Github_Repos/cvw
1
0
Fork 1
mirror of https://github.com/openhwgroup/cvw synced 2025-02-11 06:05:49 +00:00
Code Issues Packages Projects Releases Wiki Activity

Hack added to uart so QEMU simulation can work with an ultra fast baud rate relative to the clock speed.

Browse Source
This commit is contained in:
Ross Thompson 2021-11-22 15:20:54 -06:00
parent d5cf6da6eb
commit f05a66acd1
1 changed files with 24 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

31
wally-pipelined/src/uncore/uartPC16550D.sv
View File

@ -133,23 +133,27 @@ module uartPC16550D(
if (~HRESETn) begin // Table 3 Reset Configuration
IER <= #1 4'b0;
FCR <= #1 8'b0;
LCR <= #1 8'b0;
LCR <= #1 8'b11;
MCR <= #1 5'b0;
LSR <= #1 8'b01100000;
MSR <= #1 4'b0;
DLL <= #1 8'd1; // this cannot be zero with DLM also zer0.
DLM <= #1 8'b0;
/* -----\/----- EXCLUDED -----\/-----
DLL <= #1 8'd11;
DLM <= #1 8'b0;
-----/\----- EXCLUDED -----/\----- */
SCR <= #1 8'b0; // not strictly necessary to reset
end else begin
if (~MEMWb) begin
case (A)
/* -----\/----- EXCLUDED -----\/-----
3'b000: if (DLAB) DLL <= #1 Din; // else TXHR <= #1 Din; // TX handled in TX register/FIFO section
3'b001: if (DLAB) DLM <= #1 Din; else IER <= #1 Din[3:0];
-----/\----- EXCLUDED -----/\----- */
// *** BUG FIX ME for now for the divider to be 11. Our clock is 10 Mhz. 10Mhz /(11 * 16) = 56818 baud, which is close enough to 57600 baud
3'b000: if (DLAB) DLL <= #1 8'd11; // else TXHR <= #1 Din; // TX handled in TX register/FIFO section
/* -----\/----- EXCLUDED -----\/-----
3'b000: if (DLAB) DLL <= #1 8'd11 else TXHR <= #1 Din; // TX handled in TX register/FIFO section
3'b001: if (DLAB) DLM <= #1 8'b0; else IER <= #1 Din[3:0];
-----/\----- EXCLUDED -----/\----- */
3'b010: FCR <= #1 {Din[7:6], 2'b0, Din[3], 2'b0, Din[0]}; // Write only FIFO Control Register; 4:5 reserved and 2:1 self-clearing
3'b011: LCR <= #1 Din;
@ -205,7 +209,7 @@ module uartPC16550D(
baudcount <= #1 1;
baudpulse <= #1 0;
end else if (~MEMWb & DLAB & (A == 3'b0 || A == 3'b1)) begin
baudcount <= #1 '0;
baudcount <= #1 1;
end else begin
// the baudpulse is too long by 2 clock cycles.
// This is cause baudpulse is registered adding 1 cycle and
@ -250,7 +254,14 @@ module uartPC16550D(
else if (fifoenabled & ~rxfifoempty & rxbaudpulse & ~rxfifotimeout) rxtimeoutcnt <= #1 rxtimeoutcnt+1; // *** not right
end
assign rxcentered = rxbaudpulse & (rxoversampledcnt == 4'b1000); // implies rxstate = UART_ACTIVE
generate
if(`QEMU)
assign rxcentered = rxbaudpulse & (rxoversampledcnt == 4'b10); // implies rxstate = UART_ACTIVE
else
assign rxcentered = rxbaudpulse & (rxoversampledcnt == 4'b1000); // implies rxstate = UART_ACTIVE
endgenerate
assign rxcentered = rxbaudpulse & (rxoversampledcnt == 2'b10); // implies rxstate = UART_ACTIVE
assign rxbitsexpected = 4'd1 + (4'd5 + {2'b00, LCR[1:0]}) + {3'b000, LCR[3]} + 4'd1; // start bit + data bits + (parity bit) + stop bit
///////////////////////////////////////////
@ -370,7 +381,13 @@ module uartPC16550D(
end
assign txbitsexpected = 4'd1 + (4'd5 + {2'b00, LCR[1:0]}) + {3'b000, LCR[3]} + 4'd1 + {3'b000, LCR[2]} - 4'd1; // start bit + data bits + (parity bit) + stop bit(s)
assign txnextbit = txbaudpulse & (txoversampledcnt == 4'b0000); // implies txstate = UART_ACTIVE
generate
if `QEMU
assign txnextbit = txbaudpulse & (txoversampledcnt == 2'b00); // implies txstate = UART_ACTIVE
else
assign txnextbit = txbaudpulse & (txoversampledcnt == 4'b0000); // implies txstate = UART_ACTIVE
endgenerate
///////////////////////////////////////////
// transmit holding register, shift register, FIFO