///////////////////////////////////////////
//
// Written: me@KatherineParry.com, james.stine@okstate.edu
//
// Purpose: Testbench for UCB Testfloat on Wally
//
// A component of the Wally configurable RISC-V project.
//
// Copyright (C) 2021 Harvey Mudd College & Oklahoma State University
//
// SPDX-License-Identifier: Apache-2.0 WITH SHL-2.1
//
// Licensed under the Solderpad Hardware License v 2.1 (the “License”); you may not use this file
// except in compliance with the License, or, at your option, the Apache License version 2.0. You
// may obtain a copy of the License at
//
// https://solderpad.org/licenses/SHL-2.1/
//
// Unless required by applicable law or agreed to in writing, any work distributed under the
// License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
// either express or implied. See the License for the specific language governing permissions
// and limitations under the License.
////////////////////////////////////////////////////////////////////////////////////////////////
`include "config.vh"
`include "tests_fp.vh"
import cvw::*;
module testbench_fp;
// Two parameters TEST, TEST_SIZE used with testfloat.do in sim dir
// to run specific precisions (e.g., quad or all)
parameter string TEST="none"; // choices are cvtint, cvtfp, cmp, add, sub, mul, div, sqrt, fma; all does not check properly
parameter string TEST_SIZE="all";
`include "parameter-defs.vh"
parameter MAXVECTORS = 8388610;
// FIXME: needs cleaning of unused variables (jes)
string Tests[]; // list of tests to be run
logic [2:0] OpCtrl[]; // list of op controls
logic [2:0] Unit[]; // list of units being tested
logic WriteInt[]; // Is being written to integer resgiter
logic [2:0] Frm[4:0] = {3'b100, 3'b010, 3'b011, 3'b001, 3'b000}; // rounding modes: rne-000, rz-001, ru-011, rd-010, rnm-100
logic [1:0] Fmt[]; // list of formats for the other units
logic clk=0;
logic [31:0] TestNum=0; // index for the test
logic [31:0] OpCtrlNum=0; // index for OpCtrl
logic [31:0] errors=0; // how many errors
logic [31:0] VectorNum=0; // index for test vector
logic [31:0] FrmNum=0; // index for rounding mode
logic [P.Q_LEN*4+7:0] TestVectors[MAXVECTORS-1:0]; // list of test vectors
logic [1:0] FmtVal; // value of the current Fmt
logic [2:0] UnitVal, OpCtrlVal, FrmVal; // value of the currnet Unit/OpCtrl/FrmVal
logic WriteIntVal; // value of the current WriteInt
logic [P.Q_LEN-1:0] X, Y, Z; // inputs read from TestFloat
logic [P.FLEN-1:0] XPostBox; // inputs read from TestFloat
logic [P.XLEN-1:0] SrcA; // integer input
logic [P.Q_LEN-1:0] Ans; // correct answer from TestFloat
logic [P.Q_LEN-1:0] Res; // result from other units
logic [4:0] AnsFlg; // correct flags read from testfloat
logic [4:0] ResFlg, Flg; // Result flags
logic [P.FMTBITS-1:0] ModFmt; // format - 10 = half, 00 = single, 01 = double, 11 = quad
logic [P.FLEN-1:0] FpRes, FpCmpRes; // Results from each unit
logic [P.XLEN-1:0] IntRes, CmpRes; // Results from each unit
logic [P.Q_LEN-1:0] FpResExtended; // FpRes extended to same length as Ans/Res
logic [4:0] FmaFlg, CvtFlg, DivFlg; // Outputed flags
logic [4:0] CmpFlg; // Outputed flags
logic AnsNaN, ResNaN, NaNGood;
logic Xs, Ys, Zs; // sign of the inputs
logic [P.NE-1:0] Xe, Ye, Ze; // exponent of the inputs
logic [P.NF:0] Xm, Ym, Zm; // mantissas of the inputs
logic XNaN, YNaN, ZNaN; // is the input NaN
logic XSNaN, YSNaN, ZSNaN; // is the input a signaling NaN
logic XSubnorm, ZSubnorm; // is the input denormalized
logic XInf, YInf, ZInf; // is the input infinity
logic XZero, YZero, ZZero; // is the input zero
logic XExpMax, YExpMax, ZExpMax; // is the input's exponent all ones
logic [P.CVTLEN-1:0] CvtLzcInE; // input to the Leading Zero Counter (priority encoder)
logic IntZero;
logic CvtResSgnE;
logic [P.NE:0] CvtCalcExpE; // the calculated exponent
logic [P.LOGCVTLEN-1:0] CvtShiftAmtE; // how much to shift by
logic [P.DIVb:0] Quot;
logic CvtResSubnormUfE;
logic DivStart;
logic FDivBusyE;
logic OldFDivBusyE;
logic reset = 1'b0;
logic [$clog2(P.NF+2)-1:0] XZeroCnt, YZeroCnt;
// in-between FMA signals
logic Mult;
logic Ss;
logic [P.NE+1:0] Pe;
logic [P.NE+1:0] Se;
logic ASticky;
logic KillProd;
logic [$clog2(P.FMALEN+1)-1:0] SCnt;
logic [P.FMALEN-1:0] Sm;
logic InvA;
logic NegSum;
logic As;
logic Ps;
logic DivSticky;
logic DivDone;
logic DivNegSticky;
logic [P.NE+1:0] DivCalcExp;
logic divsqrtop;
// Missing logic vectors fdivsqrt
logic [2:0] Funct3E;
logic [2:0] Funct3M;
logic FlushE;
logic IFDivStartE;
logic FDivDoneE;
logic [P.NE+1:0] UeM;
logic [P.DIVb:0] UmM;
logic [P.XLEN-1:0] FIntDivResultM;
logic ResMatch; // Check if result match
logic FlagMatch; // Check if IEEE flags match
logic CheckNow; // Final check
logic FMAop; // Is this a FMA operation?
logic [P.NE-2:0] BiasE; // Bias of exponent
logic [P.LOGFLEN-1:0] NfE; // Number of fractional bits
// FSM for testing each item per clock
typedef enum logic [2:0] {S0, Start, S2, Done} statetype;
statetype state, nextstate;
///////////////////////////////////////////////////////////////////////////////////////////////
// ||||||||| |||||||| ||||||| ||||||||| ||||||| |||||||| |||
// ||| ||| ||| ||| ||| ||| |||
// ||| |||||||| ||||||| ||| ||||||| |||||||| |||
// ||| ||| ||| ||| ||| ||| |||
// ||| |||||||| ||||||| ||| ||||||| |||||||| |||||||||
///////////////////////////////////////////////////////////////////////////////////////////////
// select tests relevent to the specified configuration
// cvtint - test integer conversion unit (fcvtint)
// cvtfp - test floating-point conversion unit (fcvtfp)
// cmp - test comparison unit's LT, LE, EQ opperations (fcmp)
// add - test addition
// sub - test subtraction
// div - test division
// sqrt - test square root
// all - test all of the above < doesn't report errors properly >
initial begin
// Information displayed for user on what is simulating
// $display("\nThe start of simulation...");
// $display("This simulation for TEST is %s", TEST);
// $display("This simulation for TEST is of the operand size of %s", TEST_SIZE);
if (P.Q_SUPPORTED & (TEST_SIZE == "QP" | TEST_SIZE == "all")) begin // if Quad percision is supported
if (TEST === "cvtint" | TEST === "all") begin // if testing integer conversion
// add the 128-bit cvtint tests to the to-be-tested list
Tests = {Tests, f128rv32cvtint};
// add the op-codes for these tests to the op-code list
OpCtrl = {OpCtrl, `FROM_UI_OPCTRL, `FROM_I_OPCTRL, `TO_UI_OPCTRL, `TO_I_OPCTRL};
WriteInt = {WriteInt, 1'b0, 1'b0, 1'b1, 1'b1};
// add what unit is used and the fmt to their lists (one for each test)
for(int i = 0; i<20; i++) begin
Unit = {Unit, `CVTINTUNIT};
Fmt = {Fmt, 2'b11};
end
if (P.XLEN == 64) begin // if 64-bit integers are supported add their conversions
Tests = {Tests, f128rv64cvtint};
// add the op-codes for these tests to the op-code list
OpCtrl = {OpCtrl, `FROM_UL_OPCTRL, `FROM_L_OPCTRL, `TO_UL_OPCTRL, `TO_L_OPCTRL};
WriteInt = {WriteInt, 1'b0, 1'b0, 1'b1, 1'b1};
// add what unit is used and the fmt to their lists (one for each test)
for(int i = 0; i<20; i++) begin
Unit = {Unit, `CVTINTUNIT};
Fmt = {Fmt, 2'b11};
end
end
end
// if the floating-point conversions are being tested
if (TEST === "cvtfp" | TEST === "all") begin
if (P.D_SUPPORTED) begin // if double precision is supported
// add the 128 <-> 64 bit conversions to the to-be-tested list
Tests = {Tests, f128f64cvt};
// add the op-ctrls (i.e. the format of the result)
OpCtrl = {OpCtrl, 3'b01, 3'b11};
WriteInt = {WriteInt, 1'b0, 1'b0};
// add the unit being tested and fmt (input format)
for(int i = 0; i<5; i++) begin
Unit = {Unit, `CVTFPUNIT};
Fmt = {Fmt, 2'b11};
end
for(int i = 0; i<5; i++) begin
Unit = {Unit, `CVTFPUNIT};
Fmt = {Fmt, 2'b01};
end
end
if (P.F_SUPPORTED) begin // if single precision is supported
// add the 128 <-> 32 bit conversions to the to-be-tested list
Tests = {Tests, f128f32cvt};
// add the op-ctrls (i.e. the format of the result)
OpCtrl = {OpCtrl, 3'b00, 3'b11};
WriteInt = {WriteInt, 1'b0, 1'b0};
// add the unit being tested and fmt (input format)
for(int i = 0; i<5; i++) begin
Unit = {Unit, `CVTFPUNIT};
Fmt = {Fmt, 2'b11};
end
for(int i = 0; i<5; i++) begin
Unit = {Unit, `CVTFPUNIT};
Fmt = {Fmt, 2'b00};
end
end
if (P.ZFH_SUPPORTED) begin // if half precision is supported
// add the 128 <-> 16 bit conversions to the to-be-tested list
Tests = {Tests, f128f16cvt};
// add the op-ctrls (i.e. the format of the result)
OpCtrl = {OpCtrl, 3'b10, 3'b11};
WriteInt = {WriteInt, 1'b0, 1'b0};
// add the unit being tested and fmt (input format)
for(int i = 0; i<5; i++) begin
Unit = {Unit, `CVTFPUNIT};
Fmt = {Fmt, 2'b11};
end
for(int i = 0; i<5; i++) begin
Unit = {Unit, `CVTFPUNIT};
Fmt = {Fmt, 2'b10};
end
end
end
if (TEST === "cmp" | TEST === "all") begin// if comparisons are being tested
// add the compare tests/op-ctrls/unit/fmt
Tests = {Tests, f128cmp};
OpCtrl = {OpCtrl, `EQ_OPCTRL, `LE_OPCTRL, `LT_OPCTRL};
WriteInt = {WriteInt, 1'b0, 1'b0, 1'b0};
for(int i = 0; i<15; i++) begin
Unit = {Unit, `CMPUNIT};
Fmt = {Fmt, 2'b11};
end
end
if (TEST === "add" | TEST === "all") begin // if addition is being tested
// add the addition tests/op-ctrls/unit/fmt
Tests = {Tests, f128add};
OpCtrl = {OpCtrl, `ADD_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `FMAUNIT};
Fmt = {Fmt, 2'b11};
end
end
if (TEST === "sub" | TEST === "all") begin // if subtraction is being tested
// add the subtraction tests/op-ctrls/unit/fmt
Tests = {Tests, f128sub};
OpCtrl = {OpCtrl, `SUB_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `FMAUNIT};
Fmt = {Fmt, 2'b11};
end
end
if (TEST === "mul" | TEST === "all") begin // if multiplication is being tested
// add the multiply tests/op-ctrls/unit/fmt
Tests = {Tests, f128mul};
OpCtrl = {OpCtrl, `MUL_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `FMAUNIT};
Fmt = {Fmt, 2'b11};
end
end
if (TEST === "div" | TEST === "all") begin // if division is being tested
// add the divide tests/op-ctrls/unit/fmt
Tests = {Tests, f128div};
OpCtrl = {OpCtrl, `DIV_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `DIVUNIT};
Fmt = {Fmt, 2'b11};
end
end
if (TEST === "sqrt" | TEST === "all") begin // if square-root is being tested
// add the square-root tests/op-ctrls/unit/fmt
Tests = {Tests, f128sqrt};
OpCtrl = {OpCtrl, `SQRT_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `DIVUNIT};
Fmt = {Fmt, 2'b11};
end
end
if (TEST === "fma" | TEST === "all") begin // if fused-mutliply-add is being tested
Tests = {Tests, f128fma};
OpCtrl = {OpCtrl, `FMA_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `FMAUNIT};
Fmt = {Fmt, 2'b11};
end
end
end
if (P.D_SUPPORTED & (TEST_SIZE == "DP" | TEST_SIZE == "all")) begin // if double precision is supported
if (TEST === "cvtint" | TEST === "all") begin // if integer conversion is being tested
Tests = {Tests, f64rv32cvtint};
// add the op-codes for these tests to the op-code list
OpCtrl = {OpCtrl, `FROM_UI_OPCTRL, `FROM_I_OPCTRL, `TO_UI_OPCTRL, `TO_I_OPCTRL};
WriteInt = {WriteInt, 1'b0, 1'b0, 1'b1, 1'b1};
// add what unit is used and the fmt to their lists (one for each test)
for(int i = 0; i<20; i++) begin
Unit = {Unit, `CVTINTUNIT};
Fmt = {Fmt, 2'b01};
end
if (P.XLEN == 64) begin // if 64-bit integers are being supported
Tests = {Tests, f64rv64cvtint};
// add the op-codes for these tests to the op-code list
OpCtrl = {OpCtrl, `FROM_UL_OPCTRL, `FROM_L_OPCTRL, `TO_UL_OPCTRL, `TO_L_OPCTRL};
WriteInt = {WriteInt, 1'b0, 1'b0, 1'b1, 1'b1};
// add what unit is used and the fmt to their lists (one for each test)
for(int i = 0; i<20; i++) begin
Unit = {Unit, `CVTINTUNIT};
Fmt = {Fmt, 2'b01};
end
end
end
if (TEST === "cvtfp" | TEST === "all") begin // if floating point conversions are being tested
if (P.F_SUPPORTED) begin // if single precision is supported
// add the 64 <-> 32 bit conversions to the to-be-tested list
Tests = {Tests, f64f32cvt};
// add the op-ctrls (i.e. the format of the result)
OpCtrl = {OpCtrl, 3'b00, 3'b01};
WriteInt = {WriteInt, 1'b0, 1'b0};
// add the unit being tested and fmt (input format)
for(int i = 0; i<5; i++) begin
Unit = {Unit, `CVTFPUNIT};
Fmt = {Fmt, 2'b01};
end
for(int i = 0; i<5; i++) begin
Unit = {Unit, `CVTFPUNIT};
Fmt = {Fmt, 2'b00};
end
end
if (P.ZFH_SUPPORTED) begin // if half precision is supported
// add the 64 <-> 16 bit conversions to the to-be-tested list
Tests = {Tests, f64f16cvt};
// add the op-ctrls (i.e. the format of the result)
OpCtrl = {OpCtrl, 3'b10, 3'b01};
WriteInt = {WriteInt, 1'b0, 1'b0};
// add the unit being tested and fmt (input format)
for(int i = 0; i<5; i++) begin
Unit = {Unit, `CVTFPUNIT};
Fmt = {Fmt, 2'b01};
end
for(int i = 0; i<5; i++) begin
Unit = {Unit, `CVTFPUNIT};
Fmt = {Fmt, 2'b10};
end
end
end
if (TEST === "cmp" | TEST === "all") begin // if comparisions are being tested
// add the correct tests/op-ctrls/unit/fmt to their lists
Tests = {Tests, f64cmp};
OpCtrl = {OpCtrl, `EQ_OPCTRL, `LE_OPCTRL, `LT_OPCTRL};
WriteInt = {WriteInt, 1'b0, 1'b0, 1'b0};
for(int i = 0; i<15; i++) begin
Unit = {Unit, `CMPUNIT};
Fmt = {Fmt, 2'b01};
end
end
if (TEST === "add" | TEST === "all") begin // if addition is being tested
// add the correct tests/op-ctrls/unit/fmt to their lists
Tests = {Tests, f64add};
OpCtrl = {OpCtrl, `ADD_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `FMAUNIT};
Fmt = {Fmt, 2'b01};
end
end
if (TEST === "sub" | TEST === "all") begin // if subtration is being tested
// add the correct tests/op-ctrls/unit/fmt to their lists
Tests = {Tests, f64sub};
OpCtrl = {OpCtrl, `SUB_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `FMAUNIT};
Fmt = {Fmt, 2'b01};
end
end
if (TEST === "mul" | TEST === "all") begin // if multiplication is being tested
// add the correct tests/op-ctrls/unit/fmt to their lists
Tests = {Tests, f64mul};
OpCtrl = {OpCtrl, `MUL_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `FMAUNIT};
Fmt = {Fmt, 2'b01};
end
end
if (TEST === "div" | TEST === "all") begin // if division is being tested
// add the correct tests/op-ctrls/unit/fmt to their lists
Tests = {Tests, f64div};
OpCtrl = {OpCtrl, `DIV_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `DIVUNIT};
Fmt = {Fmt, 2'b01};
end
end
if (TEST === "sqrt" | TEST === "all") begin // if square-root is being tessted
// add the correct tests/op-ctrls/unit/fmt to their lists
Tests = {Tests, f64sqrt};
OpCtrl = {OpCtrl, `SQRT_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `DIVUNIT};
Fmt = {Fmt, 2'b01};
end
end
if (TEST === "fma" | TEST === "all") begin // if the fused multiply add is being tested
Tests = {Tests, f64fma};
OpCtrl = {OpCtrl, `FMA_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `FMAUNIT};
Fmt = {Fmt, 2'b01};
end
end
end
if (P.F_SUPPORTED & (TEST_SIZE == "SP" | TEST_SIZE == "all")) begin // if single precision being supported
if (TEST === "cvtint"| TEST === "all") begin // if integer conversion is being tested
Tests = {Tests, f32rv32cvtint};
// add the op-codes for these tests to the op-code list
OpCtrl = {OpCtrl, `FROM_UI_OPCTRL, `FROM_I_OPCTRL, `TO_UI_OPCTRL, `TO_I_OPCTRL};
WriteInt = {WriteInt, 1'b0, 1'b0, 1'b1, 1'b1};
// add what unit is used and the fmt to their lists (one for each test)
for(int i = 0; i<20; i++) begin
Unit = {Unit, `CVTINTUNIT};
Fmt = {Fmt, 2'b00};
end
if (P.XLEN == 64) begin // if 64-bit integers are supported
Tests = {Tests, f32rv64cvtint};
// add the op-codes for these tests to the op-code list
OpCtrl = {OpCtrl, `FROM_UL_OPCTRL, `FROM_L_OPCTRL, `TO_UL_OPCTRL, `TO_L_OPCTRL};
WriteInt = {WriteInt, 1'b0, 1'b0, 1'b1, 1'b1};
// add what unit is used and the fmt to their lists (one for each test)
for(int i = 0; i<20; i++) begin
Unit = {Unit, `CVTINTUNIT};
Fmt = {Fmt, 2'b00};
end
end
end
if (TEST === "cvtfp" | TEST === "all") begin // if floating point conversion is being tested
if (P.ZFH_SUPPORTED) begin
// add the 32 <-> 16 bit conversions to the to-be-tested list
Tests = {Tests, f32f16cvt};
// add the op-ctrls (i.e. the format of the result)
OpCtrl = {OpCtrl, 3'b10, 3'b00};
WriteInt = {WriteInt, 1'b0, 1'b0};
// add the unit being tested and fmt (input format)
for(int i = 0; i<5; i++) begin
Unit = {Unit, `CVTFPUNIT};
Fmt = {Fmt, 2'b00};
end
for(int i = 0; i<5; i++) begin
Unit = {Unit, `CVTFPUNIT};
Fmt = {Fmt, 2'b10};
end
end
end
if (TEST === "cmp" | TEST === "all") begin // if comparision is being tested
// add the correct tests/op-ctrls/unit/fmt to their lists
Tests = {Tests, f32cmp};
OpCtrl = {OpCtrl, `EQ_OPCTRL, `LE_OPCTRL, `LT_OPCTRL};
WriteInt = {WriteInt, 1'b0, 1'b0, 1'b0};
for(int i = 0; i<15; i++) begin
Unit = {Unit, `CMPUNIT};
Fmt = {Fmt, 2'b00};
end
end
if (TEST === "add" | TEST === "all") begin // if addition is being tested
// add the correct tests/op-ctrls/unit/fmt to their lists
Tests = {Tests, f32add};
OpCtrl = {OpCtrl, `ADD_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `FMAUNIT};
Fmt = {Fmt, 2'b00};
end
end
if (TEST === "sub" | TEST === "all") begin // if subtration is being tested
// add the correct tests/op-ctrls/unit/fmt to their lists
Tests = {Tests, f32sub};
OpCtrl = {OpCtrl, `SUB_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `FMAUNIT};
Fmt = {Fmt, 2'b00};
end
end
if (TEST === "mul" | TEST === "all") begin // if multiply is being tested
// add the correct tests/op-ctrls/unit/fmt to their lists
Tests = {Tests, f32mul};
OpCtrl = {OpCtrl, `MUL_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `FMAUNIT};
Fmt = {Fmt, 2'b00};
end
end
if (TEST === "div" | TEST === "all") begin // if division is being tested
// add the correct tests/op-ctrls/unit/fmt to their lists
Tests = {Tests, f32div};
OpCtrl = {OpCtrl, `DIV_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `DIVUNIT};
Fmt = {Fmt, 2'b00};
end
end
if (TEST === "sqrt" | TEST === "all") begin // if sqrt is being tested
// add the correct tests/op-ctrls/unit/fmt to their lists
Tests = {Tests, f32sqrt};
OpCtrl = {OpCtrl, `SQRT_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `DIVUNIT};
Fmt = {Fmt, 2'b00};
end
end
if (TEST === "fma" | TEST === "all") begin // if fma is being tested
Tests = {Tests, f32fma};
OpCtrl = {OpCtrl, `FMA_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `FMAUNIT};
Fmt = {Fmt, 2'b00};
end
end
end
if (P.ZFH_SUPPORTED & (TEST_SIZE == "HP" | TEST_SIZE == "all")) begin // if half precision supported
if (TEST === "cvtint" | TEST === "all") begin // if in conversions are being tested
Tests = {Tests, f16rv32cvtint};
// add the op-codes for these tests to the op-code list
OpCtrl = {OpCtrl, `FROM_UI_OPCTRL, `FROM_I_OPCTRL, `TO_UI_OPCTRL, `TO_I_OPCTRL};
WriteInt = {WriteInt, 1'b0, 1'b0, 1'b1, 1'b1};
// add what unit is used and the fmt to their lists (one for each test)
for(int i = 0; i<20; i++) begin
Unit = {Unit, `CVTINTUNIT};
Fmt = {Fmt, 2'b10};
end
if (P.XLEN == 64) begin // if 64-bit integers are supported
Tests = {Tests, f16rv64cvtint};
// add the op-codes for these tests to the op-code list
OpCtrl = {OpCtrl, `FROM_UL_OPCTRL, `FROM_L_OPCTRL, `TO_UL_OPCTRL, `TO_L_OPCTRL};
WriteInt = {WriteInt, 1'b0, 1'b0, 1'b1, 1'b1};
// add what unit is used and the fmt to their lists (one for each test)
for(int i = 0; i<20; i++) begin
Unit = {Unit, `CVTINTUNIT};
Fmt = {Fmt, 2'b10};
end
end
end
if (TEST === "cmp" | TEST === "all") begin // if comparisions are being tested
// add the correct tests/op-ctrls/unit/fmt to their lists
Tests = {Tests, f16cmp};
OpCtrl = {OpCtrl, `EQ_OPCTRL, `LE_OPCTRL, `LT_OPCTRL};
WriteInt = {WriteInt, 1'b0, 1'b0, 1'b0};
for(int i = 0; i<15; i++) begin
Unit = {Unit, `CMPUNIT};
Fmt = {Fmt, 2'b10};
end
end
if (TEST === "add" | TEST === "all") begin // if addition is being tested
// add the correct tests/op-ctrls/unit/fmt to their lists
Tests = {Tests, f16add};
OpCtrl = {OpCtrl, `ADD_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `FMAUNIT};
Fmt = {Fmt, 2'b10};
end
end
if (TEST === "sub" | TEST === "all") begin // if subtraction is being tested
// add the correct tests/op-ctrls/unit/fmt to their lists
Tests = {Tests, f16sub};
OpCtrl = {OpCtrl, `SUB_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `FMAUNIT};
Fmt = {Fmt, 2'b10};
end
end
if (TEST === "mul" | TEST === "all") begin // if multiplication is being tested
// add the correct tests/op-ctrls/unit/fmt to their lists
Tests = {Tests, f16mul};
OpCtrl = {OpCtrl, `MUL_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `FMAUNIT};
Fmt = {Fmt, 2'b10};
end
end
if (TEST === "div" | TEST === "all") begin // if division is being tested
// add the correct tests/op-ctrls/unit/fmt to their lists
Tests = {Tests, f16div};
OpCtrl = {OpCtrl, `DIV_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `DIVUNIT};
Fmt = {Fmt, 2'b10};
end
end
if (TEST === "sqrt" | TEST === "all") begin // if sqrt is being tested
// add the correct tests/op-ctrls/unit/fmt to their lists
Tests = {Tests, f16sqrt};
OpCtrl = {OpCtrl, `SQRT_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `DIVUNIT};
Fmt = {Fmt, 2'b10};
end
end
if (TEST === "fma" | TEST === "all") begin // if fma is being tested
Tests = {Tests, f16fma};
OpCtrl = {OpCtrl, `FMA_OPCTRL};
WriteInt = {WriteInt, 1'b0};
for(int i = 0; i<5; i++) begin
Unit = {Unit, `FMAUNIT};
Fmt = {Fmt, 2'b10};
end
end
end
// check if nothing is being tested
if (Tests.size() == 0) begin
$display("TEST %s not supported in this configuration", TEST);
$stop;
end
end
///////////////////////////////////////////////////////////////////////////////////////////////
// ||||||||| |||||||| ||||||||| ||||||| ||||||||| |||||||| ||||||| |||||||||
// ||| ||| ||| ||| ||| || || ||| ||| ||| |||
// |||||||| |||||||| ||||||||| || || ||| |||||||| ||||||| |||
// ||| || ||| ||| ||| || || ||| ||| ||| |||
// ||| ||| |||||||| ||| ||| ||||||| ||| |||||||| ||||||| |||
///////////////////////////////////////////////////////////////////////////////////////////////
// Read the first test
initial begin
//string testname = {`PATH, Tests[TestNum]};
static string pp = `PATH;
string testname;
string tt0;
tt0 = $sformatf("%s", Tests[TestNum]);
testname = {pp, tt0};
//$display("Here you are %s", testname);
$display("\n\nRunning %s vectors ", Tests[TestNum]);
$readmemh(testname, TestVectors);
// set the test index to 0
TestNum = 0;
end
// set the signals for all tests
always_ff @(posedge clk) begin
UnitVal = Unit[TestNum];
FmtVal = Fmt[TestNum];
OpCtrlVal = OpCtrl[OpCtrlNum];
WriteIntVal = WriteInt[OpCtrlNum];
FrmVal = Frm[FrmNum];
end
// modify the format signal if only 2 precisions supported
// - 1 for the larger precision
// - 0 for the smaller precision
always_comb begin
if (P.FMTBITS == 1) ModFmt = {1'b0, FmtVal == P.FMT};
else ModFmt = FmtVal;
end
// extract the inputs (X, Y, Z, SrcA) and the output (Ans, AnsFlg) from the current test vector
readvectors #(P) readvectors (.clk, .Fmt(FmtVal), .ModFmt, .TestVector(TestVectors[VectorNum]),
.VectorNum, .Ans(Ans), .AnsFlg(AnsFlg), .SrcA,
.Xs, .Ys, .Zs, .Unit(UnitVal),
.Xe, .Ye, .Ze, .TestNum, .OpCtrl(OpCtrlVal),
.Xm, .Ym, .Zm,
.XNaN, .YNaN, .ZNaN,
.XSNaN, .YSNaN, .ZSNaN,
.XSubnorm, .ZSubnorm,
.XZero, .YZero, .ZZero,
.XInf, .YInf, .ZInf, .XExpMax,
.X, .Y, .Z, .XPostBox, .NfE, .BiasE);
///////////////////////////////////////////////////////////////////////////////////////////////
// ||||||| ||| ||| |||||||||
// ||| ||| ||| ||| |||
// ||| ||| ||| ||| |||
// ||| ||| ||| ||| |||
// ||||||| ||||||||| |||
///////////////////////////////////////////////////////////////////////////////////////////////
// instantiate devices under test
if (TEST === "fma"| TEST === "mul" | TEST === "add" | TEST === "sub" | TEST === "all") begin : fma
fma #(P) fma(.Xs(Xs), .Ys(Ys), .Zs(Zs),
.Xe(Xe), .Ye(Ye), .Ze(Ze),
.Xm(Xm), .Ym(Ym), .Zm(Zm),
.XZero, .YZero, .ZZero, .Ss, .Se,
.OpCtrl(OpCtrlVal), .Sm, .InvA, .SCnt, .As, .Ps,
.ASticky);
end
postprocess #(P) postprocess(.Xs(Xs), .Ys(Ys), .PostProcSel(UnitVal[1:0]),
.OpCtrl(OpCtrlVal), .DivUm(Quot), .DivUe(DivCalcExp),
.Xm(Xm), .Ym(Ym), .Zm(Zm), .CvtCe(CvtCalcExpE), .DivSticky(DivSticky), .FmaSs(Ss),
.XNaN(XNaN), .YNaN(YNaN), .ZNaN(ZNaN), .CvtResSubnormUf(CvtResSubnormUfE),
.XZero(XZero), .YZero(YZero), .CvtShiftAmt(CvtShiftAmtE),
.XInf(XInf), .YInf(YInf), .ZInf(ZInf), .CvtCs(CvtResSgnE), .ToInt(WriteIntVal),
.XSNaN(XSNaN), .YSNaN(YSNaN), .ZSNaN(ZSNaN), .CvtLzcIn(CvtLzcInE), .IntZero,
.FmaASticky(ASticky), .FmaSe(Se),
.FmaSm(Sm), .FmaSCnt(SCnt), .FmaAs(As), .FmaPs(Ps), .Fmt(ModFmt), .Frm(FrmVal),
.PostProcFlg(Flg), .PostProcRes(FpRes), .FCvtIntRes(IntRes), .Zfa(1'b0));
if (TEST === "cvtfp" | TEST === "cvtint" | TEST === "all") begin : fcvt
fcvt #(P) fcvt (.Xs(Xs), .Xe(Xe), .Xm(Xm), .Int(SrcA), .ToInt(WriteIntVal),
.XZero(XZero), .OpCtrl(OpCtrlVal), .IntZero,
.Fmt(ModFmt), .Ce(CvtCalcExpE), .ShiftAmt(CvtShiftAmtE),
.ResSubnormUf(CvtResSubnormUfE), .Cs(CvtResSgnE), .LzcIn(CvtLzcInE));
end
if (TEST === "cmp" | TEST === "all") begin: fcmp
fcmp #(P) fcmp (.Fmt(ModFmt), .OpCtrl(OpCtrlVal), .Zfa(1'b0), .Xs, .Ys, .Xe, .Ye,
.Xm, .Ym, .XZero, .YZero, .CmpIntRes(CmpRes),
.XNaN, .YNaN, .XSNaN, .YSNaN, .X(X[P.FLEN-1:0]), .Y(Y[P.FLEN-1:0]), .CmpNV(CmpFlg[4]), .CmpFpRes(FpCmpRes));
end
if (TEST === "div" | TEST === "sqrt" | TEST === "all") begin: fdivsqrt
fdivsqrt #(P) fdivsqrt(.clk, .reset, .XsE(Xs), .FmtE(ModFmt), .XmE(Xm), .YmE(Ym),
.XeE(Xe), .YeE(Ye), .SqrtE(OpCtrlVal[0]), .SqrtM(OpCtrlVal[0]),
.XInfE(XInf), .YInfE(YInf), .XZeroE(XZero), .YZeroE(YZero),
.XNaNE(XNaN), .YNaNE(YNaN), .NfE, .BiasE,
.FDivStartE(DivStart), .IDivStartE(1'b0), .W64E(1'b0),
.StallM(1'b0), .DivStickyM(DivSticky), .FDivBusyE, .UeM(DivCalcExp),
.UmM(Quot),
.FlushE(1'b0), .ForwardedSrcAE('0), .ForwardedSrcBE('0), .Funct3M(Funct3M),
.Funct3E(Funct3E), .IntDivE(1'b0), .FIntDivResultM(FIntDivResultM),
.FDivDoneE(FDivDoneE), .IFDivStartE(IFDivStartE));
end
assign CmpFlg[3:0] = 0;
// produce clock
always begin
clk = 1; #5; clk = 0; #5;
end
///////////////////////////////////////////////////////////////////////////////////////////////
// ||||| ||| |||||||||| ||||| |||
// ||||||| ||| ||| ||| ||||||| |||
// |||| ||| ||| |||||||||| |||| ||| |||
// |||| ||| ||| ||| ||| |||| ||| |||
// |||| ||| ||| ||| ||| |||| ||| |||
// |||| |||||| ||| ||| |||| ||||||
///////////////////////////////////////////////////////////////////////////////////////////////
// Check if the correct answer and result is a NaN
always_comb begin
if (UnitVal === `CVTINTUNIT | UnitVal === `CMPUNIT) begin
// an integer output can't be a NaN
AnsNaN = 1'b0;
ResNaN = 1'b0;
end
else if (UnitVal === `CVTFPUNIT) begin
case (OpCtrlVal[1:0])
2'b11: begin // quad
AnsNaN = &Ans[P.Q_LEN-2:P.NF]&(|Ans[P.Q_NF-1:0]);
ResNaN = &Res[P.Q_LEN-2:P.NF]&(|Res[P.Q_NF-1:0]);
end
2'b01: begin // double
AnsNaN = &Ans[P.D_LEN-2:P.D_NF]&(|Ans[P.D_NF-1:0]);
ResNaN = &Res[P.D_LEN-2:P.D_NF]&(|Res[P.D_NF-1:0]);
end
2'b00: begin // single
AnsNaN = &Ans[P.S_LEN-2:P.S_NF]&(|Ans[P.S_NF-1:0]);
ResNaN = &Res[P.S_LEN-2:P.S_NF]&(|Res[P.S_NF-1:0]);
end
2'b10: begin // half
AnsNaN = &Ans[P.H_LEN-2:P.H_NF]&(|Ans[P.H_NF-1:0]);
ResNaN = &Res[P.H_LEN-2:P.H_NF]&(|Res[P.H_NF-1:0]);
end
endcase
end
else begin
case (FmtVal)
2'b11: begin // quad
AnsNaN = &Ans[P.Q_LEN-2:P.Q_NF]&(|Ans[P.Q_NF-1:0]);
ResNaN = &Res[P.Q_LEN-2:P.Q_NF]&(|Res[P.Q_NF-1:0]);
end
2'b01: begin // double
AnsNaN = &Ans[P.D_LEN-2:P.D_NF]&(|Ans[P.D_NF-1:0]);
ResNaN = &Res[P.D_LEN-2:P.D_NF]&(|Res[P.D_NF-1:0]);
end
2'b00: begin // single
AnsNaN = &Ans[P.S_LEN-2:P.S_NF]&(|Ans[P.S_NF-1:0]);
ResNaN = &Res[P.S_LEN-2:P.S_NF]&(|Res[P.S_NF-1:0]);
end
2'b10: begin // half
AnsNaN = &Ans[P.H_LEN-2:P.H_NF]&(|Ans[P.H_NF-1:0]);
ResNaN = &Res[P.H_LEN-2:P.H_NF]&(|Res[P.H_NF-1:0]);
end
endcase
end
end
always_comb begin
FpResExtended = {{(P.Q_LEN-P.FLEN){1'b1}}, FpRes};
// select the result to check
case (UnitVal)
`FMAUNIT: Res = FpResExtended;
`DIVUNIT: Res = FpResExtended;
`CMPUNIT: Res = {{(Q_LEN-XLEN){1'b0}}, CmpRes};
`CVTINTUNIT: if (WriteIntVal) Res = {{(Q_LEN-XLEN){1'b0}}, IntRes}; else Res = FpResExtended;
`CVTFPUNIT: Res = FpResExtended;
endcase
// select the flag to check
case (UnitVal)
`FMAUNIT: ResFlg = Flg;
`DIVUNIT: ResFlg = Flg;
`CMPUNIT: ResFlg = CmpFlg;
`CVTINTUNIT: ResFlg = Flg;
`CVTFPUNIT: ResFlg = Flg;
endcase
// Use four state test sequence to handle div properly.
// Four states should allow other operations to finish
// properly and within time.
case (state)
S0: begin
DivStart = 1'b0;
nextstate = Start;
end
Start: begin
if (UnitVal == `DIVUNIT)
DivStart = 1'b1;
else
DivStart = 1'b0;
nextstate = S2;
end
S2: begin
DivStart = 1'b0;
if ((FDivBusyE|~DivDone)&(UnitVal == `DIVUNIT))
nextstate = S2;
else
nextstate = Done;
end
Done: begin
DivStart = 1'b0;
nextstate = S0;
end
default: begin
DivStart = 1'b0;
nextstate = S0;
end
endcase // case (state)
end
// Provide reset for divsqrt to reset state
initial
begin
#0 reset = 1'b1;
#25 reset = 1'b0;
end
// Left-over from before - will remove soon
always @(posedge clk)
OldFDivBusyE = FDivDoneE;
// state machine to handle timing for testing due
// various cycle counts for different fp/int operations
// Adds vector at start of clock
always @(posedge clk) begin
// state machine element for testing
if (reset)
state <= S0;
else
state <= nextstate;
// Increment the vector when Done with each test
if (state == Done)
VectorNum += 1; // increment the vector
end
// check results on falling edge of clk
always @(negedge clk) begin
// check if the NaN value is good. IEEE754-2019 sections 6.3 and 6.2.3 specify:
// - the sign of the NaN does not matter for the opperations being tested
// - when 2 or more NaNs are inputed the NaN that is propigated doesn't matter
if (UnitVal !== `CVTFPUNIT & UnitVal !== `CVTINTUNIT)
case (FmtVal)
2'b11: NaNGood = (((P.IEEE754==0)&AnsNaN&(Res === {1'b0, {P.Q_NE+1{1'b1}}, {P.Q_NF-1{1'b0}}})) |
(AnsFlg[4]&(Res[P.Q_LEN-2:0] === {{P.Q_NE+1{1'b1}}, {P.Q_NF-1{1'b0}}})) |
(XNaN&(Res[P.Q_LEN-2:0] === {X[P.Q_LEN-2:P.Q_NF],1'b1,X[P.Q_NF-2:0]})) |
(YNaN&(Res[P.Q_LEN-2:0] === {Y[P.Q_LEN-2:P.Q_NF],1'b1,Y[P.Q_NF-2:0]})) |
(ZNaN&(Res[P.Q_LEN-2:0] === {Z[P.Q_LEN-2:P.Q_NF],1'b1,Z[P.Q_NF-2:0]})));
2'b01: NaNGood = (((P.IEEE754==0)&AnsNaN&(Res[P.D_LEN-1:0] === {1'b0, {P.D_NE+1{1'b1}}, {P.D_NF-1{1'b0}}})) |
(AnsFlg[4]&(Res[P.D_LEN-2:0] === {{P.D_NE+1{1'b1}}, {P.D_NF-1{1'b0}}})) |
(XNaN&(Res[P.D_LEN-2:0] === {X[P.D_LEN-2:P.D_NF],1'b1,X[P.D_NF-2:0]})) |
(YNaN&(Res[P.D_LEN-2:0] === {Y[P.D_LEN-2:P.D_NF],1'b1,Y[P.D_NF-2:0]})) |
(ZNaN&(Res[P.D_LEN-2:0] === {Z[P.D_LEN-2:P.D_NF],1'b1,Z[P.D_NF-2:0]})));
2'b00: NaNGood = (((P.IEEE754==0)&AnsNaN&(Res[P.S_LEN-1:0] === {1'b0, {P.S_NE+1{1'b1}}, {P.S_NF-1{1'b0}}})) |
(AnsFlg[4]&(Res[P.S_LEN-2:0] === {{P.S_NE+1{1'b1}}, {P.S_NF-1{1'b0}}})) |
(XNaN&(Res[P.S_LEN-2:0] === {X[P.S_LEN-2:P.S_NF],1'b1,X[P.S_NF-2:0]})) |
(YNaN&(Res[P.S_LEN-2:0] === {Y[P.S_LEN-2:P.S_NF],1'b1,Y[P.S_NF-2:0]})) |
(ZNaN&(Res[P.S_LEN-2:0] === {Z[P.S_LEN-2:P.S_NF],1'b1,Z[P.S_NF-2:0]})));
2'b10: NaNGood = (((P.IEEE754==0)&AnsNaN&(Res[P.H_LEN-1:0] === {1'b0, {P.H_NE+1{1'b1}}, {P.H_NF-1{1'b0}}})) |
(AnsFlg[4]&(Res[P.H_LEN-2:0] === {{P.H_NE+1{1'b1}}, {P.H_NF-1{1'b0}}})) |
(XNaN&(Res[P.H_LEN-2:0] === {X[P.H_LEN-2:P.H_NF],1'b1,X[P.H_NF-2:0]})) |
(YNaN&(Res[P.H_LEN-2:0] === {Y[P.H_LEN-2:P.H_NF],1'b1,Y[P.H_NF-2:0]})) |
(ZNaN&(Res[P.H_LEN-2:0] === {Z[P.H_LEN-2:P.H_NF],1'b1,Z[P.H_NF-2:0]})));
endcase
else if (UnitVal === `CVTFPUNIT) // if converting from FP to FP OpCtrl contains the final FP format
case (OpCtrlVal[1:0])
2'b11: NaNGood = (((P.IEEE754==0)&AnsNaN&(Res === {1'b0, {P.Q_NE+1{1'b1}}, {P.Q_NF-1{1'b0}}})) |
(AnsFlg[4]&(Res[P.Q_LEN-2:0] === {{P.Q_NE+1{1'b1}}, {P.Q_NF-1{1'b0}}})) |
(AnsNaN&(Res[P.Q_LEN-2:0] === Ans[P.Q_LEN-2:0])) |
(XNaN&(Res[P.Q_LEN-2:0] === {X[P.Q_LEN-2:P.Q_NF],1'b1,X[P.Q_NF-2:0]})) |
(YNaN&(Res[P.Q_LEN-2:0] === {Y[P.Q_LEN-2:P.Q_NF],1'b1,Y[P.Q_NF-2:0]})));
2'b01: NaNGood = (((P.IEEE754==0)&AnsNaN&(Res[P.D_LEN-1:0] === {1'b0, {P.D_NE+1{1'b1}}, {P.D_NF-1{1'b0}}})) |
(AnsFlg[4]&(Res[P.D_LEN-2:0] === {{P.D_NE+1{1'b1}}, {P.D_NF-1{1'b0}}})) |
(AnsNaN&(Res[P.D_LEN-2:0] === Ans[P.D_LEN-2:0])) |
(XNaN&(Res[P.D_LEN-2:0] === {X[P.D_LEN-2:P.D_NF],1'b1,X[P.D_NF-2:0]})) |
(YNaN&(Res[P.D_LEN-2:0] === {Y[P.D_LEN-2:P.D_NF],1'b1,Y[P.D_NF-2:0]})));
2'b00: NaNGood = (((P.IEEE754==0)&AnsNaN&(Res[P.S_LEN-1:0] === {1'b0, {P.S_NE+1{1'b1}}, {P.S_NF-1{1'b0}}})) |
(AnsFlg[4]&(Res[P.S_LEN-2:0] === {{P.S_NE+1{1'b1}}, {P.S_NF-1{1'b0}}})) |
(AnsNaN&(Res[P.S_LEN-2:0] === Ans[P.S_LEN-2:0])) |
(XNaN&(Res[P.S_LEN-2:0] === {X[P.S_LEN-2:P.S_NF],1'b1,X[P.S_NF-2:0]})) |
(YNaN&(Res[P.S_LEN-2:0] === {Y[P.S_LEN-2:P.S_NF],1'b1,Y[P.S_NF-2:0]})));
2'b10: NaNGood = (((P.IEEE754==0)&AnsNaN&(Res[P.H_LEN-1:0] === {1'b0, {P.H_NE+1{1'b1}}, {P.H_NF-1{1'b0}}})) |
(AnsFlg[4]&(Res[P.H_LEN-2:0] === {{P.H_NE+1{1'b1}}, {P.H_NF-1{1'b0}}})) |
(AnsNaN&(Res[P.H_LEN-2:0] === Ans[P.H_LEN-2:0])) |
(XNaN&(Res[P.H_LEN-2:0] === {X[P.H_LEN-2:P.H_NF],1'b1,X[P.H_NF-2:0]})) |
(YNaN&(Res[P.H_LEN-2:0] === {Y[P.H_LEN-2:P.H_NF],1'b1,Y[P.H_NF-2:0]})));
endcase
else NaNGood = 1'b0; // integers can't be NaNs
///////////////////////////////////////////////////////////////////////////////////////////////
// ||||||| ||| ||| ||||||| ||||||| ||| |||
// ||| ||| ||| ||| ||| ||| |||
// ||| |||||||||| ||||||| ||| ||||||
// ||| ||| ||| ||| ||| ||| |||
// ||||||| ||| ||| ||||||| ||||||| ||| |||
///////////////////////////////////////////////////////////////////////////////////////////////
// check if result is correct
assign ResMatch = ((Res[P.FLEN-1:0] === Ans[P.FLEN-1:0]) | NaNGood | (NaNGood === 1'bx));
assign FlagMatch = ((ResFlg === AnsFlg) | (AnsFlg === 5'bx));
assign divsqrtop = (OpCtrlVal == `SQRT_OPCTRL) | (OpCtrlVal == `DIV_OPCTRL);
assign FMAop = (OpCtrlVal == `FMAUNIT);
assign DivDone = OldFDivBusyE & ~FDivBusyE;
assign CheckNow = ((DivDone | ~divsqrtop) |
(TEST == "add" | TEST == "fma" | TEST == "sub") |
((TEST == "all") & (DivDone | ~divsqrtop)));
if (~(ResMatch & FlagMatch) & CheckNow & (Ans[0] !== 1'bx)) begin
errors += 1;
$display("\nError in %s", Tests[TestNum]);
$display("TestNum %d VectorNum %d OpCtrl %d", TestNum, VectorNum, OpCtrl[TestNum]);
$display("inputs: %h %h %h\nSrcA: %h\n Res: %h %h\n Expected: %h %h",
X[P.FLEN-1:0], Y[P.FLEN-1:0], Z[P.FLEN-1:0], SrcA, Res[P.FLEN-1:0], ResFlg, Ans[P.FLEN-1:0], AnsFlg);
$stop;
end
if (TestVectors[VectorNum][0] === 1'bx & Tests[TestNum] !== "") begin // if reached the eof
// increment the test
TestNum += 1;
// clear the vectors
for(int i=0; i<MAXVECTORS; i++) TestVectors[i] = {P.Q_LEN*4+8{1'bx}};
// read next files
$readmemh({`PATH, Tests[TestNum]}, TestVectors);
// set the vector index back to 0
VectorNum = 0;
// incemet the operation if all the rounding modes have been tested
if (FrmNum === 4) OpCtrlNum += 1;
// increment the rounding mode or loop back to rne
if (FrmNum < 4) FrmNum += 1;
else begin
FrmNum = 0;
// Add some time as a buffer between tests at the end of each test
// (to be removed)
repeat (10)
@(posedge clk);
end
// if no more Tests - finish
if (Tests[TestNum] === "") begin
$display("\nAll Tests completed with %d errors\n", errors);
$stop;
end
$display("Running %s vectors", Tests[TestNum]);
end
end
endmodule
module readvectors import cvw::*; #(parameter cvw_t P) (
input logic clk,
input logic [P.Q_LEN*4+7:0] TestVector,
input logic [P.FMTBITS-1:0] ModFmt,
input logic [1:0] Fmt,
input logic [2:0] Unit,
input logic [31:0] VectorNum,
input logic [31:0] TestNum,
input logic [2:0] OpCtrl,
output logic [P.Q_LEN-1:0] Ans,
output logic [P.XLEN-1:0] SrcA,
output logic [4:0] AnsFlg,
output logic Xs, Ys, Zs, // sign bits of XYZ
output logic [P.NE-1:0] Xe, Ye, Ze, // exponents of XYZ (converted to largest supported precision)
output logic [P.NF:0] Xm, Ym, Zm, // mantissas of XYZ (converted to largest supported precision)
output logic XNaN, YNaN, ZNaN, // is XYZ a NaN
output logic XSNaN, YSNaN, ZSNaN, // is XYZ a signaling NaN
output logic XSubnorm, ZSubnorm, // is XYZ denormalized
output logic XZero, YZero, ZZero, // is XYZ zero
output logic XInf, YInf, ZInf, // is XYZ infinity
output logic XExpMax,
output logic [P.Q_LEN-1:0] X, Y, Z,
output logic [P.FLEN-1:0] XPostBox,
output logic [P.NE-2:0] BiasE, // Bias of exponent
output logic [P.LOGFLEN-1:0] NfE // Number of fractional bits
);
localparam Q_LEN = 32'd128;
logic XEn;
logic YEn;
logic ZEn;
logic FPUActive;
// apply test vectors on rising edge of clk
// Format of vectors Inputs(1/2/3)_AnsFlg
always @(VectorNum) begin
AnsFlg = TestVector[4:0];
//$display("Entering readvectors with VectorNum=%d, TestVector=%x, Unit=%d, Fmt=%d, OpCtrl=%d", VectorNum, TestVector, Unit, Fmt, OpCtrl);
case (Unit)
`FMAUNIT:
case (Fmt)
2'b11: if (P.Q_SUPPORTED) begin // quad
if (OpCtrl === `FMA_OPCTRL) begin
X = TestVector[8+4*(P.Q_LEN)-1:8+3*(P.Q_LEN)];
Y = TestVector[8+3*(P.Q_LEN)-1:8+2*(P.Q_LEN)];
Z = TestVector[8+2*(P.Q_LEN)-1:8+P.Q_LEN];
end
else begin
X = TestVector[8+3*(P.Q_LEN)-1:8+2*(P.Q_LEN)];
if (OpCtrl === `MUL_OPCTRL) Y = TestVector[8+2*(P.Q_LEN)-1:8+(P.Q_LEN)]; else Y = {2'b0, {P.Q_NE-1{1'b1}}, (P.Q_NF)'(0)};
if (OpCtrl === `MUL_OPCTRL) Z = 0; else Z = TestVector[8+2*(P.Q_LEN)-1:8+(P.Q_LEN)];
end
Ans = TestVector[8+(P.Q_LEN-1):8];
end
2'b01: if (P.D_SUPPORTED) begin // double
if (OpCtrl === `FMA_OPCTRL) begin
X = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+4*(P.D_LEN)-1:8+3*(P.D_LEN)]};
Y = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+3*(P.D_LEN)-1:8+2*(P.D_LEN)]};
Z = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+2*(P.D_LEN)-1:8+P.D_LEN]};
$display("Read %x %x %x", X, Y, Z);
end
else begin
X = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+3*(P.D_LEN)-1:8+2*(P.D_LEN)]};
if (OpCtrl === `MUL_OPCTRL) Y = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+2*(P.D_LEN)-1:8+(P.D_LEN)]};
else Y = {{P.Q_LEN-P.D_LEN{1'b1}}, 2'b0, {P.D_NE-1{1'b1}}, (P.D_NF)'(0)};
if (OpCtrl === `MUL_OPCTRL) Z = {{P.Q_LEN-P.D_LEN{1'b1}}, {P.D_LEN{1'b0}}};
else Z = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+2*(P.D_LEN)-1:8+(P.D_LEN)]};
end
Ans = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+(P.D_LEN-1):8]};
end
2'b00: if (P.F_SUPPORTED) begin // single
if (OpCtrl === `FMA_OPCTRL) begin
X = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+4*(P.S_LEN)-1:8+3*(P.S_LEN)]};
Y = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+3*(P.S_LEN)-1:8+2*(P.S_LEN)]};
Z = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+2*(P.S_LEN)-1:8+P.S_LEN]};
end
else begin
X = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+3*(P.S_LEN)-1:8+2*(P.S_LEN)]};
if (OpCtrl === `MUL_OPCTRL) Y = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+2*(P.S_LEN)-1:8+(P.S_LEN)]};
else Y = {{P.Q_LEN-P.S_LEN{1'b1}}, 2'b0, {P.S_NE-1{1'b1}}, (P.S_NF)'(0)};
if (OpCtrl === `MUL_OPCTRL) Z = {{P.Q_LEN-P.S_LEN{1'b1}}, {P.S_LEN{1'b0}}};
else Z = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+2*(P.S_LEN)-1:8+(P.S_LEN)]};
end
Ans = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+(P.S_LEN-1):8]};
end
2'b10: begin // half
if (OpCtrl === `FMA_OPCTRL) begin
X = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+4*(P.H_LEN)-1:8+3*(P.H_LEN)]};
Y = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+3*(P.H_LEN)-1:8+2*(P.H_LEN)]};
Z = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+2*(P.H_LEN)-1:8+P.H_LEN]};
end
else begin
X = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+3*(P.H_LEN)-1:8+2*(P.H_LEN)]};
if (OpCtrl === `MUL_OPCTRL) Y = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+2*(P.H_LEN)-1:8+(P.H_LEN)]};
else Y = {{P.Q_LEN-P.H_LEN{1'b1}}, 2'b0, {P.H_NE-1{1'b1}}, (P.H_NF)'(0)};
if (OpCtrl === `MUL_OPCTRL) Z = {{P.Q_LEN-P.H_LEN{1'b1}}, {P.H_LEN{1'b0}}};
else Z = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+2*(P.H_LEN)-1:8+(P.H_LEN)]};
end
Ans = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+(P.H_LEN-1):8]};
end
endcase
`DIVUNIT:
if (OpCtrl[0])
case (Fmt)
2'b11: begin // quad
X = TestVector[8+2*(P.Q_LEN)-1:8+(P.Q_LEN)];
Ans = TestVector[8+(P.Q_LEN-1):8];
end
2'b01: if (P.D_SUPPORTED) begin // double
X = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+2*(P.D_LEN)-1:8+(P.D_LEN)]};
Ans = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+(P.D_LEN-1):8]};
end
2'b00: if (P.F_SUPPORTED) begin // single
X = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+2*(P.S_LEN)-1:8+1*(P.S_LEN)]};
Ans = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+(P.S_LEN-1):8]};
end
2'b10: begin // half
X = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+2*(P.H_LEN)-1:8+(P.H_LEN)]};
Ans = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+(P.H_LEN-1):8]};
end
endcase
else
case (Fmt)
2'b11: begin // quad
X = TestVector[8+3*(P.Q_LEN)-1:8+2*(P.Q_LEN)];
Y = TestVector[8+2*(P.Q_LEN)-1:8+(P.Q_LEN)];
Ans = TestVector[8+(P.Q_LEN-1):8];
end
2'b01: if (P.D_SUPPORTED) begin // double
X = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+3*(P.D_LEN)-1:8+2*(P.D_LEN)]};
Y = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+2*(P.D_LEN)-1:8+(P.D_LEN)]};
Ans = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+(P.D_LEN-1):8]};
end
2'b00: if (P.F_SUPPORTED) begin // single
X = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+3*(P.S_LEN)-1:8+2*(P.S_LEN)]};
Y = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+2*(P.S_LEN)-1:8+1*(P.S_LEN)]};
Ans = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+(P.S_LEN-1):8]};
end
2'b10: begin // half
X = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+3*(P.H_LEN)-1:8+2*(P.H_LEN)]};
Y = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+2*(P.H_LEN)-1:8+(P.H_LEN)]};
Ans = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+(P.H_LEN-1):8]};
end
endcase
`CMPUNIT:
case (Fmt)
2'b11: begin // quad
X = TestVector[12+2*(P.Q_LEN)-1:12+(P.Q_LEN)];
Y = TestVector[12+(P.Q_LEN)-1:12];
Ans = {{P.Q_LEN-1{1'b0}}, TestVector[8]};
end
2'b01: if (P.D_SUPPORTED) begin // double
X = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[12+2*(P.D_LEN)-1:12+(P.D_LEN)]};
Y = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[12+(P.D_LEN)-1:12]};
Ans = {{P.Q_LEN-1{1'b0}}, TestVector[8]};
end
2'b00: if (P.F_SUPPORTED) begin // single
X = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[12+2*(P.S_LEN)-1:12+(P.S_LEN)]};
Y = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[12+(P.S_LEN)-1:12]};
Ans = {{P.Q_LEN-1{1'b0}}, TestVector[8]};
end
2'b10: begin // half
X = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[12+2*(P.H_LEN)-1:12+(P.H_LEN)]};
Y = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[12+(P.H_LEN)-1:12]};
Ans = {{P.Q_LEN-1{1'b0}}, TestVector[8]};
end
endcase
`CVTFPUNIT:
case (Fmt)
2'b11: begin // quad
case (OpCtrl[1:0])
2'b11: begin // quad
X = {TestVector[8+P.Q_LEN+P.Q_LEN-1:8+(P.Q_LEN)]};
Ans = TestVector[8+(P.Q_LEN-1):8];
end
2'b01: if (P.D_SUPPORTED) begin // double
X = {TestVector[8+P.Q_LEN+P.D_LEN-1:8+(P.D_LEN)]};
Ans = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+(P.D_LEN-1):8]};
end
2'b00: begin // single
X = {TestVector[8+P.Q_LEN+P.S_LEN-1:8+(P.S_LEN)]};
Ans = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+(P.S_LEN-1):8]};
end
2'b10: begin // half
X = {TestVector[8+P.Q_LEN+P.H_LEN-1:8+(P.H_LEN)]};
Ans = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+(P.H_LEN-1):8]};
end
endcase
end
2'b01: if (P.D_SUPPORTED) begin // double
case (OpCtrl[1:0])
2'b11: begin // quad
X = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+P.D_LEN+P.Q_LEN-1:8+(P.Q_LEN)]};
Ans = TestVector[8+(P.Q_LEN-1):8];
end
2'b01: begin // double
X = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+P.D_LEN+P.D_LEN-1:8+(P.D_LEN)]};
Ans = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+(P.D_LEN-1):8]};
end
2'b00: begin // single
X = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+P.D_LEN+P.S_LEN-1:8+(P.S_LEN)]};
Ans = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+(P.S_LEN-1):8]};
end
2'b10: begin // half
X = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+P.D_LEN+P.H_LEN-1:8+(P.H_LEN)]};
Ans = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+(P.H_LEN-1):8]};
end
endcase
end
2'b00: if (P.F_SUPPORTED) begin // single
case (OpCtrl[1:0])
2'b11: begin // quad
X = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+P.S_LEN+P.Q_LEN-1:8+(P.Q_LEN)]};
Ans = TestVector[8+(P.Q_LEN-1):8];
end
2'b01: if (P.D_SUPPORTED) begin // double
X = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+P.S_LEN+P.D_LEN-1:8+(P.D_LEN)]};
Ans = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+(P.D_LEN-1):8]};
end
2'b00: begin // single
X = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+P.S_LEN+P.S_LEN-1:8+(P.S_LEN)]};
Ans = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+(P.S_LEN-1):8]};
end
2'b10: begin // half
X = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+P.S_LEN+P.H_LEN-1:8+(P.H_LEN)]};
Ans = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+(P.H_LEN-1):8]};
end
endcase
end
2'b10: begin // half
case (OpCtrl[1:0])
2'b11: begin // quad
X = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+P.H_LEN+P.Q_LEN-1:8+(P.Q_LEN)]};
Ans = TestVector[8+(P.Q_LEN-1):8];
end
2'b01: if (P.D_SUPPORTED) begin // double
X = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+P.H_LEN+P.D_LEN-1:8+(P.D_LEN)]};
Ans = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+(P.D_LEN-1):8]};
end
2'b00: if (P.F_SUPPORTED) begin // single
X = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+P.H_LEN+P.S_LEN-1:8+(P.S_LEN)]};
Ans = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+(P.S_LEN-1):8]};
end
2'b10: begin // half
X = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+P.H_LEN+P.H_LEN-1:8+(P.H_LEN)]};
Ans = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+(P.H_LEN-1):8]};
end
endcase
end
endcase
`CVTINTUNIT:
case (Fmt)
2'b11: begin // quad
// {is the integer a long, is the opperation to an integer}
casez ({OpCtrl[2:1]})
2'b11: begin // long -> quad
X = {P.Q_LEN{1'bx}};
SrcA = TestVector[8+P.Q_LEN+P.XLEN-1:8+(P.Q_LEN)];
Ans = TestVector[8+(P.Q_LEN-1):8];
end
2'b10: begin // int -> quad
// correctly sign extend the integer depending on if it's a signed/unsigned test
X = {P.Q_LEN{1'bx}};
SrcA = {{P.XLEN-32{TestVector[8+P.Q_LEN+32-1]}}, TestVector[8+P.Q_LEN+32-1:8+(P.Q_LEN)]};
Ans = TestVector[8+(P.Q_LEN-1):8];
end
2'b01: begin // quad -> long
X = {TestVector[8+P.XLEN+P.Q_LEN-1:8+(P.XLEN)]};
SrcA = {P.XLEN{1'bx}};
Ans = {{(P.Q_LEN-64){1'b0}}, TestVector[8+(64-1):8]};
end
2'b00: begin // quad -> int
X = {TestVector[8+32+P.Q_LEN-1:8+(32)]};
SrcA = {P.XLEN{1'bx}};
Ans = {{(P.Q_LEN-32){TestVector[8+32-1]}},TestVector[8+(32-1):8]};
end
endcase
end
2'b01: if (P.D_SUPPORTED) begin // double
// {Int->Fp?, is the integer a long}
casez ({OpCtrl[2:1]})
2'b11: begin // long -> double
X = {P.Q_LEN{1'bx}};
SrcA = TestVector[8+P.D_LEN+P.XLEN-1:8+(P.D_LEN)];
Ans = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+(P.D_LEN-1):8]};
end
2'b10: begin // int -> double
// correctly sign extend the integer depending on if it's a signed/unsigned test
X = {P.Q_LEN{1'bx}};
SrcA = {{P.XLEN-32{TestVector[8+P.D_LEN+32-1]}}, TestVector[8+P.D_LEN+32-1:8+(P.D_LEN)]};
Ans = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+(P.D_LEN-1):8]};
end
2'b01: begin // double -> long
X = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+P.XLEN+P.D_LEN-1:8+(P.XLEN)]};
SrcA = {P.XLEN{1'bx}};
Ans = {{(P.Q_LEN-64){1'b0}}, TestVector[8+(64-1):8]};
end
2'b00: begin // double -> int
X = {{P.Q_LEN-P.D_LEN{1'b1}}, TestVector[8+32+P.D_LEN-1:8+(32)]};
SrcA = {P.XLEN{1'bx}};
Ans = {{P.Q_LEN-32{TestVector[8+32-1]}},TestVector[8+(32-1):8]};
end
endcase
end
2'b00: if (P.F_SUPPORTED) begin // single
// {is the integer a long, is the opperation to an integer}
casez ({OpCtrl[2:1]})
2'b11: begin // long -> single
X = {P.Q_LEN{1'bx}};
SrcA = TestVector[8+P.S_LEN+P.XLEN-1:8+(P.S_LEN)];
Ans = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+(P.S_LEN-1):8]};
end
2'b10: begin // int -> single
// correctly sign extend the integer depending on if it's a signed/unsigned test
X = {P.Q_LEN{1'bx}};
SrcA = {{P.XLEN-32{TestVector[8+P.S_LEN+32-1]}}, TestVector[8+P.S_LEN+32-1:8+(P.S_LEN)]};
Ans = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+(P.S_LEN-1):8]};
end
2'b01: begin // single -> long
X = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+P.XLEN+P.S_LEN-1:8+(P.XLEN)]};
SrcA = {P.XLEN{1'bx}};
Ans = {{(P.Q_LEN-64){1'b0}}, TestVector[8+(64-1):8]};
end
2'b00: begin // single -> int
X = {{P.Q_LEN-P.S_LEN{1'b1}}, TestVector[8+32+P.S_LEN-1:8+(32)]};
SrcA = {P.XLEN{1'bx}};
Ans = {{(P.Q_LEN-32){TestVector[8+32-1]}},TestVector[8+(32-1):8]};
end
endcase
end
2'b10: begin // half
// {is the integer a long, is the opperation to an integer}
casez ({OpCtrl[2:1]})
2'b11: begin // long -> half
X = {P.Q_LEN{1'bx}};
SrcA = TestVector[8+P.H_LEN+P.XLEN-1:8+(P.H_LEN)];
Ans = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+(P.H_LEN-1):8]};
end
2'b10: begin // int -> half
// correctly sign extend the integer depending on if it's a signed/unsigned test
X = {P.Q_LEN{1'bx}};
SrcA = {{P.XLEN-32{TestVector[8+P.H_LEN+32-1]}}, TestVector[8+P.H_LEN+32-1:8+(P.H_LEN)]};
Ans = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+(P.H_LEN-1):8]};
end
2'b01: begin // half -> long
X = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+P.XLEN+P.H_LEN-1:8+(P.XLEN)]};
SrcA = {P.XLEN{1'bx}};
Ans = {{(P.Q_LEN-64){1'b0}}, TestVector[8+(64-1):8]};
end
2'b00: begin // half -> int
X = {{P.Q_LEN-P.H_LEN{1'b1}}, TestVector[8+32+P.H_LEN-1:8+(32)]};
SrcA = {P.XLEN{1'bx}};
Ans = {{(P.Q_LEN-32){TestVector[8+32-1]}}, TestVector[8+(32-1):8]};
end
endcase
end
endcase
endcase
end
assign XEn = ~((Unit == `CVTINTUNIT)&OpCtrl[2]);
assign YEn = ~((Unit == `CVTINTUNIT)|(Unit == `CVTFPUNIT)|((Unit == `DIVUNIT)&OpCtrl[0]));
assign ZEn = (Unit == `FMAUNIT);
assign FPUActive = 1'b1;
unpack #(P) unpack(.X(X[P.FLEN-1:0]), .Y(Y[P.FLEN-1:0]), .Z(Z[P.FLEN-1:0]), .Fmt(ModFmt), .FPUActive, .Xs, .Ys, .Zs, .Xe, .Ye, .Ze,
.Xm, .Ym, .Zm, .XNaN, .YNaN, .ZNaN, .XSNaN, .YSNaN, .ZSNaN,
.XSubnorm, .XZero, .YZero, .ZZero, .XInf, .YInf, .ZInf,
.XEn, .YEn, .ZEn, .XExpMax, .XPostBox, .Bias(BiasE), .Nf(NfE));
endmodule