core wrapper works

src/wrappers/wallypipelinedcorewrapper.sv

@@ -0,0 +1,56 @@
+///////////////////////////////////////////
+// wallypipelinedcorewrapper.sv
+//
+// Written: Kevin Kim kekim@hmc.edu 21 August 2023
+// Modified: 
+//
+// Purpose: A wrapper to set parameters.  Vivado cannot set the top level parameters because it only supports verilog,
+//          not system verilog.
+// 
+// A component of the Wally configurable RISC-V project.
+// 
+// Copyright (C) 2021 Harvey Mudd College & Oklahoma State University
+//
+// SPDX-License-Identifier: Apache-2.0 WITH SHL-2.1
+//
+// Licensed under the Solderpad Hardware License v 2.1 (the “License”); you may not use this file 
+// except in compliance with the License, or, at your option, the Apache License version 2.0. You 
+// may obtain a copy of the License at
+//
+// https://solderpad.org/licenses/SHL-2.1/
+//
+// Unless required by applicable law or agreed to in writing, any work distributed under the 
+// License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, 
+// either express or implied. See the License for the specific language governing permissions 
+// and limitations under the License.
+////////////////////////////////////////////////////////////////////////////////////////////////
+
+//`include "BranchPredictorType.vh"
+//`include "config.vh"
+
+import cvw::*;
+
+module wallypipelinedcorewrapper (
+   input  logic                  clk, reset,
+   // Privileged
+   input  logic                  MTimerInt, MExtInt, SExtInt, MSwInt,
+   input  logic [63:0]           MTIME_CLINT, 
+   // Bus Interface
+   input  logic [AHBW-1:0]     HRDATA,
+   input  logic                  HREADY, HRESP,
+   output logic                  HCLK, HRESETn,
+   output logic [PA_BITS-1:0]  HADDR,
+   output logic [AHBW-1:0]     HWDATA,
+   output logic [XLEN/8-1:0]   HWSTRB,
+   output logic                  HWRITE,
+   output logic [2:0]            HSIZE,
+   output logic [2:0]            HBURST,
+   output logic [3:0]            HPROT,
+   output logic [1:0]            HTRANS,
+   output logic                  HMASTLOCK
+);
+  `include "parameter-defs.vh"
+
+  wallypipelinedcore  #(P) core(.*); 
+
+endmodule