mirror of
https://github.com/openhwgroup/cvw
synced 2025-02-11 06:05:49 +00:00
86 lines
3.3 KiB
Systemverilog
86 lines
3.3 KiB
Systemverilog
///////////////////////////////////////////
|
|
// shifter.sv
|
|
//
|
|
// Written: David_Harris@hmc.edu, Sarah.Harris@unlv.edu, Kevin Kim <kekim@hmc.edu>
|
|
// Created: 9 January 2021
|
|
// Modified: 6 February 2023
|
|
//
|
|
// Purpose: RISC-V 32/64 bit shifter
|
|
//
|
|
// Documentation: RISC-V System on Chip Design Chapter 4 (Figure 4.5, Table 4.3)
|
|
//
|
|
// A component of the CORE-V-WALLY configurable RISC-V project.
|
|
//
|
|
// Copyright (C) 2021-23 Harvey Mudd College & Oklahoma State University
|
|
//
|
|
// SPDX-License-Identifier: Apache-2.0 WITH SHL-2.1
|
|
//
|
|
// Licensed under the Solderpad Hardware License v 2.1 (the “License”); you may not use this file
|
|
// except in compliance with the License, or, at your option, the Apache License version 2.0. You
|
|
// may obtain a copy of the License at
|
|
//
|
|
// https://solderpad.org/licenses/SHL-2.1/
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, any work distributed under the
|
|
// License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
|
|
// either express or implied. See the License for the specific language governing permissions
|
|
// and limitations under the License.
|
|
////////////////////////////////////////////////////////////////////////////////////////////////
|
|
|
|
`include "wally-config.vh"
|
|
|
|
module shifter (
|
|
input logic [`XLEN:0] shA, // shift Source
|
|
input logic [`XLEN-1:0] rotA, // rotate source
|
|
input logic [`LOG_XLEN-1:0] Amt, // Shift amount
|
|
input logic Right, Rotate, W64, // Shift right, rotate signals
|
|
output logic [`XLEN-1:0] Y); // Shifted result
|
|
|
|
logic [2*`XLEN-2:0] z, zshift; // Input to funnel shifter, shifted amount before truncated to 32 or 64 bits
|
|
logic [`LOG_XLEN-1:0] amttrunc, offset; // Shift amount adjusted for RV64, right-shift amount
|
|
|
|
|
|
if (`ZBB_SUPPORTED) begin: rotfunnel
|
|
if (`XLEN==32) begin // rv32 with rotates
|
|
always_comb // funnel mux
|
|
case({Right, Rotate})
|
|
2'b00: z = {shA[31:0], 31'b0};
|
|
2'b01: z = {rotA,rotA[31:1]};
|
|
2'b10: z = {{31{shA[32]}}, shA[31:0]};
|
|
2'b11: z = {rotA[30:0],rotA};
|
|
endcase
|
|
assign amttrunc = Amt; // shift amount
|
|
end else begin // rv64 with rotates
|
|
always_comb // funnel mux
|
|
case ({Right, Rotate})
|
|
2'b00: z = {shA[63:0],{63'b0}};
|
|
2'b01: z = {rotA, rotA[63:1]};
|
|
2'b10: z = {{63{shA[64]}},shA[63:0]};
|
|
2'b11: z = {rotA[62:0],rotA[63:0]};
|
|
endcase
|
|
assign amttrunc = W64 ? {1'b0, Amt[4:0]} : Amt; // 32- or 64-bit shift
|
|
end
|
|
end else begin: norotfunnel
|
|
if (`XLEN==32) begin:shifter // RV32
|
|
always_comb // funnel mux
|
|
if (Right) z = {{31{shA[32]}}, shA[31:0]};
|
|
else z = {shA[31:0], 31'b0};
|
|
assign amttrunc = Amt; // shift amount
|
|
end else begin:shifter // RV64
|
|
always_comb // funnel mux
|
|
if (Right) z = {{63{shA[64]}},shA[63:0]};
|
|
else z = {shA[63:0],{63'b0}};
|
|
assign amttrunc = W64 ? {1'b0, Amt[4:0]} : Amt; // 32- or 64-bit shift
|
|
end
|
|
end
|
|
|
|
// Opposite offset for right shifts
|
|
assign offset = Right ? amttrunc : ~amttrunc;
|
|
|
|
// Funnel operation
|
|
assign zshift = z >> offset;
|
|
assign Y = zshift[`XLEN-1:0];
|
|
endmodule
|
|
|
|
|