mirror of
https://github.com/openhwgroup/cvw
synced 2025-02-11 06:05:49 +00:00
74 lines
7.3 KiB
Systemverilog
74 lines
7.3 KiB
Systemverilog
///////////////////////////////////////////
|
|
// riscvassertions.sv
|
|
//
|
|
// A component of the Wally configurable RISC-V project.
|
|
//
|
|
// Copyright (C) 2021 Harvey Mudd College & Oklahoma State University
|
|
//
|
|
// SPDX-License-Identifier: Apache-2.0 WITH SHL-2.1
|
|
//
|
|
// Licensed under the Solderpad Hardware License v 2.1 (the “License”); you may not use this file
|
|
// except in compliance with the License, or, at your option, the Apache License version 2.0. You
|
|
// may obtain a copy of the License at
|
|
//
|
|
// https://solderpad.org/licenses/SHL-2.1/
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, any work distributed under the
|
|
// License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
|
|
// either express or implied. See the License for the specific language governing permissions
|
|
// and limitations under the License.
|
|
////////////////////////////////////////////////////////////////////////////////////////////////
|
|
|
|
module riscvassertions import cvw::*; #(parameter cvw_t P);
|
|
initial begin
|
|
assert (P.PMP_ENTRIES == 0 || P.PMP_ENTRIES==16 || P.PMP_ENTRIES==64) else $fatal(1, "Illegal number of PMP entries: PMP_ENTRIES must be 0, 16, or 64");
|
|
assert (P.S_SUPPORTED || P.VIRTMEM_SUPPORTED == 0) else $fatal(1, "Virtual memory requires S mode support");
|
|
assert (P.IDIV_BITSPERCYCLE == 1 || P.IDIV_BITSPERCYCLE==2 || P.IDIV_BITSPERCYCLE==4) else $fatal(1, "Illegal number of divider bits/cycle: IDIV_BITSPERCYCLE must be 1, 2, or 4");
|
|
assert (P.F_SUPPORTED || ~P.D_SUPPORTED) else $fatal(1, "Can't support double fp (D) without supporting float (F)");
|
|
assert (P.D_SUPPORTED || ~P.Q_SUPPORTED) else $fatal(1, "Can't support quad fp (Q) without supporting double (D)");
|
|
assert (P.F_SUPPORTED || ~P.ZFH_SUPPORTED) else $fatal(1, "Can't support half-precision fp (ZFH) without supporting float (F)");
|
|
assert (P.DCACHE_SUPPORTED || ~P.F_SUPPORTED || P.FLEN <= P.XLEN) else $fatal(1, "Data cache required to support FLEN > XLEN because AHB/DTIM bus width is XLEN");
|
|
assert (P.I_SUPPORTED ^ P.E_SUPPORTED) else $fatal(1, "Exactly one of I and E must be supported");
|
|
assert (P.DCACHE_WAYSIZEINBYTES <= 4096 || (!P.DCACHE_SUPPORTED) || P.VIRTMEM_SUPPORTED == 0) else $fatal(1, "DCACHE_WAYSIZEINBYTES cannot exceed 4 KiB when caches and vitual memory is enabled (to prevent aliasing)");
|
|
assert (P.DCACHE_LINELENINBITS >= 128 || (!P.DCACHE_SUPPORTED)) else $fatal(1, "DCACHE_LINELENINBITS must be at least 128 when caches are enabled");
|
|
assert (P.DCACHE_LINELENINBITS < P.DCACHE_WAYSIZEINBYTES*8) else $fatal(1, "DCACHE_LINELENINBITS must be smaller than way size");
|
|
assert (P.ICACHE_WAYSIZEINBYTES <= 4096 || (!P.ICACHE_SUPPORTED) || P.VIRTMEM_SUPPORTED == 0) else $fatal(1, "ICACHE_WAYSIZEINBYTES cannot exceed 4 KiB when caches and vitual memory is enabled (to prevent aliasing)");
|
|
assert (P.ICACHE_LINELENINBITS >= 32 || (!P.ICACHE_SUPPORTED)) else $fatal(1, "ICACHE_LINELENINBITS must be at least 32 when caches are enabled");
|
|
assert (P.ICACHE_LINELENINBITS < P.ICACHE_WAYSIZEINBYTES*8) else $fatal(1, "ICACHE_LINELENINBITS must be smaller than way size");
|
|
assert (2**$clog2(P.DCACHE_LINELENINBITS) == P.DCACHE_LINELENINBITS || (!P.DCACHE_SUPPORTED)) else $fatal(1, "DCACHE_LINELENINBITS must be a power of 2");
|
|
assert (2**$clog2(P.DCACHE_WAYSIZEINBYTES) == P.DCACHE_WAYSIZEINBYTES || (!P.DCACHE_SUPPORTED)) else $fatal(1, "DCACHE_WAYSIZEINBYTES must be a power of 2");
|
|
assert (2**$clog2(P.ICACHE_LINELENINBITS) == P.ICACHE_LINELENINBITS || (!P.ICACHE_SUPPORTED)) else $fatal(1, "ICACHE_LINELENINBITS must be a power of 2");
|
|
assert (2**$clog2(P.ICACHE_WAYSIZEINBYTES) == P.ICACHE_WAYSIZEINBYTES || (!P.ICACHE_SUPPORTED)) else $fatal(1, "ICACHE_WAYSIZEINBYTES must be a power of 2");
|
|
assert (2**$clog2(P.ITLB_ENTRIES) == P.ITLB_ENTRIES || P.VIRTMEM_SUPPORTED==0) else $fatal(1, "ITLB_ENTRIES must be a power of 2");
|
|
assert (2**$clog2(P.DTLB_ENTRIES) == P.DTLB_ENTRIES || P.VIRTMEM_SUPPORTED==0) else $fatal(1, "DTLB_ENTRIES must be a power of 2");
|
|
assert (P.UNCORE_RAM_RANGE >= 64'h07FFFFFF) else $warning("Some regression tests will fail if UNCORE_RAM_RANGE is less than 64'h07FFFFFF");
|
|
assert (P.ZICSR_SUPPORTED == 1 || (P.PMP_ENTRIES == 0 && P.VIRTMEM_SUPPORTED == 0)) else $fatal(1, "PMP_ENTRIES and VIRTMEM_SUPPORTED must be zero if ZICSR not supported.");
|
|
assert (P.ZICSR_SUPPORTED == 1 || (P.S_SUPPORTED == 0 && P.U_SUPPORTED == 0)) else $fatal(1, "S and U modes not supported if ZICSR not supported");
|
|
assert (P.U_SUPPORTED || (P.S_SUPPORTED == 0)) else $error ("S mode only supported if U also is supported");
|
|
assert (P.VIRTMEM_SUPPORTED == 0 || (P.DTIM_SUPPORTED == 0 && P.IROM_SUPPORTED == 0)) else $fatal(1, "Can't simultaneously have virtual memory and DTIM_SUPPORTED/IROM_SUPPORTED because local memories don't translate addresses");
|
|
assert (P.DCACHE_SUPPORTED || P.VIRTMEM_SUPPORTED ==0) else $fatal(1, "Virtual memory needs dcache");
|
|
assert (P.ICACHE_SUPPORTED || P.VIRTMEM_SUPPORTED ==0) else $fatal(1, "Virtual memory needs icache");
|
|
assert ((P.DCACHE_SUPPORTED == 0 && P.ICACHE_SUPPORTED == 0) || P.BUS_SUPPORTED) else $fatal(1, "Dcache and Icache requires DBUS_SUPPORTED.");
|
|
assert (P.DCACHE_LINELENINBITS <= P.XLEN*16 || (!P.DCACHE_SUPPORTED)) else $fatal(1, "DCACHE_LINELENINBITS must not exceed 16 words because max AHB burst size is 16");
|
|
assert (P.DCACHE_LINELENINBITS % 4 == 0) else $fatal(1, "DCACHE_LINELENINBITS must hold 4, 8, or 16 words");
|
|
assert (P.DCACHE_SUPPORTED || (P.A_SUPPORTED == 0)) else $fatal(1, "Atomic extension (A) requires cache on Wally.");
|
|
assert (P.IDIV_ON_FPU == 0 || P.F_SUPPORTED) else $fatal(1, "IDIV on FPU needs F_SUPPORTED");
|
|
assert (P.SSTC_SUPPORTED == 0 || (P.S_SUPPORTED)) else $fatal(1, "SSTC requires S_SUPPORTED");
|
|
assert ((P.ZMMUL_SUPPORTED == 0) || (P.M_SUPPORTED ==0)) else $fatal(1, "At most one of ZMMUL_SUPPORTED and M_SUPPORTED can be enabled");
|
|
assert ((P.ZICNTR_SUPPORTED == 0) || (P.ZICSR_SUPPORTED == 1)) else $fatal(1, "ZICNTR_SUPPORTED requires ZICSR_SUPPORTED");
|
|
assert ((P.ZIHPM_SUPPORTED == 0) || (P.ZICNTR_SUPPORTED == 1)) else $fatal(1, "ZIPHM_SUPPORTED requires ZICNTR_SUPPORTED");
|
|
assert ((P.ZICBOM_SUPPORTED == 0) || (P.DCACHE_SUPPORTED == 1)) else $fatal(1, "ZICBOM requires DCACHE_SUPPORTED");
|
|
assert ((P.ZICBOZ_SUPPORTED == 0) || (P.DCACHE_SUPPORTED == 1)) else $fatal(1, "ZICBOZ requires DCACHE_SUPPORTED");
|
|
assert ((P.SVPBMT_SUPPORTED == 0) || (P.VIRTMEM_SUPPORTED == 1 && P.XLEN==64)) else $fatal(1, "SVPBMT requires VIRTMEM_SUPPORTED and RV64");
|
|
assert ((P.SVNAPOT_SUPPORTED == 0) || (P.VIRTMEM_SUPPORTED == 1 && P.XLEN==64)) else $fatal(1, "SVNAPOT requires VIRTMEM_SUPPORTED and RV64");
|
|
assert ((P.ZCB_SUPPORTED == 0) || (P.M_SUPPORTED == 1 && (P.ZBA_SUPPORTED == 1 || P.XLEN == 32) && P.ZBB_SUPPORTED == 1)) else $fatal(1, "ZCB requires M and ZBB (and also ZBA for RV64)");
|
|
assert ((P.C_SUPPORTED == 0) || (P.ZCA_SUPPORTED == 0 && P.ZCF_SUPPORTED == 0 && P.ZCD_SUPPORTED == 0)) else $fatal(1, "C and ZCA/ZCD/ZCF cannot simultaneously be supported");
|
|
assert ((P.ZCA_SUPPORTED == 1) || (P.ZCD_SUPPORTED == 0 && P.ZCF_SUPPORTED == 0)) else $fatal(1, "ZCF or ZCD requires ZCA");
|
|
assert ((P.ZCF_SUPPORTED == 0) || (P.F_SUPPORTED == 1)) else $fatal(1, "ZCF requires F");
|
|
assert ((P.ZCD_SUPPORTED == 0) || (P.D_SUPPORTED == 1)) else $fatal(1, "ZCD requires D");
|
|
end
|
|
|
|
endmodule
|
|
|
|
|