mirror of
https://github.com/openhwgroup/cvw
synced 2025-01-30 16:34:28 +00:00
694 lines
29 KiB
Systemverilog
694 lines
29 KiB
Systemverilog
///////////////////////////////////////////
|
|
// testbench-linux.sv
|
|
//
|
|
// Written: nboorstin@g.hmc.edu 2021
|
|
// Modified:
|
|
//
|
|
// Purpose: Testbench for buildroot or busybear linux
|
|
//
|
|
// A component of the Wally configurable RISC-V project.
|
|
//
|
|
// Copyright (C) 2021 Harvey Mudd College & Oklahoma State University
|
|
//
|
|
// Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation
|
|
// files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy,
|
|
// modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software
|
|
// is furnished to do so, subject to the following conditions:
|
|
//
|
|
// The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
|
|
//
|
|
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
// OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
|
|
// BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
|
|
// OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
|
///////////////////////////////////////////
|
|
|
|
`include "wally-config.vh"
|
|
|
|
`define DEBUG_TRACE 0
|
|
`define DontHaltOnCSRMisMatch 1
|
|
|
|
module testbench();
|
|
|
|
parameter waveOnICount = `BUSYBEAR*140000 + `BUILDROOT*3080000; // # of instructions at which to turn on waves in graphical sim
|
|
parameter stopICount = `BUSYBEAR*143898 + `BUILDROOT*0000000; // # instructions at which to halt sim completely (set to 0 to let it run as far as it can)
|
|
|
|
string ProgramAddrMapFile, ProgramLabelMapFile;
|
|
|
|
///////////////////////////////////////////////////////////////////////////////
|
|
///////////////////////////////////// DUT /////////////////////////////////////
|
|
///////////////////////////////////////////////////////////////////////////////
|
|
logic clk, reset;
|
|
|
|
logic [`AHBW-1:0] readDataExpected;
|
|
logic [31:0] HADDR;
|
|
logic [`AHBW-1:0] HWDATA;
|
|
logic HWRITE;
|
|
logic [2:0] HSIZE;
|
|
logic [2:0] HBURST;
|
|
logic [3:0] HPROT;
|
|
logic [1:0] HTRANS;
|
|
logic HMASTLOCK;
|
|
logic HCLK, HRESETn;
|
|
logic [`AHBW-1:0] HRDATAEXT;
|
|
logic HREADYEXT, HRESPEXT;
|
|
|
|
logic [31:0] GPIOPinsIn;
|
|
logic [31:0] GPIOPinsOut, GPIOPinsEn;
|
|
logic UARTSin, UARTSout;
|
|
assign GPIOPinsIn = 0;
|
|
assign UARTSin = 1;
|
|
|
|
wallypipelinedsoc dut(.*);
|
|
|
|
///////////////////////////////////////////////////////////////////////////////
|
|
//////////////////////// Signals & Shared Macros ///////////////////////////
|
|
//////////////////////// AKA stuff that comes first ///////////////////////////
|
|
///////////////////////////////////////////////////////////////////////////////
|
|
// Sorry if these have gotten decontextualized.
|
|
// Verilog expects them to be defined before they are used.
|
|
|
|
// -------------------
|
|
// Signal Declarations
|
|
// -------------------
|
|
// Testbench Core
|
|
integer instrs;
|
|
integer warningCount = 0;
|
|
// PC, Instr Checking
|
|
logic [`XLEN-1:0] PCW;
|
|
integer data_file_all;
|
|
|
|
// Write Back stage signals needed for trace compare, but don't actually
|
|
// exist in CPU.
|
|
logic [`XLEN-1:0] MemAdrW, WriteDataW;
|
|
|
|
// Write Back trace signals
|
|
logic checkInstrW;
|
|
|
|
//integer RegAdr;
|
|
|
|
integer fault;
|
|
logic TrapW;
|
|
|
|
// Signals used to parse the trace file.
|
|
logic checkInstrM;
|
|
integer matchCount;
|
|
string line;
|
|
logic [`XLEN-1:0] ExpectedPCM;
|
|
logic [31:0] ExpectedInstrM;
|
|
string textM;
|
|
string token;
|
|
string ExpectedTokens [31:0];
|
|
integer index;
|
|
integer StartIndex, EndIndex;
|
|
integer TokenIndex;
|
|
integer MarkerIndex;
|
|
integer NumCSRM;
|
|
|
|
// Memory stage expected values from trace
|
|
string RegWriteM;
|
|
integer ExpectedRegAdrM;
|
|
logic [`XLEN-1:0] ExpectedRegValueM;
|
|
string MemOpM;
|
|
logic [`XLEN-1:0] ExpectedMemAdrM, ExpectedMemReadDataM, ExpectedMemWriteDataM;
|
|
string ExpectedCSRArrayM[10:0];
|
|
logic [`XLEN-1:0] ExpectedCSRArrayValueM[10:0];
|
|
|
|
// Write back stage expected values from trace
|
|
logic [`XLEN-1:0] ExpectedPCW;
|
|
logic [31:0] ExpectedInstrW;
|
|
string textW;
|
|
string RegWriteW;
|
|
integer ExpectedRegAdrW;
|
|
logic [`XLEN-1:0] ExpectedRegValueW;
|
|
string MemOpW;
|
|
logic [`XLEN-1:0] ExpectedMemAdrW, ExpectedMemReadDataW, ExpectedMemWriteDataW;
|
|
integer NumCSRW;
|
|
string ExpectedCSRArrayW[10:0];
|
|
logic [`XLEN-1:0] ExpectedCSRArrayValueW[10:0];
|
|
logic [`XLEN-1:0] ExpectedIntType;
|
|
integer NumCSRMIndex;
|
|
integer NumCSRWIndex;
|
|
integer NumCSRPostWIndex;
|
|
// logic CurrentInterruptForce;
|
|
logic [`XLEN-1:0] InstrCountW;
|
|
|
|
// -----------
|
|
// Error Macro
|
|
// -----------
|
|
`define ERROR \
|
|
$display("processed %0d instructions with %0d warnings", instrs, warningCount); \
|
|
$stop;
|
|
|
|
initial begin
|
|
data_file_all = $fopen({`LINUX_TEST_VECTORS,"all.txt"}, "r");
|
|
InstrCountW = '0;
|
|
end
|
|
|
|
/* -----\/----- EXCLUDED -----\/-----
|
|
initial begin
|
|
CurrentInterruptForce = 1'b0;
|
|
end
|
|
-----/\----- EXCLUDED -----/\----- */
|
|
|
|
assign checkInstrM = dut.hart.ieu.InstrValidM & ~dut.hart.priv.trap.InstrPageFaultM & ~dut.hart.priv.trap.InterruptM & ~dut.hart.StallM;
|
|
// trapW will already be invalid in there was an InstrPageFault in the previous instruction.
|
|
assign checkInstrW = dut.hart.ieu.InstrValidW & ~dut.hart.StallW;
|
|
|
|
flopenrc #(`XLEN) MemAdrWReg(clk, reset, dut.hart.FlushW, ~dut.hart.StallW, dut.hart.ieu.dp.MemAdrM, MemAdrW);
|
|
flopenrc #(`XLEN) WriteDataWReg(clk, reset, dut.hart.FlushW, ~dut.hart.StallW, dut.hart.WriteDataM, WriteDataW);
|
|
flopenrc #(`XLEN) PCWReg(clk, reset, dut.hart.FlushW, ~dut.hart.ieu.dp.StallW, dut.hart.ifu.PCM, PCW);
|
|
flopenr #(1) TrapWReg(clk, reset, ~dut.hart.StallW, dut.hart.hzu.TrapM, TrapW);
|
|
|
|
// because qemu does not match exactly to wally it is necessary to read the the
|
|
// trace in the memory stage and detect if anything in wally must be overwritten.
|
|
// This includes mtimer, interrupts, and various bits in mstatus and xtval.
|
|
|
|
// then on the next posedge the expected state is registered.
|
|
// on the next falling edge the expected state is compared to the wally state.
|
|
|
|
// step 0: read the expected state
|
|
always @(negedge clk) begin
|
|
// always check PC, instruction bits
|
|
if (checkInstrM) begin
|
|
// read 1 line of the trace file
|
|
matchCount = $fgets(line, data_file_all);
|
|
if(`DEBUG_TRACE > 1) $display("Time %t, line %x", $time, line);
|
|
matchCount = $sscanf(line, "%x %x %s", ExpectedPCM, ExpectedInstrM, textM);
|
|
//$display("matchCount %d, PCM %x ExpectedInstrM %x textM %x", matchCount, ExpectedPCM, ExpectedInstrM, textM);
|
|
|
|
// for the life of me I cannot get any build in C or C++ string parsing functions/methods to work.
|
|
// strtok was the best idea but it cannot be used correctly as system verilog does not have null
|
|
// terminated strings.
|
|
|
|
// Just going to do this char by char.
|
|
StartIndex = 0;
|
|
TokenIndex = 0;
|
|
//$display("len = %d", line.len());
|
|
for(index = 0; index < line.len(); index++) begin
|
|
//$display("char = %s", line[index]);
|
|
if (line[index] == " " || line[index] == "\n") begin
|
|
EndIndex = index;
|
|
ExpectedTokens[TokenIndex] = line.substr(StartIndex, EndIndex-1);
|
|
//$display("In Tokenizer %s", line.substr(StartIndex, EndIndex-1));
|
|
StartIndex = EndIndex + 1;
|
|
TokenIndex++;
|
|
end
|
|
end
|
|
|
|
MarkerIndex = 3;
|
|
NumCSRM = 0;
|
|
MemOpM = "";
|
|
RegWriteM = "";
|
|
|
|
#2;
|
|
|
|
while(TokenIndex > MarkerIndex) begin
|
|
// parse the GPR
|
|
if (ExpectedTokens[MarkerIndex] == "GPR") begin
|
|
RegWriteM = ExpectedTokens[MarkerIndex];
|
|
matchCount = $sscanf(ExpectedTokens[MarkerIndex+1], "%d", ExpectedRegAdrM);
|
|
matchCount = $sscanf(ExpectedTokens[MarkerIndex+2], "%x", ExpectedRegValueM);
|
|
|
|
MarkerIndex += 3;
|
|
|
|
// parse memory address, read data, and/or write data
|
|
end else if(ExpectedTokens[MarkerIndex].substr(0, 2) == "Mem") begin
|
|
MemOpM = ExpectedTokens[MarkerIndex];
|
|
matchCount = $sscanf(ExpectedTokens[MarkerIndex+1], "%x", ExpectedMemAdrM);
|
|
matchCount = $sscanf(ExpectedTokens[MarkerIndex+2], "%x", ExpectedMemWriteDataM);
|
|
matchCount = $sscanf(ExpectedTokens[MarkerIndex+3], "%x", ExpectedMemReadDataM);
|
|
|
|
MarkerIndex += 4;
|
|
|
|
// parse CSRs, because there are 1 or more CSRs after the CSR token
|
|
// we check if the CSR token or the number of CSRs is greater than 0.
|
|
// if so then we want to parse for a CSR.
|
|
end else if(ExpectedTokens[MarkerIndex] == "CSR" || NumCSRM > 0) begin
|
|
if(ExpectedTokens[MarkerIndex] == "CSR") begin
|
|
// all additional CSR's won't have this token.
|
|
MarkerIndex++;
|
|
end
|
|
matchCount = $sscanf(ExpectedTokens[MarkerIndex], "%s", ExpectedCSRArrayM[NumCSRM]);
|
|
matchCount = $sscanf(ExpectedTokens[MarkerIndex+1], "%x", ExpectedCSRArrayValueM[NumCSRM]);
|
|
|
|
MarkerIndex += 2;
|
|
|
|
// if we get an xcause with the interrupt bit set we must generate an interrupt as interrupts
|
|
// are imprecise. Forcing the trap at this time will allow wally to track what qemu does.
|
|
// the msb of xcause will be set.
|
|
// bits 1:0 select mode; 0 = user, 1 = superviser, 3 = machine
|
|
// bits 3:2 select the type of interrupt, 0 = software, 1 = timer, 2 = external
|
|
if(ExpectedCSRArrayM[NumCSRM].substr(1, 5) == "cause" && (ExpectedCSRArrayValueM[NumCSRM][`XLEN-1] == 1'b1)) begin
|
|
//what type?
|
|
ExpectedIntType = ExpectedCSRArrayValueM[NumCSRM] & 64'h0000_000C;
|
|
$display("%t: CSR = %s. Forcing interrupt of cause = %x", $time, ExpectedCSRArrayM[NumCSRM], ExpectedCSRArrayValueM[NumCSRM]);
|
|
|
|
if(ExpectedIntType == 0) begin
|
|
force dut.hart.priv.SwIntM = 1'b1;
|
|
$display("Force SwIntM");
|
|
end
|
|
else if(ExpectedIntType == 4) begin
|
|
force dut.hart.priv.TimerIntM = 1'b1;
|
|
$display("Force TimeIntM");
|
|
end
|
|
else if(ExpectedIntType == 8) begin
|
|
force dut.hart.priv.ExtIntM = 1'b1;
|
|
$display("Force ExtIntM");
|
|
end
|
|
end
|
|
NumCSRM++;
|
|
end
|
|
end
|
|
// override on special conditions
|
|
if (ExpectedMemAdrM == 'h10000005) begin
|
|
//$display("%t: Overwriting read data from CLINT.", $time);
|
|
force dut.hart.ieu.dp.ReadDataM = ExpectedMemReadDataM;
|
|
end
|
|
if(textM.substr(0,5) == "rdtime") begin
|
|
$display("%t: Overwrite read value of CSR on read of MTIME in memory stage.", $time);
|
|
force dut.hart.priv.csr.CSRReadValM = ExpectedRegValueM;
|
|
//dut.hart.ieu.dp.regf.wd3
|
|
end
|
|
|
|
end // if (checkInstrM)
|
|
end
|
|
|
|
// step 1: register expected state into the write back stage.
|
|
always @(posedge clk) begin
|
|
if (reset) begin
|
|
ExpectedPCW <= '0;
|
|
ExpectedInstrW <= '0;
|
|
textW <= "";
|
|
RegWriteW <= "";
|
|
ExpectedRegAdrW <= '0;
|
|
ExpectedRegValueW <= '0;
|
|
ExpectedMemAdrW <= '0;
|
|
MemOpW <= "";
|
|
ExpectedMemWriteDataW <= '0;
|
|
ExpectedMemReadDataW <= '0;
|
|
NumCSRW <= '0;
|
|
end
|
|
else if(~dut.hart.StallW) begin
|
|
if(dut.hart.FlushW) begin
|
|
ExpectedPCW <= '0;
|
|
ExpectedInstrW <= '0;
|
|
textW <= "";
|
|
RegWriteW <= "";
|
|
ExpectedRegAdrW <= '0;
|
|
ExpectedRegValueW <= '0;
|
|
ExpectedMemAdrW <= '0;
|
|
MemOpW <= "";
|
|
ExpectedMemWriteDataW <= '0;
|
|
ExpectedMemReadDataW <= '0;
|
|
NumCSRW <= '0;
|
|
end else begin
|
|
ExpectedPCW <= ExpectedPCM;
|
|
ExpectedInstrW <= ExpectedInstrM;
|
|
textW <= textM;
|
|
RegWriteW <= RegWriteM;
|
|
ExpectedRegAdrW <= ExpectedRegAdrM;
|
|
ExpectedRegValueW <= ExpectedRegValueM;
|
|
ExpectedMemAdrW <= ExpectedMemAdrM;
|
|
MemOpW <= MemOpM;
|
|
ExpectedMemWriteDataW <= ExpectedMemWriteDataM;
|
|
ExpectedMemReadDataW <= ExpectedMemReadDataM;
|
|
NumCSRW <= NumCSRM;
|
|
for(NumCSRWIndex = 0; NumCSRWIndex < NumCSRM; NumCSRWIndex++) begin
|
|
ExpectedCSRArrayW[NumCSRWIndex] = ExpectedCSRArrayM[NumCSRWIndex];
|
|
ExpectedCSRArrayValueW[NumCSRWIndex] = ExpectedCSRArrayValueM[NumCSRWIndex];
|
|
end
|
|
end
|
|
// override on special conditions
|
|
#1;
|
|
|
|
|
|
if(~dut.hart.StallW) begin
|
|
if(textM.substr(0,5) == "rdtime") begin
|
|
$display("%t:Releasing force of CSRReadValM.", $time);
|
|
release dut.hart.priv.csr.CSRReadValM;
|
|
//release dut.hart.ieu.dp.regf.wd3;
|
|
end
|
|
|
|
if (ExpectedMemAdrM == 'h10000005) begin
|
|
//$display("%t: releasing force of ReadDataM.", $time);
|
|
release dut.hart.ieu.dp.ReadDataM;
|
|
end
|
|
|
|
// remove forces on interrupts
|
|
for(NumCSRMIndex = 0; NumCSRMIndex < NumCSRM; NumCSRMIndex++) begin
|
|
if(ExpectedCSRArrayM[NumCSRMIndex].substr(1, 5) == "cause" && (ExpectedCSRArrayValueM[NumCSRMIndex][`XLEN-1] == 1'b1)) begin
|
|
//what type?
|
|
$display("%t: Releasing all forces on interrupts", $time);
|
|
|
|
release dut.hart.priv.SwIntM;
|
|
release dut.hart.priv.TimerIntM;
|
|
release dut.hart.priv.ExtIntM;
|
|
end
|
|
end
|
|
end
|
|
end
|
|
end
|
|
|
|
// step2: make all checks in the write back stage.
|
|
always @(negedge clk) begin
|
|
// always check PC, instruction bits
|
|
if (checkInstrW) begin
|
|
InstrCountW += 1;
|
|
// check PCW
|
|
fault = 0;
|
|
if(PCW != ExpectedPCW) begin
|
|
$display("PCW: %016x does not equal ExpectedPCW: %016x", PCW, ExpectedPCW);
|
|
fault = 1;
|
|
end
|
|
|
|
// check instruction value
|
|
if(dut.hart.ifu.InstrW != ExpectedInstrW) begin
|
|
$display("InstrW: %x does not equal ExpectedInstrW: %x", dut.hart.ifu.InstrW, ExpectedInstrW);
|
|
fault = 1;
|
|
end
|
|
|
|
// check the number of instructions
|
|
if(dut.hart.priv.csr.genblk1.counters.genblk1.INSTRET_REGW != InstrCountW) begin
|
|
$display("%t, Number of instruction Retired = %d does not equal number of instructions in trace = %d", $time, dut.hart.priv.csr.genblk1.counters.genblk1.INSTRET_REGW, InstrCountW);
|
|
if(!`DontHaltOnCSRMisMatch) fault = 1;
|
|
end
|
|
|
|
#2; // delay 2 ns.
|
|
|
|
|
|
if(`DEBUG_TRACE > 2) begin
|
|
$display("Reg Write Address: %02d ? expected value: %02d", dut.hart.ieu.dp.regf.a3, ExpectedRegAdrW);
|
|
$display("RF[%02d]: %016x ? expected value: %016x", ExpectedRegAdrW, dut.hart.ieu.dp.regf.rf[ExpectedRegAdrW], ExpectedRegValueW);
|
|
end
|
|
|
|
if (RegWriteW == "GPR") begin
|
|
if (dut.hart.ieu.dp.regf.a3 != ExpectedRegAdrW) begin
|
|
$display("Reg Write Address: %02d does not equal expected value: %02d", dut.hart.ieu.dp.regf.a3, ExpectedRegAdrW);
|
|
fault = 1;
|
|
end
|
|
|
|
if (dut.hart.ieu.dp.regf.rf[ExpectedRegAdrW] != ExpectedRegValueW) begin
|
|
$display("RF[%02d]: %016x does not equal expected value: %016x", ExpectedRegAdrW, dut.hart.ieu.dp.regf.rf[ExpectedRegAdrW], ExpectedRegValueW);
|
|
fault = 1;
|
|
end
|
|
end
|
|
|
|
if (MemOpW.substr(0,2) == "Mem") begin
|
|
if(`DEBUG_TRACE > 3) $display("\tMemAdrW: %016x ? expected: %016x", MemAdrW, ExpectedMemAdrW);
|
|
|
|
// always check address
|
|
if (MemAdrW != ExpectedMemAdrW) begin
|
|
$display("MemAdrW: %016x does not equal expected value: %016x", MemAdrW, ExpectedMemAdrW);
|
|
fault = 1;
|
|
end
|
|
|
|
// check read data
|
|
if(MemOpW == "MemR" || MemOpW == "MemRW") begin
|
|
if(`DEBUG_TRACE > 3) $display("\tReadDataW: %016x ? expected: %016x", dut.hart.ieu.dp.ReadDataW, ExpectedMemReadDataW);
|
|
if (dut.hart.ieu.dp.ReadDataW != ExpectedMemReadDataW) begin
|
|
$display("ReadDataW: %016x does not equal expected value: %016x", dut.hart.ieu.dp.ReadDataW, ExpectedMemReadDataW);
|
|
fault = 1;
|
|
end
|
|
end
|
|
|
|
// check write data
|
|
else if(ExpectedTokens[MarkerIndex] == "MemW" || ExpectedTokens[MarkerIndex] == "MemRW") begin
|
|
if(`DEBUG_TRACE > 3) $display("\tWriteDataW: %016x ? expected: %016x", WriteDataW, ExpectedMemWriteDataW);
|
|
if (WriteDataW != ExpectedMemWriteDataW) begin
|
|
$display("WriteDataW: %016x does not equal expected value: %016x", WriteDataW, ExpectedMemWriteDataW);
|
|
fault = 1;
|
|
end
|
|
end
|
|
end
|
|
|
|
|
|
// check csr
|
|
//$display("%t, about to check csr, NumCSRW = %d", $time, NumCSRW);
|
|
for(NumCSRPostWIndex = 0; NumCSRPostWIndex < NumCSRW; NumCSRPostWIndex++) begin
|
|
/* -----\/----- EXCLUDED -----\/-----
|
|
if(`DEBUG_TRACE > 0) begin
|
|
$display("%t, NumCSRPostWIndex = %d, Expected CSR: %s = %016x", $time, NumCSRPostWIndex, ExpectedCSRArrayW[NumCSRPostWIndex], ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
end
|
|
-----/\----- EXCLUDED -----/\----- */
|
|
case(ExpectedCSRArrayW[NumCSRPostWIndex])
|
|
"mhartid": begin
|
|
if(`DEBUG_TRACE > 0) begin
|
|
$display("CSR: %s = %016x, expected = %016x", ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrm.MHARTID_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
end
|
|
if (dut.hart.priv.csr.genblk1.csrm.MHARTID_REGW != ExpectedCSRArrayValueW[NumCSRPostWIndex]) begin
|
|
$display("%t, CSR: %s = %016x, does not equal expected value %016x", $time, ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrm.MHARTID_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
if(!`DontHaltOnCSRMisMatch) fault = 1;
|
|
end
|
|
end
|
|
"mstatus": begin
|
|
if(`DEBUG_TRACE > 0) begin
|
|
$display("CSR: %s = %016x, expected = %016x", ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrm.MSTATUS_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
end
|
|
if ((dut.hart.priv.csr.genblk1.csrm.MSTATUS_REGW) != (ExpectedCSRArrayValueW[NumCSRPostWIndex])) begin
|
|
$display("%t, CSR: %s = %016x, does not equal expected value %016x", $time, ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrm.MSTATUS_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
if(!`DontHaltOnCSRMisMatch) fault = 1;
|
|
end
|
|
end
|
|
"mtvec": begin
|
|
if(`DEBUG_TRACE > 0) begin
|
|
$display("CSR: %s = %016x, expected = %016x", ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrm.MTVEC_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
end
|
|
if (dut.hart.priv.csr.genblk1.csrm.MTVEC_REGW != ExpectedCSRArrayValueW[NumCSRPostWIndex]) begin
|
|
$display("%t, CSR: %s = %016x, does not equal expected value %016x", $time, ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrm.MTVEC_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
if(!`DontHaltOnCSRMisMatch) fault = 1;
|
|
end
|
|
end
|
|
"mip": begin
|
|
if(`DEBUG_TRACE > 0) begin
|
|
$display("CSR: %s = %016x, expected = %016x", ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrm.MIP_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
end
|
|
if (dut.hart.priv.csr.genblk1.csrm.MIP_REGW != ExpectedCSRArrayValueW[NumCSRPostWIndex]) begin
|
|
$display("%t, CSR: %s = %016x, does not equal expected value %016x", $time, ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrm.MIP_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
if(!`DontHaltOnCSRMisMatch) fault = 1;
|
|
end
|
|
end
|
|
"mie": begin
|
|
if(`DEBUG_TRACE > 0) begin
|
|
$display("CSR: %s = %016x, expected = %016x", ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrm.MIE_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
end
|
|
if (dut.hart.priv.csr.genblk1.csrm.MIE_REGW != ExpectedCSRArrayValueW[NumCSRPostWIndex]) begin
|
|
$display("%t, CSR: %s = %016x, does not equal expected value %016x", $time, ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrm.MIE_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
if(!`DontHaltOnCSRMisMatch) fault = 1;
|
|
end
|
|
end
|
|
"mideleg": begin
|
|
if(`DEBUG_TRACE > 0) begin
|
|
$display("CSR: %s = %016x, expected = %016x", ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrm.MIDELEG_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
end
|
|
if (dut.hart.priv.csr.genblk1.csrm.MIDELEG_REGW != ExpectedCSRArrayValueW[NumCSRPostWIndex]) begin
|
|
$display("%t, CSR: %s = %016x, does not equal expected value %016x", $time, ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrm.MIDELEG_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
if(!`DontHaltOnCSRMisMatch) fault = 1;
|
|
end
|
|
end
|
|
"medeleg": begin
|
|
if(`DEBUG_TRACE > 0) begin
|
|
$display("CSR: %s = %016x, expected = %016x", ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrm.MEDELEG_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
end
|
|
if (dut.hart.priv.csr.genblk1.csrm.MEDELEG_REGW != ExpectedCSRArrayValueW[NumCSRPostWIndex]) begin
|
|
$display("%t, CSR: %s = %016x, does not equal expected value %016x", $time, ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrm.MEDELEG_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
if(!`DontHaltOnCSRMisMatch) fault = 1;
|
|
end
|
|
end
|
|
"mepc": begin
|
|
if(`DEBUG_TRACE > 0) begin
|
|
$display("CSR: %s = %016x, expected = %016x", ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrm.MEPC_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
end
|
|
if (dut.hart.priv.csr.genblk1.csrm.MEPC_REGW != ExpectedCSRArrayValueW[NumCSRPostWIndex]) begin
|
|
$display("%t, CSR: %s = %016x, does not equal expected value %016x", $time, ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrm.MEPC_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
if(!`DontHaltOnCSRMisMatch) fault = 1;
|
|
end
|
|
end
|
|
|
|
"mtval": begin
|
|
if(`DEBUG_TRACE > 0) begin
|
|
$display("CSR: %s = %016x, expected = %016x", ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrm.MTVAL_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
end
|
|
if (dut.hart.priv.csr.genblk1.csrm.MTVAL_REGW != ExpectedCSRArrayValueW[NumCSRPostWIndex]) begin
|
|
$display("%t, CSR: %s = %016x, does not equal expected value %016x", $time, ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrm.MTVAL_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
if(!`DontHaltOnCSRMisMatch) fault = 1;
|
|
end
|
|
end
|
|
|
|
"sepc": begin
|
|
if(`DEBUG_TRACE > 0) begin
|
|
$display("CSR: %s = %016x, expected = %016x", ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrs.SEPC_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
end
|
|
if (dut.hart.priv.csr.genblk1.csrs.SEPC_REGW != ExpectedCSRArrayValueW[NumCSRPostWIndex]) begin
|
|
$display("%t, CSR: %s = %016x, does not equal expected value %016x", $time, ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrs.SEPC_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
if(!`DontHaltOnCSRMisMatch) fault = 1;
|
|
end
|
|
end
|
|
"scause": begin
|
|
if(`DEBUG_TRACE > 0) begin
|
|
$display("CSR: %s = %016x, expected = %016x", ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrs.genblk1.SCAUSE_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
end
|
|
if (dut.hart.priv.csr.genblk1.csrs.genblk1.SCAUSE_REGW != ExpectedCSRArrayValueW[NumCSRPostWIndex]) begin
|
|
$display("%t, CSR: %s = %016x, does not equal expected value %016x", $time, ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrs.genblk1.SCAUSE_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
if(!`DontHaltOnCSRMisMatch) fault = 1;
|
|
end
|
|
end
|
|
"stvec": begin
|
|
if(`DEBUG_TRACE > 0) begin
|
|
$display("CSR: %s = %016x, expected = %016x", ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrs.STVEC_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
end
|
|
if (dut.hart.priv.csr.genblk1.csrs.STVEC_REGW != ExpectedCSRArrayValueW[NumCSRPostWIndex]) begin
|
|
$display("%t, CSR: %s = %016x, does not equal expected value %016x", $time, ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrs.STVEC_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
if(!`DontHaltOnCSRMisMatch) fault = 1;
|
|
end
|
|
end
|
|
"stval": begin
|
|
if(`DEBUG_TRACE > 0) begin
|
|
$display("CSR: %s = %016x, expected = %016x", ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrs.genblk1.STVAL_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
end
|
|
if (dut.hart.priv.csr.genblk1.csrs.genblk1.STVAL_REGW != ExpectedCSRArrayValueW[NumCSRPostWIndex]) begin
|
|
$display("%t, CSR: %s = %016x, does not equal expected value %016x", $time, ExpectedCSRArrayW[NumCSRPostWIndex], dut.hart.priv.csr.genblk1.csrs.genblk1.STVAL_REGW, ExpectedCSRArrayValueW[NumCSRPostWIndex]);
|
|
if(!`DontHaltOnCSRMisMatch) fault = 1;
|
|
end
|
|
end
|
|
endcase // case (ExpectedCSRArrayW[NumCSRPostWIndex])
|
|
|
|
/* -----\/----- EXCLUDED -----\/-----
|
|
if(CurrentInterruptForce) begin
|
|
CurrentInterruptForce = 1'b0;
|
|
// remove forces on interrupts
|
|
$display("%t: Releasing all forces on interrupts", $time);
|
|
|
|
release dut.hart.priv.SwIntM;
|
|
release dut.hart.priv.TimerIntM;
|
|
release dut.hart.priv.ExtIntM;
|
|
end
|
|
-----/\----- EXCLUDED -----/\----- */
|
|
|
|
end // for (NumCSRPostWIndex = 0; NumCSRPostWIndex < NumCSRW; NumCSRPostWIndex++)
|
|
if (fault == 1) begin
|
|
`ERROR
|
|
end
|
|
end // if (checkInstrW)
|
|
end // always @ (negedge clk)
|
|
|
|
|
|
// track the current function
|
|
FunctionName FunctionName(.reset(reset),
|
|
.clk(clk),
|
|
.ProgramAddrMapFile(ProgramAddrMapFile),
|
|
.ProgramLabelMapFile(ProgramLabelMapFile));
|
|
|
|
|
|
///////////////////////////////////////////////////////////////////////////////
|
|
//////////////////////////////// Testbench Core ///////////////////////////////
|
|
///////////////////////////////////////////////////////////////////////////////
|
|
|
|
// --------------
|
|
// Initialization
|
|
// --------------
|
|
initial
|
|
begin
|
|
instrs = 0;
|
|
reset <= 1; # 22; reset <= 0;
|
|
end
|
|
// initial loading of memories
|
|
initial begin
|
|
$readmemh({`LINUX_TEST_VECTORS,"bootmem.txt"}, dut.uncore.bootdtim.bootdtim.RAM, 'h1000 >> 3);
|
|
$readmemh({`LINUX_TEST_VECTORS,"ram.txt"}, dut.uncore.dtim.RAM);
|
|
$readmemb(`TWO_BIT_PRELOAD, dut.hart.ifu.bpred.bpred.Predictor.DirPredictor.PHT.memory);
|
|
$readmemb(`BTB_PRELOAD, dut.hart.ifu.bpred.bpred.TargetPredictor.memory.memory);
|
|
ProgramAddrMapFile = {`LINUX_TEST_VECTORS,"vmlinux.objdump.addr"};
|
|
ProgramLabelMapFile = {`LINUX_TEST_VECTORS,"vmlinux.objdump.lab"};
|
|
end
|
|
|
|
// -------
|
|
// Running
|
|
// -------
|
|
always
|
|
begin
|
|
clk <= 1; # 5; clk <= 0; # 5;
|
|
end
|
|
|
|
|
|
///////////////////////////////////////////////////////////////////////////////
|
|
///////////////////////////////// Miscellaneous ///////////////////////////////
|
|
///////////////////////////////////////////////////////////////////////////////
|
|
// Instr Opcode Tracking
|
|
// For waveview convenience
|
|
string InstrFName, InstrDName, InstrEName, InstrMName, InstrWName;
|
|
logic [31:0] InstrW;
|
|
instrTrackerTB it(clk, reset, dut.hart.ieu.dp.FlushE,
|
|
dut.hart.ifu.icache.controller.FinalInstrRawF,
|
|
dut.hart.ifu.InstrD, dut.hart.ifu.InstrE,
|
|
dut.hart.ifu.InstrM, dut.hart.ifu.InstrW,
|
|
InstrFName, InstrDName, InstrEName, InstrMName, InstrWName);
|
|
|
|
// ------------------
|
|
// Address Translator
|
|
// ------------------
|
|
/**
|
|
* Walk the page table stored in dtim according to sv39 logic and translate a
|
|
* virtual address to a physical address.
|
|
*
|
|
* See section 4.3.2 of the RISC-V Privileged specification for a full
|
|
* explanation of the below algorithm.
|
|
*/
|
|
logic SvMode, PTE_R, PTE_X;
|
|
logic [`XLEN-1:0] SATP, PTE;
|
|
logic [55:0] BaseAdr, PAdr;
|
|
logic [8:0] VPN [2:0];
|
|
logic [11:0] Offset;
|
|
function logic [`XLEN-1:0] adrTranslator(
|
|
input logic [`XLEN-1:0] adrIn);
|
|
begin
|
|
int i;
|
|
// Grab the SATP register from privileged unit
|
|
SATP = dut.hart.priv.csr.SATP_REGW;
|
|
// Split the virtual address into page number segments and offset
|
|
VPN[2] = adrIn[38:30];
|
|
VPN[1] = adrIn[29:21];
|
|
VPN[0] = adrIn[20:12];
|
|
Offset = adrIn[11:0];
|
|
// We do not support sv48; only sv39
|
|
SvMode = SATP[63];
|
|
// Only perform translation if translation is on and the processor is not
|
|
// in machine mode
|
|
if (SvMode && (dut.hart.priv.PrivilegeModeW != `M_MODE)) begin
|
|
BaseAdr = SATP[43:0] << 12;
|
|
for (i = 2; i >= 0; i--) begin
|
|
PAdr = BaseAdr + (VPN[i] << 3);
|
|
// dtim.RAM is 64-bit addressed. PAdr specifies a byte. We right shift
|
|
// by 3 (the PTE size) to get the requested 64-bit PTE.
|
|
PTE = dut.uncore.dtim.RAM[PAdr >> 3];
|
|
PTE_R = PTE[1];
|
|
PTE_X = PTE[3];
|
|
if (PTE_R || PTE_X) begin
|
|
// Leaf page found
|
|
break;
|
|
end else begin
|
|
// Go to next level of table
|
|
BaseAdr = PTE[53:10] << 12;
|
|
end
|
|
end
|
|
// Determine which parts of the PTE page number to use based on the
|
|
// level of the page table we reached.
|
|
if (i == 2) begin
|
|
// Gigapage
|
|
assign adrTranslator = {8'b0, PTE[53:28], VPN[1], VPN[0], Offset};
|
|
end else if (i == 1) begin
|
|
// Megapage
|
|
assign adrTranslator = {8'b0, PTE[53:19], VPN[0], Offset};
|
|
end else begin
|
|
// Kilopage
|
|
assign adrTranslator = {8'b0, PTE[53:10], Offset};
|
|
end
|
|
end else begin
|
|
// Direct translation if address translation is not on
|
|
assign adrTranslator = adrIn;
|
|
end
|
|
end
|
|
endfunction
|
|
endmodule
|
|
|