# The main clocks are all autogenerated by the Xilinx IP # clk_out3_xlnx_mmcm is the 20Mhz clock from the mmcm used to drive wally and the AHB Bus. # mmcm_clkout0 is the clock output of the DDR3 memory interface / 4. # This clock is not used by wally or the AHB Bus. However it is used by the AXI BUS on the DD3 IP. #create_generated_clock -name CLKDiv64_Gen -source [get_pins wallypipelinedsoc/uncore.uncore/sdc.SDC/sd_top/slow_clk_divider/clkMux/I0] -multiply_by 1 -divide_by 1 [get_pins wallypipelinedsoc/uncore.uncore/sdc.SDC/sd_top/slow_clk_divider/clkMux/O] ##### clock ##### set_property PACKAGE_PIN E3 [get_ports {default_100mhz_clk}] set_property IOSTANDARD LVCMOS33 [get_ports {default_100mhz_clk}] ##### RVVI Ethernet #### # taken from https://github.com/alexforencich/verilog-ethernet/blob/master/example/Arty/fpga/fpga.xdc set_property -dict {LOC F15 IOSTANDARD LVCMOS33} [get_ports phy_rx_clk] set_property -dict {LOC D18 IOSTANDARD LVCMOS33} [get_ports {phy_rxd[0]}] set_property -dict {LOC E17 IOSTANDARD LVCMOS33} [get_ports {phy_rxd[1]}] set_property -dict {LOC E18 IOSTANDARD LVCMOS33} [get_ports {phy_rxd[2]}] set_property -dict {LOC G17 IOSTANDARD LVCMOS33} [get_ports {phy_rxd[3]}] set_property -dict {LOC G16 IOSTANDARD LVCMOS33} [get_ports phy_rx_dv] set_property -dict {LOC C17 IOSTANDARD LVCMOS33} [get_ports phy_rx_er] set_property -dict {LOC H16 IOSTANDARD LVCMOS33} [get_ports phy_tx_clk] set_property -dict {LOC H14 IOSTANDARD LVCMOS33 SLEW FAST DRIVE 12} [get_ports {phy_txd[0]}] set_property -dict {LOC J14 IOSTANDARD LVCMOS33 SLEW FAST DRIVE 12} [get_ports {phy_txd[1]}] set_property -dict {LOC J13 IOSTANDARD LVCMOS33 SLEW FAST DRIVE 12} [get_ports {phy_txd[2]}] set_property -dict {LOC H17 IOSTANDARD LVCMOS33 SLEW FAST DRIVE 12} [get_ports {phy_txd[3]}] set_property -dict {LOC H15 IOSTANDARD LVCMOS33 SLEW FAST DRIVE 12} [get_ports phy_tx_en] set_property -dict {LOC D17 IOSTANDARD LVCMOS33} [get_ports phy_col] set_property -dict {LOC G14 IOSTANDARD LVCMOS33} [get_ports phy_crs] set_property -dict {LOC G18 IOSTANDARD LVCMOS33 SLEW SLOW DRIVE 12} [get_ports phy_ref_clk] set_property -dict {LOC C16 IOSTANDARD LVCMOS33 SLEW SLOW DRIVE 12} [get_ports phy_reset_n] create_clock -period 40.000 -name phy_rx_clk [get_ports phy_rx_clk] create_clock -period 40.000 -name phy_tx_clk [get_ports phy_tx_clk] set_false_path -to [get_ports {phy_ref_clk phy_reset_n}] set_output_delay 0 [get_ports {phy_ref_clk phy_reset_n}] ##### GPI #### set_property PACKAGE_PIN A8 [get_ports {GPI[0]}] set_property PACKAGE_PIN C9 [get_ports {GPI[1]}] set_property PACKAGE_PIN B9 [get_ports {GPI[2]}] set_property PACKAGE_PIN B8 [get_ports {GPI[3]}] set_property IOSTANDARD LVCMOS33 [get_ports {GPI[3]}] set_property IOSTANDARD LVCMOS33 [get_ports {GPI[2]}] set_property IOSTANDARD LVCMOS33 [get_ports {GPI[1]}] set_property IOSTANDARD LVCMOS33 [get_ports {GPI[0]}] set_input_delay -clock [get_clocks clk_out3_xlnx_mmcm] -min -add_delay 0.000 [get_ports {GPI[*]}] set_input_delay -clock [get_clocks clk_out3_xlnx_mmcm] -max -add_delay 0.000 [get_ports {GPI[*]}] set_max_delay -from [get_ports {GPI[*]}] 20.000 ##### GPO #### set_property PACKAGE_PIN G6 [get_ports {GPO[0]}] set_property PACKAGE_PIN F6 [get_ports {GPO[1]}] set_property PACKAGE_PIN E1 [get_ports {GPO[2]}] set_property PACKAGE_PIN G3 [get_ports {GPO[4]}] set_property PACKAGE_PIN J4 [get_ports {GPO[3]}] set_property IOSTANDARD LVCMOS33 [get_ports {GPO[4]}] set_property IOSTANDARD LVCMOS33 [get_ports {GPO[3]}] set_property IOSTANDARD LVCMOS33 [get_ports {GPO[2]}] set_property IOSTANDARD LVCMOS33 [get_ports {GPO[1]}] set_property IOSTANDARD LVCMOS33 [get_ports {GPO[0]}] set_max_delay -to [get_ports {GPO[*]}] 20.000 set_output_delay -clock [get_clocks clk_out3_xlnx_mmcm] -min -add_delay 0.000 [get_ports {GPO[*]}] set_output_delay -clock [get_clocks clk_out3_xlnx_mmcm] -max -add_delay 0.000 [get_ports {GPO[*]}] ##### UART ##### # *** IOSTANDARD is probably wrong set_property PACKAGE_PIN A9 [get_ports UARTSin] set_property PACKAGE_PIN D10 [get_ports UARTSout] set_max_delay -from [get_ports UARTSin] 20.000 set_max_delay -to [get_ports UARTSout] 20.000 set_property IOSTANDARD LVCMOS33 [get_ports UARTSin] set_property IOSTANDARD LVCMOS33 [get_ports UARTSout] set_property DRIVE 4 [get_ports UARTSout] set_input_delay -clock [get_clocks clk_out3_xlnx_mmcm] -min -add_delay 0.000 [get_ports UARTSin] set_input_delay -clock [get_clocks clk_out3_xlnx_mmcm] -max -add_delay 0.000 [get_ports UARTSin] set_output_delay -clock [get_clocks clk_out3_xlnx_mmcm] -min -add_delay 0.000 [get_ports UARTSout] set_output_delay -clock [get_clocks clk_out3_xlnx_mmcm] -max -add_delay 0.000 [get_ports UARTSout] ##### reset ##### #************** reset is inverted set_input_delay -clock [get_clocks clk_out3_xlnx_mmcm] -min -add_delay 2.000 [get_ports resetn] set_input_delay -clock [get_clocks clk_out3_xlnx_mmcm] -max -add_delay 2.000 [get_ports resetn] set_max_delay -from [get_ports resetn] 20.000 set_false_path -from [get_ports resetn] set_property PACKAGE_PIN C2 [get_ports {resetn}] set_property IOSTANDARD LVCMOS33 [get_ports {resetn}] set_input_delay -clock [get_clocks clk_out3_xlnx_mmcm] -min -add_delay 2.000 [get_ports south_reset] set_input_delay -clock [get_clocks clk_out3_xlnx_mmcm] -max -add_delay 2.000 [get_ports south_reset] set_max_delay -from [get_ports south_reset] 20.000 set_false_path -from [get_ports south_reset] set_property PACKAGE_PIN D9 [get_ports {south_reset}] set_property IOSTANDARD LVCMOS33 [get_ports {south_reset}] ##### SD Card I/O ##### #***** may have to switch to Pmod JB or JC. set_property PACKAGE_PIN D4 [get_ports {SDCDat[3]}] set_property PACKAGE_PIN D2 [get_ports {SDCDat[2]}] set_property PACKAGE_PIN E2 [get_ports {SDCDat[1]}] set_property PACKAGE_PIN F4 [get_ports {SDCDat[0]}] set_property PACKAGE_PIN F3 [get_ports SDCCLK] set_property PACKAGE_PIN D3 [get_ports {SDCCmd}] set_property PACKAGE_PIN H2 [get_ports {SDCCD}] set_property IOSTANDARD LVCMOS33 [get_ports {SDCDat[3]}] set_property IOSTANDARD LVCMOS33 [get_ports {SDCDat[2]}] set_property IOSTANDARD LVCMOS33 [get_ports {SDCDat[1]}] set_property IOSTANDARD LVCMOS33 [get_ports {SDCDat[0]}] set_property IOSTANDARD LVCMOS33 [get_ports SDCCLK] set_property IOSTANDARD LVCMOS33 [get_ports {SDCCmd}] set_property IOSTANDARD LVCMOS33 [get_ports {SDCCD}] set_property PULLUP true [get_ports {SDCDat[3]}] set_property PULLUP true [get_ports {SDCDat[2]}] set_property PULLUP true [get_ports {SDCDat[1]}] set_property PULLUP true [get_ports {SDCDat[0]}] set_property PULLUP true [get_ports {SDCCmd}] set_property PULLUP true [get_ports {SDCCD}] set_input_delay -clock [get_clocks clk_out3_xlnx_mmcm] -min -add_delay 2.500 [get_ports {SDCDat[*]}] set_input_delay -clock [get_clocks clk_out3_xlnx_mmcm] -max -add_delay 21.000 [get_ports {SDCDat[*]}] set_input_delay -clock [get_clocks clk_out3_xlnx_mmcm] -min -add_delay 2.500 [get_ports {SDCCmd}] set_input_delay -clock [get_clocks clk_out3_xlnx_mmcm] -max -add_delay 14.000 [get_ports {SDCCmd}] set_output_delay -clock [get_clocks clk_out3_xlnx_mmcm] -min -add_delay 2.000 [get_ports {SDCCmd}] set_output_delay -clock [get_clocks clk_out3_xlnx_mmcm] -max -add_delay 6.000 [get_ports {SDCCmd}] set_output_delay -clock [get_clocks clk_out3_xlnx_mmcm] 0.000 [get_ports SDCCLK] #set_multicycle_path -from [get_pins xlnx_ddr3_c0/u_xlnx_ddr3_mig/u_memc_ui_top_axi/mem_intfc0/ddr_phy_top0/u_ddr_calib_top/init_calib_complete_reg/C] -to [get_pins xlnx_proc_sys_reset_0/U0/EXT_LPF/lpf_int_reg/D] 10 set_max_delay -datapath_only -from [get_pins xlnx_ddr3_c0/u_xlnx_ddr3_mig/u_memc_ui_top_axi/mem_intfc0/ddr_phy_top0/u_ddr_calib_top/init_calib_complete_reg/C] -to [get_pins xlnx_proc_sys_reset_0/U0/EXT_LPF/lpf_int_reg/D] 20.000 # ********************************* #set_property DCI_CASCADE {64} [get_iobanks 65] #set_property INTERNAL_VREF 0.9 [get_iobanks 65] # ddr3 set_property IOSTANDARD SSTL135 [get_ports ddr3_dq[0] set_property IOSTANDARD SSTL135 [get_ports ddr3_dq[1] set_property IOSTANDARD SSTL135 [get_ports ddr3_dq[2] set_property IOSTANDARD SSTL135 [get_ports ddr3_dq[3] set_property IOSTANDARD SSTL135 [get_ports ddr3_dq[4] set_property IOSTANDARD SSTL135 [get_ports ddr3_dq[5] set_property IOSTANDARD SSTL135 [get_ports ddr3_dq[6] set_property IOSTANDARD SSTL135 [get_ports ddr3_dq[7] set_property IOSTANDARD SSTL135 [get_ports ddr3_dq[8] set_property IOSTANDARD SSTL135 [get_ports ddr3_dq[9] set_property IOSTANDARD SSTL135 [get_ports ddr3_dq[10] set_property IOSTANDARD SSTL135 [get_ports ddr3_dq[11] set_property IOSTANDARD SSTL135 [get_ports ddr3_dq[12] set_property IOSTANDARD SSTL135 [get_ports ddr3_dq[13] set_property IOSTANDARD SSTL135 [get_ports ddr3_dq[14] set_property IOSTANDARD SSTL135 [get_ports ddr3_dq[15] set_property IOSTANDARD SSTL135 [get_ports ddr3_dm[0] set_property IOSTANDARD SSTL135 [get_ports ddr3_dm[1] set_property IOSTANDARD DIFF [get_ports ddr3_dqs_p[0] set_property IOSTANDARD DIFF [get_ports ddr3_dqs_n[0] set_property IOSTANDARD DIFF [get_ports ddr3_dqs_p[1] set_property IOSTANDARD DIFF [get_ports ddr3_dqs_n[1] set_property IOSTANDARD SSTL135 [get_ports ddr3_addr[13] set_property IOSTANDARD SSTL135 [get_ports ddr3_addr[12] set_property IOSTANDARD SSTL135 [get_ports ddr3_addr[11] set_property IOSTANDARD SSTL135 [get_ports ddr3_addr[10] set_property IOSTANDARD SSTL135 [get_ports ddr3_addr[9] set_property IOSTANDARD SSTL135 [get_ports ddr3_addr[8] set_property IOSTANDARD SSTL135 [get_ports ddr3_addr[7] set_property IOSTANDARD SSTL135 [get_ports ddr3_addr[6] set_property IOSTANDARD SSTL135 [get_ports ddr3_addr[5] set_property IOSTANDARD SSTL135 [get_ports ddr3_addr[4] set_property IOSTANDARD SSTL135 [get_ports ddr3_addr[3] set_property IOSTANDARD SSTL135 [get_ports ddr3_addr[2] set_property IOSTANDARD SSTL135 [get_ports ddr3_addr[1] set_property IOSTANDARD SSTL135 [get_ports ddr3_addr[0] set_property IOSTANDARD SSTL135 [get_ports ddr3_ba[2] set_property IOSTANDARD SSTL135 [get_ports ddr3_ba[1] set_property IOSTANDARD SSTL135 [get_ports ddr3_ba[0] set_property IOSTANDARD DIFF [get_ports ddr3_ck_p[0] set_property IOSTANDARD DIFF [get_ports ddr3_ck_n[0] set_property IOSTANDARD SSTL135 [get_ports ddr3_ras_n set_property IOSTANDARD SSTL135 [get_ports ddr3_cas_n set_property IOSTANDARD SSTL135 [get_ports ddr3_we_n set_property IOSTANDARD SSTL135 [get_ports ddr3_reset_n set_property IOSTANDARD SSTL135 [get_ports ddr3_cke[0] set_property IOSTANDARD SSTL135 [get_ports ddr3_odt[0] set_property IOSTANDARD SSTL135 [get_ports ddr3_cs_n[0] set_properity PACKAGE_PIN K5 [get_ports ddr3_dq[0]] set_properity PACKAGE_PIN L3 [get_ports ddr3_dq[1]] set_properity PACKAGE_PIN K3 [get_ports ddr3_dq[2]] set_properity PACKAGE_PIN L6 [get_ports ddr3_dq[3]] set_properity PACKAGE_PIN M3 [get_ports ddr3_dq[4]] set_properity PACKAGE_PIN M1 [get_ports ddr3_dq[5]] set_properity PACKAGE_PIN L4 [get_ports ddr3_dq[6]] set_properity PACKAGE_PIN M2 [get_ports ddr3_dq[7]] set_properity PACKAGE_PIN V4 [get_ports ddr3_dq[8]] set_properity PACKAGE_PIN T5 [get_ports ddr3_dq[9]] set_properity PACKAGE_PIN U4 [get_ports ddr3_dq[10]] set_properity PACKAGE_PIN V5 [get_ports ddr3_dq[11]] set_properity PACKAGE_PIN V1 [get_ports ddr3_dq[12]] set_properity PACKAGE_PIN T3 [get_ports ddr3_dq[13]] set_properity PACKAGE_PIN U3 [get_ports ddr3_dq[14]] set_properity PACKAGE_PIN R3 [get_ports ddr3_dq[15]] set_properity PACKAGE_PIN L1 [get_ports ddr3_dm[0]] set_properity PACKAGE_PIN U1 [get_ports ddr3_dm[1]] set_properity PACKAGE_PIN N2 [get_ports ddr3_dqs_p[0]] set_properity PACKAGE_PIN N1 [get_ports ddr3_dqs_n[0]] set_properity PACKAGE_PIN U2 [get_ports ddr3_dqs_p[1]] set_properity PACKAGE_PIN V2 [get_ports ddr3_dqs_n[1]] set_properity PACKAGE_PIN T8 [get_ports ddr3_addr[13]] set_properity PACKAGE_PIN T6 [get_ports ddr3_addr[12]] set_properity PACKAGE_PIN U6 [get_ports ddr3_addr[11]] set_properity PACKAGE_PIN R6 [get_ports ddr3_addr[10]] set_properity PACKAGE_PIN V7 [get_ports ddr3_addr[9]] set_properity PACKAGE_PIN R8 [get_ports ddr3_addr[8]] set_properity PACKAGE_PIN U7 [get_ports ddr3_addr[7]] set_properity PACKAGE_PIN V6 [get_ports ddr3_addr[6]] set_properity PACKAGE_PIN R7 [get_ports ddr3_addr[5]] set_properity PACKAGE_PIN N6 [get_ports ddr3_addr[4]] set_properity PACKAGE_PIN T1 [get_ports ddr3_addr[3]] set_properity PACKAGE_PIN N4 [get_ports ddr3_addr[2]] set_properity PACKAGE_PIN M6 [get_ports ddr3_addr[1]] set_properity PACKAGE_PIN R2 [get_ports ddr3_addr[0]] set_properity PACKAGE_PIN P2 [get_ports ddr3_ba[2]] set_properity PACKAGE_PIN P4 [get_ports ddr3_ba[1]] set_properity PACKAGE_PIN R1 [get_ports ddr3_ba[0]] set_properity PACKAGE_PIN U9 [get_ports ddr3_ck_p[0]] set_properity PACKAGE_PIN V9 [get_ports ddr3_ck_n[0]] set_properity PACKAGE_PIN P3 [get_ports ddr3_ras_n] set_properity PACKAGE_PIN M4 [get_ports ddr3_cas_n] set_properity PACKAGE_PIN P5 [get_ports ddr3_we_n] set_properity PACKAGE_PIN K6 [get_ports ddr3_reset_n] set_properity PACKAGE_PIN N5 [get_ports ddr3_cke[0]] set_properity PACKAGE_PIN R5 [get_ports ddr3_odt[0]] set_properity PACKAGE_PIN U8 [get_ports ddr3_cs_n[0]]