///////////////////////////////////////////
// wallywrapper.sv
//
// Written: David_Harris@hmc.edu 9 January 2021
// Modified: 
//
// Purpose: Wrapper module to define parameters for Wally Verilator linting
// 
// A component of the Wally configurable RISC-V project.
// 
// Copyright (C) 2021 Harvey Mudd College & Oklahoma State University
//
// SPDX-License-Identifier: Apache-2.0 WITH SHL-2.1
//
// Licensed under the Solderpad Hardware License v 2.1 (the “License”); you may not use this file 
// except in compliance with the License, or, at your option, the Apache License version 2.0. You 
// may obtain a copy of the License at
//
// https://solderpad.org/licenses/SHL-2.1/
//
// Unless required by applicable law or agreed to in writing, any work distributed under the 
// License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, 
// either express or implied. See the License for the specific language governing permissions 
// and limitations under the License.
////////////////////////////////////////////////////////////////////////////////////////////////

`include "config.vh"



module wallywrapper import cvw::*;(
  input logic clk,
  input logic reset_ext,
  input logic SPIIn,
  input logic SDCIn
);
 
`include "parameter-defs.vh"

  logic        reset;

  logic [P.AHBW-1:0]    HRDATAEXT;
  logic                HREADYEXT, HRESPEXT;
  logic [P.PA_BITS-1:0] HADDR;
  logic [P.AHBW-1:0]    HWDATA;
  logic [P.XLEN/8-1:0]  HWSTRB;
  logic                HWRITE;
  logic [2:0]          HSIZE;
  logic [2:0]          HBURST;
  logic [3:0]          HPROT;
  logic [1:0]          HTRANS;
  logic                HMASTLOCK;
  logic                HCLK, HRESETn;

  logic [31:0] GPIOIN, GPIOOUT, GPIOEN;
  logic        UARTSin, UARTSout;
  logic        SPIOut;
  logic [3:0]  SPICS;
  logic        SPICLK;

  logic        SDCCmd;
  logic [3:0]  SDCCS;
  logic        SDCCLK;

  logic        HREADY;
  logic        HSELEXT;

  logic        ExternalStall;
  
  // instantiate device to be tested
  assign GPIOIN = 0;
  assign UARTSin = 1;

    assign HREADYEXT = 1;
    assign HRESPEXT = 0;
    assign HRDATAEXT = 0;

  assign ExternalStall = '0;

  wallypipelinedsoc  #(P) dut(.clk, .reset_ext, .reset, .ExternalStall, .HRDATAEXT,.HREADYEXT, .HRESPEXT,.HSELEXT,
                        .HCLK, .HRESETn, .HADDR, .HWDATA, .HWSTRB, .HWRITE, .HSIZE, .HBURST, .HPROT,
                        .HTRANS, .HMASTLOCK, .HREADY, .TIMECLK(1'b0), .GPIOIN, .GPIOOUT, .GPIOEN,
                        .UARTSin, .UARTSout, .SPIIn, .SPIOut, .SPICS, .SPICLK, .SDCIn, .SDCCmd, .SDCCS, .SDCCLK); 

endmodule