mirror of
https://github.com/openhwgroup/cvw
synced 2025-02-11 06:05:49 +00:00
Fixed merge issues on synthDC PR
This commit is contained in:
David Harris
commit
b13087e706
@ -42,7 +42,7 @@ module RASPredictor #(parameter int StackSize = 16 )(
|
||||
logic CounterEn;
|
||||
localparam Depth = $clog2(StackSize);
|
||||
|
||||
logic [Depth-1:0] NextPtr, CurrPtr, PtrP1, PtrM1;
|
||||
logic [Depth-1:0] NextPtr, Ptr, PtrP1, PtrM1;
|
||||
logic [StackSize-1:0] [`XLEN-1:0] memory;
|
||||
integer index;
|
||||
|
||||
@ -73,10 +73,10 @@ module RASPredictor #(parameter int StackSize = 16 )(
|
||||
assign DecrementPtr = (PopF | DecRepairD) & ~IncrRepairD;
|
||||
mux2 #(Depth) PtrMux(PtrP1, PtrM1, DecrementPtr, NextPtr);
|
||||
|
||||
assign PtrM1 = CurrPtr - 1'b1;
|
||||
assign PtrP1 = CurrPtr + 1'b1;
|
||||
assign PtrM1 = Ptr - 1'b1;
|
||||
assign PtrP1 = Ptr + 1'b1;
|
||||
|
||||
flopenr #(Depth) PTR(clk, reset, CounterEn, NextPtr, CurrPtr);
|
||||
flopenr #(Depth) PTR(clk, reset, CounterEn, NextPtr, Ptr);
|
||||
|
||||
// RAS must be reset.
|
||||
always_ff @ (posedge clk) begin
|
||||
@ -88,7 +88,7 @@ module RASPredictor #(parameter int StackSize = 16 )(
|
||||
end
|
||||
end
|
||||
|
||||
assign RASPCF = memory[CurrPtr];
|
||||
assign RASPCF = memory[Ptr];
|
||||
|
||||
|
||||
endmodule
|
||||
|
||||
@ -109,6 +109,8 @@ module ifu (
|
||||
logic [31:0] ICacheInstrF; // Instruction from the I$
|
||||
logic [31:0] InstrRawF; // Instruction from the IROM, I$, or bus
|
||||
logic CompressedF; // The fetched instruction is compressed
|
||||
logic CompressedD; // The decoded instruction is compressed
|
||||
logic CompressedE; // The execution instruction is compressed
|
||||
logic [31:0] PostSpillInstrRawF; // Fetch instruction after merge two halves of spill
|
||||
logic [31:0] InstrRawD; // Non-decompressed instruction in the Decode stage
|
||||
|
||||
@ -297,18 +299,11 @@ module ifu (
|
||||
|
||||
// pcadder
|
||||
// add 2 or 4 to the PC, based on whether the instruction is 16 bits or 32
|
||||
// *** consider using PCPlus2or4F = PCF + CompressedF ? 2 : 4;
|
||||
assign PCPlus4F = PCF[`XLEN-1:2] + 1; // add 4 to PC
|
||||
// choose PC+2 or PC+4 based on CompressedF, which arrives later.
|
||||
// Speeds up critical path as compared to selecting adder input based on CompressedF
|
||||
// *** consider gating PCPlus4F to provide the reset.
|
||||
/* -----\/----- EXCLUDED -----\/-----
|
||||
assign PCPlus2or4F[0] = '0;
|
||||
assign PCPlus2or4F[1] = ~reset & (CompressedF ^ PCF[1]);
|
||||
assign PCPlus2or4F[`XLEN-1:2] = reset ? '0 : CompressedF & ~PCF[1] ? PCF[`XLEN-1:2] : PCPlus4F;
|
||||
-----/\----- EXCLUDED -----/\----- */
|
||||
/* -----\/----- EXCLUDED -----\/-----
|
||||
assign PCPlus2or4F[1:0] = reset ? 2'b00 : CompressedF ? PCF[1] ? 2'b00 : 2'b10 : PCF[1:0];
|
||||
-----/\----- EXCLUDED -----/\----- */
|
||||
|
||||
// *** There is actually a bug in the regression test. We fetched an address which returns data with
|
||||
// an X. This version of the code does not die because if CompressedF is an X it just defaults to the last
|
||||
@ -377,6 +372,11 @@ module ifu (
|
||||
flopenr #(32) InstrMReg(clk, reset, ~StallM, NextInstrE, InstrM);
|
||||
flopenr #(`XLEN) PCEReg(clk, reset, ~StallE, PCD, PCE);
|
||||
flopenr #(`XLEN) PCMReg(clk, reset, ~StallM, PCE, PCM);
|
||||
flopenr #(`XLEN) PCPDReg(clk, reset, ~StallD, PCPlus2or4F, PCLinkD);
|
||||
flopenr #(`XLEN) PCPEReg(clk, reset, ~StallE, PCLinkD, PCLinkE);
|
||||
//flopenr #(`XLEN) PCPDReg(clk, reset, ~StallD, PCPlus2or4F, PCLinkD);
|
||||
//flopenr #(`XLEN) PCPEReg(clk, reset, ~StallE, PCLinkD, PCLinkE);
|
||||
|
||||
flopenrc #(1) CompressedDReg(clk, reset, FlushD, ~StallD, CompressedF, CompressedD);
|
||||
flopenrc #(1) CompressedEReg(clk, reset, FlushE, ~StallE, CompressedD, CompressedE);
|
||||
assign PCLinkE = PCE + (CompressedE ? 2 : 4);
|
||||
|
||||
endmodule
|
||||
|
||||
@ -107,6 +107,9 @@ module spill #(
|
||||
// merge together
|
||||
mux2 #(32) postspillmux(InstrRawF, {InstrRawF[15:0], InstrFirstHalf}, SpillF, PostSpillInstrRawF);
|
||||
|
||||
assign CompressedF = PostSpillInstrRawF[1:0] != 2'b11;
|
||||
// Need to use always comb to avoid pessimistic x propagation if PostSpillInstrRawF is x
|
||||
always_comb
|
||||
if (PostSpillInstrRawF[1:0] != 2'b11) CompressedF = 1'b1;
|
||||
else CompressedF = 1'b0;
|
||||
|
||||
endmodule
|
||||
|
||||
@ -12,7 +12,7 @@ export MOD ?= orig
|
||||
# title to add a note in the synth's directory name
|
||||
TITLE =
|
||||
# tsmc28, sky130, and sky90 presently supported
|
||||
export TECH ?= sky90
|
||||
export TECH ?= tsmc28
|
||||
# MAXCORES allows parallel compilation, which is faster but less CPU-efficient
|
||||
# Avoid when doing sweeps of many optimization points in parallel
|
||||
export MAXCORES ?= 1
|
||||
@ -20,6 +20,7 @@ export MAXCORES ?= 1
|
||||
# The output netlist is hard to interpret, but significantly better PPA
|
||||
export MAXOPT ?= 0
|
||||
export DRIVE ?= FLOP
|
||||
export USESRAM ?= 0
|
||||
|
||||
time := $(shell date +%F-%H-%M)
|
||||
hash := $(shell git rev-parse --short HEAD)
|
||||
@ -27,14 +28,8 @@ export OUTPUTDIR := runs/$(DESIGN)_$(CONFIG)_$(MOD)_$(TECH)nm_$(FREQ)_MHz_$(time
|
||||
export SAIFPOWER ?= 0
|
||||
|
||||
OLDCONFIGDIR ?= ${WALLY}/config
|
||||
export CONFIGDIR ?= $(OUTPUTDIR)/hdl/config
|
||||
CONFIGFILES ?= $(shell find $(CONFIGDIR) -name rv*_*)
|
||||
CONFIGFILESTRIM = $(notdir $(CONFIGFILES))
|
||||
export CONFIGDIR ?= $(OUTPUTDIR)/config
|
||||
|
||||
print:
|
||||
@echo $(FREQS)
|
||||
@echo $(CONFIG)
|
||||
@echo $(CONFIGFILESTRIM)
|
||||
|
||||
|
||||
default:
|
||||
@ -45,8 +40,6 @@ default:
|
||||
|
||||
DIRS32 = rv32e rv32gc rv32imc rv32i
|
||||
DIRS64 = rv64i rv64gc
|
||||
DIRS32 = rv32e rv32gc rv32ic rv32i
|
||||
DIRS64 = rv64i rv64gc
|
||||
DIRS = $(DIRS32) $(DIRS64)
|
||||
|
||||
# k = 3 6
|
||||
@ -59,63 +52,66 @@ DIRS = $(DIRS32) $(DIRS64)
|
||||
configs: $(CONFIG)
|
||||
$(CONFIG):
|
||||
@echo $(CONFIG)
|
||||
cp -r $(OLDCONFIGDIR)/$(CONFIG) $(CONFIGDIR)/$(CONFIG)_orig
|
||||
sed -i 's/WAYSIZEINBYTES.*/WAYSIZEINBYTES 512/g' $(CONFIGDIR)/$(CONFIG)_orig/wally-config.vh
|
||||
sed -i 's/NUMWAYS.*/NUMWAYS 1/g' $(CONFIGDIR)/$(CONFIG)_orig/wally-config.vh
|
||||
sed -i 's/BPRED_SIZE.*/BPRED_SIZE 5/g' $(CONFIGDIR)/$(CONFIG)_orig/wally-config.vh
|
||||
cp -r $(OLDCONFIGDIR)/shared/*.vh $(CONFIGDIR)
|
||||
cp -r $(OLDCONFIGDIR)/$(CONFIG)/* $(CONFIGDIR)
|
||||
|
||||
ifeq ($(USESRAM), 1)
|
||||
sed -i 's/USE_SRAM.*/USE_SRAM 1/g' $(CONFIGDIR)/wally-shared.vh
|
||||
|
||||
ifneq ($(filter $ $(CONFIG), $(DIRS32)),)
|
||||
sed -i "s/DTIM_RANGE.*/DTIM_RANGE 34\'h01FF/g" $(CONFIGDIR)/$(CONFIG)_orig/wally-config.vh
|
||||
sed -i "s/IROM_RANGE.*/IROM_RANGE 34\'h01FF/g" $(CONFIGDIR)/$(CONFIG)_orig/wally-config.vh
|
||||
sed -i "s/BOOTROM_RANGE.*/BOOTROM_RANGE 34\'h01FF/g" $(CONFIGDIR)/$(CONFIG)_orig/wally-config.vh
|
||||
sed -i "s/UNCORE_RAM_RANGE.*/UNCORE_RAM_RANGE 34\'h01FF/g" $(CONFIGDIR)/$(CONFIG)_orig/wally-config.vh
|
||||
else ifneq ($(filter $ $(CONFIG), $(DIRS64)),)
|
||||
sed -i "s/DTIM_RANGE.*/DTIM_RANGE 56\'h01FF/g" $(CONFIGDIR)/$(CONFIG)_orig/wally-config.vh
|
||||
sed -i "s/IROM_RANGE.*/IROM_RANGE 56\'h01FF/g" $(CONFIGDIR)/$(CONFIG)_orig/wally-config.vh
|
||||
sed -i "s/BOOTROM_RANGE.*/BOOTROM_RANGE 56\'h01FF/g" $(CONFIGDIR)/$(CONFIG)_orig/wally-config.vh
|
||||
sed -i "s/UNCORE_RAM_RANGE.*/UNCORE_RAM_RANGE 56\'h01FF/g" $(CONFIGDIR)/$(CONFIG)_orig/wally-config.vh
|
||||
else
|
||||
sed -i 's/WAYSIZEINBYTES.*/WAYSIZEINBYTES 512/g' $(CONFIGDIR)/wally-config.vh
|
||||
sed -i 's/NUMWAYS.*/NUMWAYS 1/g' $(CONFIGDIR)/wally-config.vh
|
||||
sed -i 's/BPRED_SIZE.*/BPRED_SIZE 5/g' $(CONFIGDIR)/wally-config.vh
|
||||
|
||||
@echo "match32"
|
||||
@echo $(filter $(CONFIG), $(DIRS32))
|
||||
@echo "match64"
|
||||
@echo $(filter $(CONFIG), $(DIRS64))
|
||||
|
||||
ifneq ($(filter $(CONFIG), $(DIRS32)),)
|
||||
sed -i "s/DTIM_RANGE.*/DTIM_RANGE 34\'h01FF/g" $(CONFIGDIR)/wally-config.vh
|
||||
sed -i "s/IROM_RANGE.*/IROM_RANGE 34\'h01FF/g" $(CONFIGDIR)/wally-config.vh
|
||||
sed -i "s/BOOTROM_RANGE.*/BOOTROM_RANGE 34\'h01FF/g" $(CONFIGDIR)/wally-config.vh
|
||||
sed -i "s/UNCORE_RAM_RANGE.*/UNCORE_RAM_RANGE 34\'h01FF/g" $(CONFIGDIR)/wally-config.vh
|
||||
else ifneq ($(filter $(CONFIG), $(DIRS64)),)
|
||||
sed -i "s/DTIM_RANGE.*/DTIM_RANGE 56\'h01FF/g" $(CONFIGDIR)/wally-config.vh
|
||||
sed -i "s/IROM_RANGE.*/IROM_RANGE 56\'h01FF/g" $(CONFIGDIR)/wally-config.vh
|
||||
sed -i "s/BOOTROM_RANGE.*/BOOTROM_RANGE 56\'h01FF/g" $(CONFIGDIR)/wally-config.vh
|
||||
sed -i "s/UNCORE_RAM_RANGE.*/UNCORE_RAM_RANGE 56\'h01FF/g" $(CONFIGDIR)/wally-config.vh
|
||||
else
|
||||
$(info $(CONFIG) does not exist in $(DIRS32) or $(DIRS64))
|
||||
@echo "Config not in list, RAM_RANGE will be unmodified"
|
||||
endif
|
||||
endif
|
||||
|
||||
ifeq ($(MOD), FPUoff)
|
||||
# turn off FPU
|
||||
cp -r $(CONFIGDIR)/$@_orig $(CONFIGDIR)/$@_FPUoff
|
||||
sed -i 's/1 *<< *3/0 << 3/' $(CONFIGDIR)/$@_FPUoff/wally-config.vh
|
||||
sed -i 's/1 *<< *5/0 << 5/' $(CONFIGDIR)/$@_FPUoff/wally-config.vh
|
||||
|
||||
sed -i 's/1 *<< *3/0 << 3/' $(CONFIGDIR)/wally-config.vh
|
||||
sed -i 's/1 *<< *5/0 << 5/' $(CONFIGDIR)/wally-config.vh
|
||||
else ifeq ($(MOD), PMP16)
|
||||
# PMP 16
|
||||
cp -r $(CONFIGDIR)/$@_FPUoff $(CONFIGDIR)/$@_PMP16
|
||||
sed -i 's/PMP_ENTRIES \(64\|16\|0\)/PMP_ENTRIES 16/' $(CONFIGDIR)/$@_PMP16/wally-config.vh
|
||||
|
||||
sed -i 's/PMP_ENTRIES \(64\|16\|0\)/PMP_ENTRIES 16/' $(CONFIGDIR)/wally-config.vh
|
||||
else ifeq ($(MOD), PMP0)
|
||||
# PMP 0
|
||||
cp -r $(CONFIGDIR)/$@_FPUoff $(CONFIGDIR)/$@_PMP0
|
||||
sed -i 's/PMP_ENTRIES \(64\|16\|0\)/PMP_ENTRIES 0/' $(CONFIGDIR)/$@_PMP0/wally-config.vh
|
||||
|
||||
sed -i 's/PMP_ENTRIES \(64\|16\|0\)/PMP_ENTRIES 0/' $(CONFIGDIR)/wally-config.vh
|
||||
else ifeq ($(MOD), noMulDiv)
|
||||
# no muldiv
|
||||
cp -r $(CONFIGDIR)/$@_PMP0 $(CONFIGDIR)/$@_noMulDiv
|
||||
sed -i 's/1 *<< *12/0 << 12/' $(CONFIGDIR)/$@_noMulDiv/wally-config.vh
|
||||
|
||||
sed -i 's/1 *<< *12/0 << 12/' $(CONFIGDIR)/wally-config.vh
|
||||
else ifeq ($(MOD), noPriv)
|
||||
# no priv
|
||||
cp -r $(CONFIGDIR)/$@_noMulDiv $(CONFIGDIR)/$@_noPriv
|
||||
sed -i 's/ZICSR_SUPPORTED *1/ZICSR_SUPPORTED 0/' $(CONFIGDIR)/$@_noPriv/wally-config.vh
|
||||
|
||||
ifeq ($(SAIFPOWER), 1)
|
||||
cp -f ../sim/power.saif .
|
||||
sed -i 's/ZICSR_SUPPORTED *1/ZICSR_SUPPORTED 0/' $(CONFIGDIR)/wally-config.vh
|
||||
endif
|
||||
|
||||
ifeq ($(SAIFPOWER), 1)
|
||||
cp -f ../sim/power.saif .
|
||||
endif
|
||||
|
||||
freqs:
|
||||
@$(foreach freq, $(FREQS), make synth DESIGN=wallypipelinedcore CONFIG=rv32e FREQ=$(freq) MAXCORES=1;)
|
||||
|
||||
mkdirecs:
|
||||
@echo "DC Synthesis"
|
||||
@mkdir -p $(OUTPUTDIR)
|
||||
@mkdir -p $(OUTPUTDIR)/hdl/config
|
||||
@mkdir -p $(OUTPUTDIR)/hdl/config
|
||||
@mkdir -p $(OUTPUTDIR)/hdl
|
||||
@mkdir -p $(OUTPUTDIR)/config
|
||||
@mkdir -p $(OUTPUTDIR)/reports
|
||||
@mkdir -p $(OUTPUTDIR)/mapped
|
||||
@mkdir -p $(OUTPUTDIR)/unmapped
|
||||
|
||||
@ -18,15 +18,13 @@ set_host_options -max_cores $::env(MAXCORES)
|
||||
|
||||
# get outputDir and configDir from environment (Makefile)
|
||||
set outputDir $::env(OUTPUTDIR)
|
||||
set cfg $::env(CONFIGDIR)/$::env(CONFIG)_$::env(MOD)/wally-config.vh
|
||||
set cfg $::env(CONFIGDIR)
|
||||
set hdl_src "../src"
|
||||
set saifpower $::env(SAIFPOWER)
|
||||
set maxopt $::env(MAXOPT)
|
||||
set drive $::env(DRIVE)
|
||||
|
||||
eval file copy -force $cfg {$outputDir/hdl/}
|
||||
eval file copy -force $cfg {$outputDir/}
|
||||
eval file copy -force [glob ${hdl_src}/../config/shared/*.vh] {$outputDir/hdl/}
|
||||
eval file copy -force [glob ${cfg}/*.vh] {$outputDir/hdl/}
|
||||
eval file copy -force [glob ${hdl_src}/*/*.sv] {$outputDir/hdl/}
|
||||
eval file copy -force [glob ${hdl_src}/*/*/*.sv] {$outputDir/hdl/}
|
||||
|
||||
|
||||
@ -1,13 +1,13 @@
|
||||
#!/usr/bin/python3
|
||||
# Madeleine Masser-Frye mmasserfrye@hmc.edu 6/22
|
||||
# Madeleine Masser-Frye mmasserfrye@hmc.edu 1/2023
|
||||
|
||||
import subprocess
|
||||
from multiprocessing import Pool
|
||||
import argparse
|
||||
|
||||
def runSynth(config, mod, tech, freq, maxopt):
|
||||
def runSynth(config, mod, tech, freq, maxopt, usesram):
|
||||
global pool
|
||||
command = "make synth DESIGN=wallypipelinedcore CONFIG={} MOD={} TECH={} DRIVE=FLOP FREQ={} MAXOPT={} MAXCORES=1".format(config, mod, tech, freq, maxopt)
|
||||
command = "make synth DESIGN=wallypipelinedcore CONFIG={} MOD={} TECH={} DRIVE=FLOP FREQ={} MAXOPT={} USESRAM={} MAXCORES=1".format(config, mod, tech, freq, maxopt, usesram)
|
||||
pool.map(mask, [command])
|
||||
|
||||
def mask(command):
|
||||
@ -32,6 +32,7 @@ if __name__ == '__main__':
|
||||
parser.add_argument("-t", "--targetfreq", type=int, help = "Target frequncy")
|
||||
parser.add_argument("-e", "--tech", choices=techs, help = "Technology")
|
||||
parser.add_argument("-o", "--maxopt", action='store_true', help = "Turn on MAXOPT")
|
||||
parser.add_argument("-r", "--usesram", action='store_true', help = "Use SRAM modules")
|
||||
|
||||
args = parser.parse_args()
|
||||
|
||||
@ -39,17 +40,21 @@ if __name__ == '__main__':
|
||||
defaultfreq = 3000 if tech == 'sky90' else 10000
|
||||
freq = args.targetfreq if args.targetfreq else defaultfreq
|
||||
maxopt = int(args.maxopt)
|
||||
mod = 'orig' # until memory integrated
|
||||
usesram = int(args.usesram)
|
||||
mod = 'orig'
|
||||
|
||||
if args.freqsweep:
|
||||
sc = args.freqsweep
|
||||
config = args.version if args.version else 'rv32e'
|
||||
for freq in [round(sc+sc*x/100) for x in freqVaryPct]: # rv32e freq sweep
|
||||
runSynth(config, mod, tech, freq, maxopt)
|
||||
runSynth(config, mod, tech, freq, maxopt, usesram)
|
||||
if args.configsweep:
|
||||
for config in ['rv32i', 'rv64gc', 'rv64i', 'rv32gc', 'rv32imc', 'rv32e']: #configs
|
||||
runSynth(config, mod, tech, freq, maxopt)
|
||||
runSynth(config, mod, tech, freq, maxopt, usesram)
|
||||
if args.featuresweep:
|
||||
config = args.version if args.version else 'rv64gc'
|
||||
for mod in ['FPUoff', 'noMulDiv', 'noPriv', 'PMP0', 'PMP16']: # rv64gc path variations 'orig',
|
||||
runSynth(config, mod, tech, freq, maxopt)
|
||||
runSynth(config, mod, tech, freq, maxopt, usesram)
|
||||
else:
|
||||
config = args.version if args.version else 'rv64gc'
|
||||
runSynth(config, mod, tech, freq, maxopt, usesram)
|
||||
Loading…
Reference in New Issue
Block a user