mirror of
https://github.com/openhwgroup/cvw
synced 2025-01-24 13:34:28 +00:00
400 lines
12 KiB
Systemverilog
400 lines
12 KiB
Systemverilog
///////////////////////////////////////////
|
|
// riscvsingle.sv
|
|
//
|
|
// Written: David_Harris@hmc.edu 9 January 2021
|
|
// Modified:
|
|
//
|
|
// Purpose: Simplified Single Cycle RISC-V Processor
|
|
// Adapted from DDCA RISC-V Edition
|
|
// Modified to match partitioning in RISC-V SoC Design
|
|
//
|
|
// A component of the Wally configurable RISC-V project.
|
|
//
|
|
// Copyright (C) 2021 Harvey Mudd College & Oklahoma State University
|
|
//
|
|
// MIT LICENSE
|
|
// Permission is hereby granted, free of charge, to any person obtaining a copy of this
|
|
// software and associated documentation files (the "Software"), to deal in the Software
|
|
// without restriction, including without limitation the rights to use, copy, modify, merge,
|
|
// publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons
|
|
// to whom the Software is furnished to do so, subject to the following conditions:
|
|
//
|
|
// The above copyright notice and this permission notice shall be included in all copies or
|
|
// substantial portions of the Software.
|
|
//
|
|
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
|
|
// INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
|
|
// PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
|
|
// BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
|
|
// TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
|
|
// OR OTHER DEALINGS IN THE SOFTWARE.
|
|
////////////////////////////////////////////////////////////////////////////////////////////////
|
|
|
|
|
|
// run 210
|
|
// Expect simulator to print "Simulation succeeded"
|
|
// when the value 25 (0x19) is written to address 100 (0x64)
|
|
|
|
// Single-cycle implementation of RISC-V (RV32I)
|
|
// User-level Instruction Set Architecture V2.2
|
|
// Implements a subset of the base integer instructions:
|
|
// lw, sw
|
|
// add, sub, and, or, slt
|
|
// addi, andi, ori, slti
|
|
// beq
|
|
// jal
|
|
// Exceptions, traps, and interrupts not implemented
|
|
// little-endian memory
|
|
|
|
// 31 32-bit registers x1-x31, x0 hardwired to 0
|
|
// R-Type instructions
|
|
// add, sub, and, or, slt
|
|
// INSTR rd, rs1, rs2
|
|
// Instr[31:25] = funct7 (funct7b5 & opb5 = 1 for sub, 0 for others)
|
|
// Instr[24:20] = rs2
|
|
// Instr[19:15] = rs1
|
|
// Instr[14:12] = funct3
|
|
// Instr[11:7] = rd
|
|
// Instr[6:0] = opcode
|
|
// I-Type Instructions
|
|
// lw, I-type ALU (addi, andi, ori, slti)
|
|
// lw: INSTR rd, imm(rs1)
|
|
// I-type ALU: INSTR rd, rs1, imm (12-bit signed)
|
|
// Instr[31:20] = imm[11:0]
|
|
// Instr[24:20] = rs2
|
|
// Instr[19:15] = rs1
|
|
// Instr[14:12] = funct3
|
|
// Instr[11:7] = rd
|
|
// Instr[6:0] = opcode
|
|
// S-Type Instruction
|
|
// sw rs2, imm(rs1) (store rs2 into address specified by rs1 + immm)
|
|
// Instr[31:25] = imm[11:5] (offset[11:5])
|
|
// Instr[24:20] = rs2 (src)
|
|
// Instr[19:15] = rs1 (base)
|
|
// Instr[14:12] = funct3
|
|
// Instr[11:7] = imm[4:0] (offset[4:0])
|
|
// Instr[6:0] = opcode
|
|
// B-Type Instruction
|
|
// beq rs1, rs2, imm (PCTarget = PC + (signed imm x 2))
|
|
// Instr[31:25] = imm[12], imm[10:5]
|
|
// Instr[24:20] = rs2
|
|
// Instr[19:15] = rs1
|
|
// Instr[14:12] = funct3
|
|
// Instr[11:7] = imm[4:1], imm[11]
|
|
// Instr[6:0] = opcode
|
|
// J-Type Instruction
|
|
// jal rd, imm (signed imm is multiplied by 2 and added to PC, rd = PC+4)
|
|
// Instr[31:12] = imm[20], imm[10:1], imm[11], imm[19:12]
|
|
// Instr[11:7] = rd
|
|
// Instr[6:0] = opcode
|
|
|
|
// Instruction opcode funct3 funct7
|
|
// add 0110011 000 0000000
|
|
// sub 0110011 000 0100000
|
|
// and 0110011 111 0000000
|
|
// or 0110011 110 0000000
|
|
// slt 0110011 010 0000000
|
|
// addi 0010011 000 immediate
|
|
// andi 0010011 111 immediate
|
|
// ori 0010011 110 immediate
|
|
// slti 0010011 010 immediate
|
|
// beq 1100011 000 immediate
|
|
// lw 0000011 010 immediate
|
|
// sw 0100011 010 immediate
|
|
// jal 1101111 immediate immediate
|
|
|
|
|
|
/* verilator lint_on UNUSED */
|
|
|
|
/* verilator lint_off COMBDLY */
|
|
/* verilator lint_off INITIALDLY */
|
|
/* verilator lint_off STMTDLY */
|
|
|
|
module testbench();
|
|
logic clk;
|
|
logic reset;
|
|
logic [31:0] WriteData, IEUAdr;
|
|
logic MemWrite;
|
|
|
|
// instantiate device to be tested
|
|
riscvsinglecore dut(clk, reset, WriteData, IEUAdr, MemWrite);
|
|
|
|
// initialize test
|
|
initial begin
|
|
reset <= 1; # 22; reset <= 0;
|
|
end
|
|
|
|
// generate clock to sequence tests
|
|
always begin
|
|
clk <= 1; # 5; clk <= 0; # 5;
|
|
end
|
|
|
|
// check results
|
|
always @(negedge clk) begin
|
|
if(MemWrite) begin
|
|
if(IEUAdr === 100 & WriteData === 25) begin
|
|
$display("Simulation succeeded");
|
|
$stop;
|
|
end else if (IEUAdr !== 96) begin
|
|
$display("Simulation failed");
|
|
$stop;
|
|
end
|
|
end
|
|
end
|
|
endmodule
|
|
|
|
module riscvsinglecore(
|
|
input logic clk, reset,
|
|
output logic [31:0] WriteData, IEUAdr,
|
|
output logic MemWrite);
|
|
|
|
logic [31:0] PC, PCPlus4, Instr, ReadData;
|
|
logic PCSrc;
|
|
|
|
ifu ifu(.clk, .reset, .PCSrc, .IEUAdr, .Instr, .PC, .PCPlus4);
|
|
ieu ieu(.clk, .reset, .Instr, .PC, .PCPlus4, .PCSrc, .MemWrite, .IEUAdr, .WriteData, .ReadData);
|
|
lsu lsu(.clk, .MemWrite, .IEUAdr, .WriteData, .ReadData);
|
|
endmodule
|
|
|
|
module ifu(
|
|
input logic clk, reset,
|
|
input logic PCSrc,
|
|
input logic [31:0] IEUAdr,
|
|
output logic [31:0] Instr, PC, PCPlus4);
|
|
|
|
logic [31:0] PCNext;
|
|
|
|
// next PC logic
|
|
flopr #(32) pcreg(clk, reset, PCNext, PC);
|
|
adder pcadd4(PC, 32'd4, PCPlus4);
|
|
mux2 #(32) pcmux(PCPlus4, IEUAdr, PCSrc, PCNext);
|
|
irom irom(PC, Instr);
|
|
endmodule
|
|
|
|
module irom(input logic [31:0] a,
|
|
output logic [31:0] rd);
|
|
|
|
logic [31:0] RAM[63:0];
|
|
|
|
initial
|
|
$readmemh("riscvtest.memfile",RAM);
|
|
|
|
assign rd = RAM[a[7:2]]; // word aligned
|
|
endmodule
|
|
|
|
module ieu(
|
|
input logic clk, reset,
|
|
input logic [31:0] Instr,
|
|
input logic [31:0] PC, PCPlus4,
|
|
output logic PCSrc, MemWrite,
|
|
output logic [31:0] IEUAdr, WriteData,
|
|
input logic [31:0] ReadData);
|
|
|
|
logic RegWrite, Jump, Eq, ALUResultSrc, ResultSrc;
|
|
logic [1:0] ALUSrc, ImmSrc;
|
|
logic [1:0] ALUControl;
|
|
|
|
controller c(.Op(Instr[6:0]), .Funct3(Instr[14:12]), .Funct7b5(Instr[30]), .Eq,
|
|
.ALUResultSrc, .ResultSrc, .MemWrite, .PCSrc,
|
|
.ALUSrc, .RegWrite, .ImmSrc, .ALUControl);
|
|
datapath dp(.clk, .reset, .Funct3(Instr[14:12]),
|
|
.ALUResultSrc, .ResultSrc, .ALUSrc, .RegWrite, .ImmSrc, .ALUControl, .Eq,
|
|
.PC, .PCPlus4, .Instr, .IEUAdr, .WriteData, .ReadData);
|
|
endmodule
|
|
|
|
module controller(
|
|
input logic [6:0] Op,
|
|
input logic Eq,
|
|
input logic [2:0] Funct3,
|
|
input logic Funct7b5,
|
|
output logic ALUResultSrc,
|
|
output logic ResultSrc,
|
|
output logic MemWrite,
|
|
output logic PCSrc,
|
|
output logic RegWrite,
|
|
output logic [1:0] ALUSrc, ImmSrc,
|
|
output logic [1:0] ALUControl);
|
|
|
|
logic Branch, Jump;
|
|
logic Sub, ALUOp;
|
|
|
|
logic [10:0] controls;
|
|
|
|
// Main decoder
|
|
always_comb
|
|
case(Op)
|
|
// RegWrite_ImmSrc_ALUSrc_ALUOp_ALUResultSrc_MemWrite_ResultSrc_Branch_Jump
|
|
7'b0000011: controls = 11'b1_00_01_0_0_0_1_0_0; // lw
|
|
7'b0100011: controls = 11'b0_01_01_0_0_1_0_0_0; // sw
|
|
7'b0110011: controls = 11'b1_xx_00_1_0_0_0_0_0; // R-type
|
|
7'b0010011: controls = 11'b1_00_01_1_0_0_0_0_0; // I-type ALU
|
|
7'b1100011: controls = 11'b0_10_11_0_0_0_0_1_0; // beq
|
|
7'b1101111: controls = 11'b1_11_11_0_1_0_0_0_1; // jal
|
|
default: controls = 11'bx_xx_xx_x_x_x_x_x_x; // non-implemented instruction
|
|
endcase
|
|
|
|
assign {RegWrite, ImmSrc, ALUSrc, ALUOp, ALUResultSrc, MemWrite,
|
|
ResultSrc, Branch, Jump} = controls;
|
|
|
|
// ALU Control Logic
|
|
assign Sub = ALUOp & ((Funct3 == 3'b000) & Funct7b5 & Op[5] | (Funct3 == 3'b010)); // subtract or SLT
|
|
assign ALUControl = {Sub, ALUOp};
|
|
|
|
// PCSrc logic
|
|
assign PCSrc = Branch & Eq | Jump;
|
|
endmodule
|
|
|
|
module datapath(
|
|
input logic clk, reset,
|
|
input logic [2:0] Funct3,
|
|
input logic ALUResultSrc, ResultSrc,
|
|
input logic [1:0] ALUSrc,
|
|
input logic RegWrite,
|
|
input logic [1:0] ImmSrc,
|
|
input logic [1:0] ALUControl,
|
|
output logic Eq,
|
|
input logic [31:0] PC, PCPlus4,
|
|
input logic [31:0] Instr,
|
|
output logic [31:0] IEUAdr, WriteData,
|
|
input logic [31:0] ReadData);
|
|
|
|
logic [31:0] ImmExt;
|
|
logic [31:0] R1, R2, SrcA, SrcB;
|
|
logic [31:0] ALUResult, IEUResult, Result;
|
|
|
|
// register file logic
|
|
regfile rf(.clk, .WE3(RegWrite), .A1(Instr[19:15]), .A2(Instr[24:20]),
|
|
.A3(Instr[11:7]), .WD3(Result), .RD1(R1), .RD2(R2));
|
|
extend ext(.Instr(Instr[31:7]), .ImmSrc, .ImmExt);
|
|
|
|
// ALU logic
|
|
cmp cmp(.R1, .R2, .Eq);
|
|
mux2 #(32) srcamux(R1, PC, ALUSrc[1], SrcA);
|
|
mux2 #(32) srcbmux(R2, ImmExt, ALUSrc[0], SrcB);
|
|
alu alu(.SrcA, .SrcB, .ALUControl, .Funct3, .ALUResult, .IEUAdr);
|
|
mux2 #(32) ieuresultmux(ALUResult, PCPlus4, ALUResultSrc, IEUResult);
|
|
mux2 #(32) resultmux(IEUResult, ReadData, ResultSrc, Result);
|
|
assign WriteData = R2;
|
|
endmodule
|
|
|
|
module regfile(
|
|
input logic clk,
|
|
input logic WE3,
|
|
input logic [ 4:0] A1, A2, A3,
|
|
input logic [31:0] WD3,
|
|
output logic [31:0] RD1, RD2);
|
|
|
|
logic [31:0] rf[31:1];
|
|
|
|
// three ported register file
|
|
// read two ports combinationally (A1/RD1, A2/RD2)
|
|
// write third port on rising edge of clock (A3/WD3/WE3)
|
|
// register 0 hardwired to 0
|
|
|
|
always_ff @(posedge clk)
|
|
if (WE3) rf[A3] <= WD3;
|
|
|
|
assign RD1 = (A1 != 0) ? rf[A1] : 0;
|
|
assign RD2 = (A2 != 0) ? rf[A2] : 0;
|
|
endmodule
|
|
|
|
module extend(
|
|
input logic [31:7] Instr,
|
|
input logic [1:0] ImmSrc,
|
|
output logic [31:0] ImmExt);
|
|
|
|
always_comb
|
|
case(ImmSrc)
|
|
// I-type
|
|
2'b00: ImmExt = {{20{Instr[31]}}, Instr[31:20]};
|
|
// S-type (stores)
|
|
2'b01: ImmExt = {{20{Instr[31]}}, Instr[31:25], Instr[11:7]};
|
|
// B-type (branches)
|
|
2'b10: ImmExt = {{20{Instr[31]}}, Instr[7], Instr[30:25], Instr[11:8], 1'b0};
|
|
// J-type (jal)
|
|
2'b11: ImmExt = {{12{Instr[31]}}, Instr[19:12], Instr[20], Instr[30:21], 1'b0};
|
|
default: ImmExt = 32'bx; // undefined
|
|
endcase
|
|
endmodule
|
|
|
|
module cmp(
|
|
input logic [31:0] R1, R2,
|
|
output logic Eq
|
|
);
|
|
|
|
assign Eq = (R1 == R2);
|
|
endmodule
|
|
|
|
|
|
module alu(
|
|
input logic [31:0] SrcA, SrcB,
|
|
input logic [1:0] ALUControl,
|
|
input logic [2:0] Funct3,
|
|
output logic [31:0] ALUResult, IEUAdr);
|
|
|
|
logic [31:0] CondInvb, Sum, SLT;
|
|
logic ALUOp, Sub, Overflow, Neg, LT;
|
|
logic [2:0] ALUFunct;
|
|
|
|
assign {Sub, ALUOp} = ALUControl;
|
|
|
|
// Add or subtract
|
|
assign CondInvb = Sub ? ~SrcB : SrcB;
|
|
assign Sum = SrcA + CondInvb + Sub;
|
|
assign IEUAdr = Sum; // Send this out to IFU and LSU
|
|
|
|
// Set less than based on subtraction result
|
|
assign Overflow = (SrcA[31] ^ SrcB[31]) & (SrcA[31] ^ Sum[31]);
|
|
assign Neg = Sum[31];
|
|
assign LT = Neg ^ Overflow;
|
|
assign SLT = {31'b0, LT};
|
|
|
|
assign ALUFunct = Funct3 & {3{ALUOp}}; // Force ALUFunct to 0 to Add when ALUOp = 0
|
|
always_comb
|
|
case (ALUFunct)
|
|
3'b000: ALUResult = Sum; // add or sub
|
|
3'b010: ALUResult = SLT; // slt
|
|
3'b110: ALUResult = SrcA | SrcB; // or
|
|
3'b111: ALUResult = SrcA & SrcB; // and
|
|
default: ALUResult = 'x;
|
|
endcase
|
|
endmodule
|
|
|
|
module lsu(
|
|
input logic clk, MemWrite,
|
|
input logic [31:0] IEUAdr, WriteData,
|
|
output logic [31:0] ReadData);
|
|
|
|
logic [31:0] RAM[63:0];
|
|
|
|
assign ReadData = RAM[IEUAdr[7:2]]; // word aligned
|
|
|
|
always_ff @(posedge clk)
|
|
if (MemWrite) RAM[IEUAdr[7:2]] <= WriteData;
|
|
endmodule
|
|
|
|
module flopr #(parameter WIDTH = 8) (
|
|
input logic clk, reset,
|
|
input logic [WIDTH-1:0] d,
|
|
output logic [WIDTH-1:0] q);
|
|
|
|
always_ff @(posedge clk, posedge reset)
|
|
if (reset) q <= 0;
|
|
else q <= d;
|
|
endmodule
|
|
|
|
module mux2 #(parameter WIDTH = 8) (
|
|
input logic [WIDTH-1:0] d0, d1,
|
|
input logic s,
|
|
output logic [WIDTH-1:0] y);
|
|
|
|
assign y = s ? d1 : d0;
|
|
endmodule
|
|
|
|
module adder(input [31:0] a, b,
|
|
output [31:0] y);
|
|
|
|
assign y = a + b;
|
|
endmodule
|
|
|