formatting

src/ieu/bmu/bitreverse.sv

@@ -30,12 +30,12 @@
 `include "wally-config.vh"
 
 module bitreverse #(parameter WIDTH=32) (
-  input  logic [WIDTH-1:0] a,
-  output logic [WIDTH-1:0] b);
+  input  logic [WIDTH-1:0] A,
+  output logic [WIDTH-1:0] RevA);
 
   genvar i;
   for (i=0; i<WIDTH;i++) begin:loop
-    assign b[WIDTH-i-1] = a[i];
+    assign RevA[WIDTH-i-1] = A[i];
   end
 endmodule
 

src/ieu/bmu/clmul.sv

@@ -35,8 +35,7 @@ module clmul #(parameter WIDTH=32) (
 
   logic [(WIDTH*WIDTH)-1:0] s;               // intermediary signals for carry-less multiply
   
-  integer i;
-  integer j;
+  integer i,j;
 
   always_comb begin
     for (i=0;i<WIDTH;i++) begin: outer

src/ieu/bmu/cnt.sv

@@ -57,9 +57,9 @@ module cnt #(parameter WIDTH = 32) (
 
   lzc #(WIDTH) lzc(.num(lzcA), .ZeroCnt(czResult[$clog2(WIDTH):0]));
   popcnt #(WIDTH) popcntw(.num(popcntA), .PopCnt(cpopResult[$clog2(WIDTH):0]));
-  // zero extend these results to fit into width *** There may be a more elegant way to do this
-  assign czResult[WIDTH-1:$clog2(WIDTH)+1] = {(WIDTH-$clog2(WIDTH)-1){1'b0}}; 
-  assign cpopResult[WIDTH-1:$clog2(WIDTH)+1] = {(WIDTH-$clog2(WIDTH)-1){1'b0}};
+  // zero extend these results to fit into width
+  assign czResult[WIDTH-1:$clog2(WIDTH)+1] = '0;
+  assign cpopResult[WIDTH-1:$clog2(WIDTH)+1] = '0;
 
   mux2 #(WIDTH) cntresultmux(czResult, cpopResult, B[1], CntResult);
 endmodule

src/ieu/bmu/popcnt.sv

@@ -38,5 +38,5 @@ module popcnt #(parameter WIDTH = 32) (
     end
   end
 
-  assign PopCnt = sum[$clog2(WIDTH):0];
+  assign PopCnt = sum;
 endmodule

src/ieu/bmu/zbc.sv

@@ -41,14 +41,14 @@ module zbc #(parameter WIDTH=32) (
 
   assign select = ~Funct3[1:0];
 
-  bitreverse #(WIDTH) brB(.a(B), .b(RevB));
+  bitreverse #(WIDTH) brB(.A(B), .RevA(RevB));
 
   mux3 #(WIDTH) xmux({RevA[WIDTH-2:0], {1'b0}}, RevA, A, select, x);
   mux3 #(WIDTH) ymux({{1'b0},RevB[WIDTH-2:0]}, RevB, B,  select, y);
 
   clmul #(WIDTH) clm(.A(x), .B(y), .ClmulResult(ClmulResult));
   
-  bitreverse  #(WIDTH) brClmulResult(.a(ClmulResult), .b(RevClmulResult));
+  bitreverse  #(WIDTH) brClmulResult(.A(ClmulResult), .RevA(RevClmulResult));
 
   mux2 #(WIDTH) zbcresultmux(ClmulResult, RevClmulResult, Funct3[1], ZBCResult);
 endmodule