///////////////////////////////////////////
// mux.sv
//
// Written: David_Harris@hmc.edu 9 January 2021
// Modified: 
//
// Purpose: Various flavors of multiplexers
// 
// A component of the CORE-V-WALLY configurable RISC-V project.
// 
// Copyright (C) 2021-23 Harvey Mudd College & Oklahoma State University
//
// SPDX-License-Identifier: Apache-2.0 WITH SHL-2.1
//
// Licensed under the Solderpad Hardware License v 2.1 (the “License”); you may not use this file 
// except in compliance with the License, or, at your option, the Apache License version 2.0. You 
// may obtain a copy of the License at
//
// https://solderpad.org/licenses/SHL-2.1/
//
// Unless required by applicable law or agreed to in writing, any work distributed under the 
// License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, 
// either express or implied. See the License for the specific language governing permissions 
// and limitations under the License.
////////////////////////////////////////////////////////////////////////////////////////////////

`include "wally-config.vh"
/* verilator lint_off DECLFILENAME */

module mux2 #(parameter WIDTH = 8) (
  input  logic [WIDTH-1:0] d0, d1, 
  input  logic             s, 
  output logic [WIDTH-1:0] y);

  assign y = s ? d1 : d0; 
endmodule

module mux3 #(parameter WIDTH = 8) (
  input  logic [WIDTH-1:0] d0, d1, d2,
  input  logic [1:0]       s, 
  output logic [WIDTH-1:0] y);

  assign y = s[1] ? d2 : (s[0] ? d1 : d0); 
endmodule

module mux4 #(parameter WIDTH = 8) (
  input  logic [WIDTH-1:0] d0, d1, d2, d3,
  input  logic [1:0]       s, 
  output logic [WIDTH-1:0] y);

  assign y = s[1] ? (s[0] ? d3 : d2) : (s[0] ? d1 : d0); 
endmodule

module mux5 #(parameter WIDTH = 8) (
  input  logic [WIDTH-1:0] d0, d1, d2, d3, d4,
  input  logic [2:0]       s, 
  output logic [WIDTH-1:0] y);

  assign y = s[2] ? d4 : (s[1] ? (s[0] ? d3 : d2) : (s[0] ? d1 : d0)); 
endmodule

module mux6 #(parameter WIDTH = 8) (
  input  logic [WIDTH-1:0] d0, d1, d2, d3, d4, d5,
  input  logic [2:0]       s, 
  output logic [WIDTH-1:0] y);

  assign y = s[2] ? (s[0] ? d5 : d4) : (s[1] ? (s[0] ? d3 : d2) : (s[0] ? d1 : d0)); 
endmodule

/* verilator lint_on DECLFILENAME */