED_SIZE);
file = $fopen(LogFile, "w");
end
always @(posedge clk) begin
if(resetEdge) $fwrite(file, "TRAIN\n");
if(StartSample) $fwrite(file, "BEGIN %s\n", memfilename);
if(dut.core.ifu.InstrClassM[0] & ~dut.core.StallW & ~dut.core.FlushW & dut.core.InstrValidM) begin
direction = PCSrcM ? "t" : "n";
$fwrite(file, "%h %s\n", dut.core.PCM, direction);
end
if(EndSample) $fwrite(file, "END %s\n", memfilename);
end
end
end
// check for hang up.
logic [`XLEN-1:0] OldPCW;
integer WatchDogTimerCount;
localparam WatchDogTimerThreshold = 1000000;
logic WatchDogTimeOut;
always_ff @(posedge clk) begin
OldPCW <= PCW;
if(OldPCW == PCW) WatchDogTimerCount = WatchDogTimerCount + 1'b1;
else WatchDogTimerCount = '0;
end
always_comb begin
WatchDogTimeOut = WatchDogTimerCount >= WatchDogTimerThreshold;
if(WatchDogTimeOut) begin
$display("FAILURE: Watch Dog Time Out triggered. PCW stuck at %x for more than %d cycles", PCW, WatchDogTimerCount);
$stop;
end
end
endmodule
/* verilator lint_on STMTDLY */
/* verilator lint_on WIDTH */
module DCacheFlushFSM
(input logic clk,
input logic reset,
input logic start,
output logic done);
genvar adr;
logic [`XLEN-1:0] ShadowRAM[`UNCORE_RAM_BASE>>(1+`XLEN/32):(`UNCORE_RAM_RANGE+`UNCORE_RAM_BASE)>>1+(`XLEN/32)];
if(`DCACHE_SUPPORTED) begin
localparam numlines = testbench.dut.core.lsu.bus.dcache.dcache.NUMLINES;
localparam numways = testbench.dut.core.lsu.bus.dcache.dcache.NUMWAYS;
localparam linebytelen = testbench.dut.core.lsu.bus.dcache.dcache.LINEBYTELEN;
localparam linelen = testbench.dut.core.lsu.bus.dcache.dcache.LINELEN;
localparam sramlen = testbench.dut.core.lsu.bus.dcache.dcache.CacheWays[0].SRAMLEN;
localparam cachesramwords = testbench.dut.core.lsu.bus.dcache.dcache.CacheWays[0].NUMSRAM;
localparam numwords = sramlen/`XLEN;
localparam lognumlines = $clog2(numlines);
localparam loglinebytelen = $clog2(linebytelen);
localparam lognumways = $clog2(numways);
localparam tagstart = lognumlines + loglinebytelen;
genvar index, way, cacheWord;
logic [sramlen-1:0] CacheData [numways-1:0] [numlines-1:0] [cachesramwords-1:0];
logic [sramlen-1:0] cacheline;
logic [`XLEN-1:0] CacheTag [numways-1:0] [numlines-1:0] [cachesramwords-1:0];
logic CacheValid [numways-1:0] [numlines-1:0] [cachesramwords-1:0];
logic CacheDirty [numways-1:0] [numlines-1:0] [cachesramwords-1:0];
logic [`PA_BITS-1:0] CacheAdr [numways-1:0] [numlines-1:0] [cachesramwords-1:0];
for(index = 0; index < numlines; index++) begin
for(way = 0; way < numways; way++) begin
for(cacheWord = 0; cacheWord < cachesramwords; cacheWord++) begin
copyShadow #(.tagstart(tagstart),
.loglinebytelen(loglinebytelen), .sramlen(sramlen))
copyShadow(.clk,
.start,
.tag(testbench.dut.core.lsu.bus.dcache.dcache.CacheWays[way].CacheTagMem.RAM[index][`PA_BITS-1-tagstart:0]),
.valid(testbench.dut.core.lsu.bus.dcache.dcache.CacheWays[way].ValidBits[index]),
.dirty(testbench.dut.core.lsu.bus.dcache.dcache.CacheWays[way].DirtyBits[index]),
// these dirty bit selections would be needed if dirty is moved inside the tag array.
//.dirty(testbench.dut.core.lsu.bus.dcache.dcache.CacheWays[way].dirty.DirtyMem.RAM[index]),
//.dirty(testbench.dut.core.lsu.bus.dcache.dcache.CacheWays[way].CacheTagMem.RAM[index][`PA_BITS+tagstart]),
.data(testbench.dut.core.lsu.bus.dcache.dcache.CacheWays[way].word[cacheWord].wordram.CacheDataMem.RAM[index]),
.index(index),
.cacheWord(cacheWord),
.CacheData(CacheData[way][index][cacheWord]),
.CacheAdr(CacheAdr[way][index][cacheWord]),
.CacheTag(CacheTag[way][index][cacheWord]),
.CacheValid(CacheValid[way][index][cacheWord]),
.CacheDirty(CacheDirty[way][index][cacheWord]));
end
end
end
integer i, j, k, l;
always @(posedge clk) begin
if (start) begin #1
#1
for(i = 0; i < numlines; i++) begin
for(j = 0; j < numways; j++) begin
for(l = 0; l < cachesramwords; l++) begin
if (CacheValid[j][i][l] & CacheDirty[j][i][l]) begin
for(k = 0; k < numwords; k++) begin
//cacheline = CacheData[j][i][0];
// does not work with modelsim
// # ** Error: ../testbench/testbench.sv(483): Range must be bounded by constant expressions.
// see https://verificationacademy.com/forums/systemverilog/range-must-be-bounded-constant-expressions
//ShadowRAM[CacheAdr[j][i][k] >> $clog2(`XLEN/8)] = cacheline[`XLEN*(k+1)-1:`XLEN*k];
ShadowRAM[(CacheAdr[j][i][l] >> $clog2(`XLEN/8)) + k] = CacheData[j][i][l][`XLEN*k +: `XLEN];
end
end
end
end
end
end
end
end
flop #(1) doneReg(.clk, .d(start), .q(done));
endmodule
module copyShadow
#(parameter tagstart, loglinebytelen, sramlen)
(input logic clk,
input logic start,
input logic [`PA_BITS-1:tagstart] tag,
input logic valid, dirty,
input logic [sramlen-1:0] data,
input logic [32-1:0] index,
input logic [32-1:0] cacheWord,
output logic [sramlen-1:0] CacheData,
output logic [`PA_BITS-1:0] CacheAdr,
output logic [`XLEN-1:0] CacheTag,
output logic CacheValid,
output logic CacheDirty);
always_ff @(posedge clk) begin
if(start) begin
CacheTag = tag;
CacheValid = valid;
CacheDirty = dirty;
CacheData = data;
CacheAdr = (tag << tagstart) + (index << loglinebytelen) + (cacheWord << $clog2(sramlen/8));
end
end
endmodule
task automatic updateProgramAddrLabelArray;
input string ProgramAddrMapFile, ProgramLabelMapFile;
inout integer ProgramAddrLabelArray [string];
// Gets the memory location of begin_signature
integer ProgramLabelMapFP, ProgramAddrMapFP;
ProgramLabelMapFP = $fopen(ProgramLabelMapFile, "r");
ProgramAddrMapFP = $fopen(ProgramAddrMapFile, "r");
if (ProgramLabelMapFP & ProgramAddrMapFP) begin // check we found both files
while (!$feof(ProgramLabelMapFP)) begin
string label, adrstr;
integer returncode;
returncode = $fscanf(ProgramLabelMapFP, "%s\n", label);
returncode = $fscanf(ProgramAddrMapFP, "%s\n", adrstr);
if (ProgramAddrLabelArray.exists(label)) ProgramAddrLabelArray[label] = adrstr.atohex();
end
end
$fclose(ProgramLabelMapFP);
$fclose(ProgramAddrMapFP);
endtask
Reference in New Issue View Git Blame Copy Permalink