Ross Thompson
a16b97cfb4
Added default to busfsm.
2021-12-29 17:53:24 -06:00
Ross Thompson
90ccc94e5e
Moved lsu interlock fpm to separate module.
2021-12-29 17:40:24 -06:00
Ross Thompson
81741925aa
Moved LSU Bus interface control path into it's own module.
2021-12-29 17:35:45 -06:00
Ross Thompson
1730f644af
Name cleanup in LSU.
2021-12-29 16:34:35 -06:00
Ross Thompson
050523487c
Changed names of lsu address signals.
2021-12-29 15:03:34 -06:00
Ross Thompson
b1116600fe
Added more generates around virtual memory and csrs in the lsu.
2021-12-29 14:48:09 -06:00
Ross Thompson
0c88ddeb5a
Simplified the dcache to bus address generation.
2021-12-29 10:46:48 -06:00
Ross Thompson
6052a69ba7
Fixed interrupt delay bug by reverting CommittedM changes.
2021-12-28 22:27:12 -06:00
Ross Thompson
1894afd0d8
Changed name of LSU's FetchCount to WordCount. This better reflex the dual usage as fetch and eviction counters.
...
Fixed bug with the uncached memory operations. The periph tests still do not pass. They enter into what seems an intentional infinite loop. Then a uart interrupt jumps into an ISR but the ISR returns back to the loop.
2021-12-28 21:28:03 -06:00
Ross Thompson
39bd78c295
Changed the bus name between dcache and ebu.
2021-12-28 15:57:36 -06:00
Ross Thompson
13b4201198
Added generate around virtual memory hardware in LSU.
2021-12-28 15:00:02 -06:00
Ross Thompson
74d636cb53
First cut at moving the dcache bus interface into the LSU.
...
Regression test does not run and there is a lot of cleanup to do.
2021-12-27 18:12:59 -06:00
Ross Thompson
7fe70c3cc6
Removed the fault state from the hptw. Now writing TLB faults into the I/DTLBs. This has two advantages.
...
1: It simplifies the interactions between the caches and the hptw.
2: instruction page faults are fetched 3 times, caching them in the ITLB speeds up this process.
There are two downsides.
1: Pollute the TLBs with not very relavent translations
2: Have to compute the misalignment. This can be cached in the TLB which only costs 1 flip flop
for each TLB line.
2021-12-23 12:40:22 -06:00
Ross Thompson
d3c3422d12
Rename of SelPTW to SelHPTW.
2021-12-19 22:24:07 -06:00
Ross Thompson
c9291655da
Fixed bug most of the bugs related to the dcache changes, but the mmu tests don't pass.
2021-12-19 16:12:31 -06:00
Ross Thompson
a445bedcd2
Modified the icache memory to read using the virtual (non physical) address in the PCNextF stage.
...
This allows recovering from an ITLBMiss to be 1 cycle after and simplifies the hptw slightly.
2021-12-19 14:57:42 -06:00
Ross Thompson
225cd5a114
Renamed MemAdrM to IEUAdrM. This will free the name MemAdrm for use in the DCache.
2021-12-19 14:00:30 -06:00
Ross Thompson
1126135b80
minro change. comments about needed changes in dcache.
2021-12-19 13:53:02 -06:00
David Harris
0f319b45c1
Do File cleanups
2021-12-17 17:45:26 -08:00
David Harris
b3bded9e6c
Added more pipeline stage suffixes to divider
2021-10-02 22:54:01 -04:00
Ross Thompson
e16c27225b
Finished adding the d cache flush. Required ensuring the write data, address, and size are
...
correct when transmitting to AHBLite interface.
2021-09-17 13:03:04 -05:00
Ross Thompson
615fd41e7b
Added states and all control and data path logic to support d cache flush. This is currently untested; however the existing regresss test passes.
2021-09-16 18:32:29 -05:00
Ross Thompson
cae350abb7
Added invalidate to icache.
2021-09-16 16:15:54 -05:00
Ross Thompson
a15d6c1c96
Slight modification to wave file.
2021-09-08 10:40:46 -05:00
Ross Thompson
05455f8392
Changed name of memory in icache.
2021-09-06 20:54:52 -05:00
Ross Thompson
2968623f9a
Partial multiway set associative icache.
2021-08-30 10:49:24 -05:00
Ross Thompson
96cbd8e785
Modified icache to no longer need StallF in the PCMux logic. Instead this is handled in the icachefsm.
...
One downside is it increases the icache complexity. However it also fixes an untested bug. If a region
was uncacheable it would have been possible for the request to be made multiple times. Now that is
not possible. Additionally spills were oscillating between the spill hit states without this change.
The impact was 'benign' as the final spilled instruction always had the correct upper 16 bits.
2021-08-27 11:03:36 -05:00
Ross Thompson
d6ff89b7e6
Swapped out the icachemem for cacheway. cacheway is modified to optionally support dirty bits.
2021-08-26 15:43:02 -05:00
Ross Thompson
e4bbd3bbc7
Converted the icache type from logic to state type.
2021-08-26 10:41:42 -05:00
Ross Thompson
0530047f53
Moved dcache fsm to separate module.
2021-08-25 21:37:10 -05:00
Ross Thompson
d23b860c96
Moved LRU and storage for the LRU into a single module. Also found a subtle bug with the update address used to write the cache's memory.
...
This was correct for the LRU but incorrect for the data, tag, valid, and dirty storage.
2021-08-25 21:09:42 -05:00
Ross Thompson
e9a1dc90f6
Removed generate around the dcache memories.
2021-08-25 13:27:26 -05:00
Ross Thompson
55fda4de62
Switched ExceptionM to dcache to be just exceptions.
...
Added test bench logic to hold forces until the W stage is unstalled.
2021-08-13 15:53:50 -05:00
Ross Thompson
e166cc84ee
Patched up changes for wally-pipelined.do and wally-buildroot.do to support moved common testbench files.
2021-07-30 14:24:50 -05:00
Ross Thompson
3e916da36e
Removed the hardware page table walker fault state from the icache so that the icache will only unstall CPU for 1 cycle.
...
In the dcache we added a register to save the load read data in the event an itlb miss occurs concurrently with
the load in the memory stage. Under this situation we need to record the load ReadDataM into a temporary register,
SavedReadDataM. At this time the CPU is stall; however the walker is going to change the address in the dcache
which destroys this data. When leaving the PTW_READY state via a walker instruction fault or ITLB write we select
this SavedReadDataM so that the CPU can capture it.
2021-07-22 19:42:19 -05:00
Ross Thompson
551e3491af
Moved the ReadDataW register into the datapath.
...
The StallW from the hazard unit controls this.
Previously it was in the dcache and controlled by both the HPTW and hazard unit.
This caused an issue when the CPU expected the data to stay constant while
stalled, but the HPTW was causing the data to be modified.
2021-07-22 14:52:03 -05:00
Ross Thompson
25a8920a69
Tested all numbers of ways for dcache 1, 2, 4, and 8.
2021-07-22 10:38:07 -05:00
Ross Thompson
313bc5255c
Improved address bus names and usages in the walker, dcache, and tlbs.
...
Merge branch 'walkerEnhance' into main
2021-07-21 14:55:09 -05:00
Ross Thompson
e0990535e1
Fixed remaining bugs in 2 way set associative dcache.
2021-07-21 10:35:23 -05:00
Ross Thompson
14e949d6e3
Partially working 2 way set associative d cache.
2021-07-20 17:51:42 -05:00
Ross Thompson
b61dad4b83
Fixed a complex bug in the dcache, where back to back loads would lose data on the load before a stall occurred. The solution was to modify the logic for SelAdrM in the dcache so that a stall would cause the SRAM to reread the address in the Memory stage rather than Execution stage. This also required updating the ReadDataWEn control so it is always enabled on ~StallW.
2021-07-19 12:32:16 -05:00
Ross Thompson
4d53b9002f
Broken.
...
Possible change to walker, dcache, tlb addressing.
Improves the naming of address signals.
But has a problem when the walker finishes the dcache does not get the correct
address on the cycle the DTLB is updated. This leads to incorrect index
selection in the dcache.
2021-07-19 10:33:27 -05:00
Ross Thompson
6521d2b468
Also changed the shadow ram's dcache copy widths.
...
Merge branch 'dcache' into main
2021-07-16 14:21:09 -05:00
Ross Thompson
b3bf04d474
Updated wave file.
2021-07-16 12:34:37 -05:00
Ross Thompson
46bce70e42
Fixed walker fault interaction with dcache.
2021-07-16 12:22:13 -05:00
Ross Thompson
e5d624c1fa
Found bug in the PMA such that invalid addresses were sent to the tim. Once addressing this issue the sv48 test fails early with a pma access fault.
2021-07-15 11:56:35 -05:00
Ross Thompson
fd1de6b047
Updated wave file.
2021-07-15 11:04:49 -05:00
Ross Thompson
704f4f724e
dcache STATE_CPU_BUSY needs to assert CommittedM. This is required to ensure a completed memory operation is not bound to an interrupt. ie. MEPC should not be PCM when committed.
2021-07-14 23:08:07 -05:00
Ross Thompson
ba1e1ec231
Finally have the ptw correctly walking through the dcache to update the itlb.
...
Still not working fully.
2021-07-14 22:26:07 -05:00
Ross Thompson
2c946a282f
Fixed d cache not honoring StallW for uncache writes and reads.
2021-07-14 17:23:28 -05:00
