Removed more *** from lsu and updated assertions for dtim.

src/lsu/dtim.sv

@@ -33,7 +33,6 @@ module dtim import cvw::*;  #(parameter cvw_t P) (
   input  logic                 FlushW,        
   input  logic                 ce,            // Chip Enable.  0: Holds ReadDataWordM
   input  logic [1:0]           MemRWM,        // Read/Write control
-  input  logic [1:0]           MemRWE,        // Read/Write control
   input  logic [P.PA_BITS-1:0] DTIMAdr,       // No stall: Execution stage memory address. Stall: Memory stage memory address
   input  logic [P.LLEN-1:0]    WriteDataM,    // Write data from IEU
   input  logic [P.LLEN/8-1:0]  ByteMaskM,     // Selects which bytes within a word to write

src/lsu/lsu.sv

@@ -245,7 +245,7 @@ module lsu import cvw::*;  #(parameter cvw_t P) (
       .InstrAccessFaultF(), .LoadAccessFaultM(LSULoadAccessFaultM), 
       .StoreAmoAccessFaultM(LSUStoreAmoAccessFaultM), .InstrPageFaultF(), .LoadPageFaultM(LSULoadPageFaultM), 
     .StoreAmoPageFaultM(LSUStoreAmoPageFaultM),
-      .LoadMisalignedFaultM, .StoreAmoMisalignedFaultM,   // *** these faults need to be supressed during hptw.
+      .LoadMisalignedFaultM, .StoreAmoMisalignedFaultM,
       .UpdateDA(DataUpdateDAM), .CMOpM(CMOpM),
       .AtomicAccessM(|LSUAtomicM), .ExecuteAccessF(1'b0), 
       .WriteAccessM, .ReadAccessM(PreLSURWM[1]),
@@ -279,10 +279,7 @@ module lsu import cvw::*;  #(parameter cvw_t P) (
     // The DTIM uses untranslated addresses, so it is not compatible with virtual memory.
     mux2 #(P.PA_BITS) DTIMAdrMux(IEUAdrExtE[P.PA_BITS-1:0], IEUAdrExtM[P.PA_BITS-1:0], MemRWM[0], DTIMAdr);
     assign DTIMMemRWM = SelDTIM & ~IgnoreRequestTLB ? LSURWM : 0;
-    // **** fix ReadDataWordM to be LLEN. ByteMask is wrong length.
+    dtim #(P) dtim(.clk, .reset, .ce(~GatedStallW),
-    // **** create config to support DTIM with floating point.
-    // Add support for cboz
-    dtim #(P) dtim(.clk, .reset, .ce(~GatedStallW), .MemRWE(MemRWE), // *** update when you update the cache RWE
               .MemRWM(DTIMMemRWM),
               .DTIMAdr, .FlushW, .WriteDataM(LSUWriteDataM), 
               .ReadDataWordM(DTIMReadDataWordM[P.LLEN-1:0]), .ByteMaskM(ByteMaskM));

testbench/common/riscvassertions.sv

@@ -59,12 +59,13 @@ module riscvassertions import cvw::*; #(parameter cvw_t P);
     assert ((P.ZIHPM_SUPPORTED == 0) | (P.ZICNTR_SUPPORTED == 1)) else $fatal(1, "ZIPHM_SUPPORTED requires ZICNTR_SUPPORTED");
     assert ((P.ZICBOM_SUPPORTED == 0) | (P.DCACHE_SUPPORTED == 1)) else $fatal(1, "ZICBOM requires DCACHE_SUPPORTED");
     assert ((P.ZICBOZ_SUPPORTED == 0) | (P.DCACHE_SUPPORTED == 1)) else $fatal(1, "ZICBOZ requires DCACHE_SUPPORTED");
+    assert ((P.ZICBOZ_SUPPORTED == 0) | (P.DTIM_SUPPORTED == 0)) else $fatal(1, "ZICBOZ incompatible with DTIM");
     assert ((P.SVPBMT_SUPPORTED == 0) | (P.VIRTMEM_SUPPORTED == 1 & P.XLEN==64)) else $fatal(1, "SVPBMT requires VIRTMEM_SUPPORTED and RV64");
     assert ((P.SVNAPOT_SUPPORTED == 0) | (P.VIRTMEM_SUPPORTED == 1 & P.XLEN==64)) else $fatal(1, "SVNAPOT requires VIRTMEM_SUPPORTED and RV64");
     assert ((P.ZCA_SUPPORTED == 1) | (P.ZCD_SUPPORTED == 0 & P.ZCF_SUPPORTED == 0 & P.ZCB_SUPPORTED == 0)) else $fatal(1, "ZCB, ZCF, or ZCD requires ZCA");
     assert ((P.ZCF_SUPPORTED == 0) | ((P.F_SUPPORTED == 1) & (P.XLEN == 32))) else $fatal(1, "ZCF requires F and XLEN == 32");
     assert ((P.ZCD_SUPPORTED == 0) | (P.D_SUPPORTED == 1)) else $fatal(1, "ZCD requires D");
-    assert ((P.LLEN == P.XLEN) | (P.DCACHE_SUPPORTED)) else $fatal(1, "LLEN > XLEN (D on RV32 or Q on RV64) requires data cache");
+    assert ((P.LLEN == P.XLEN) | (P.DCACHE_SUPPORTED & P.DTIM_SUPPORTED == 0)) else $fatal(1, "LLEN > XLEN (D on RV32 or Q on RV64) requires data cache");
   end
 
 endmodule