refactored sim file

wally-pipelined/regression/wally-peripherals-signals.do

@@ -0,0 +1,80 @@
+# wally-peripherals-signals.do 
+#
+# Created by Ben Bracker (bbracker@hmc.edu) on 4 Mar. 2021
+#
+# I really didn't like having to relaunch and recompile an entire sim
+# just because some signal names have changed, so I thought this
+# would be good to factor out.
+
+restart -f
+delete wave /*
+view wave
+
+-- display input and output signals as hexidecimal values
+# Diplays All Signals recursively
+add wave /testbench/clk
+add wave /testbench/reset
+add wave -divider
+add wave /testbench/dut/hart/DataStall
+add wave /testbench/dut/hart/InstrStall
+add wave /testbench/dut/hart/StallF
+add wave /testbench/dut/hart/StallD
+add wave /testbench/dut/hart/FlushD
+add wave /testbench/dut/hart/FlushE
+add wave /testbench/dut/hart/FlushM
+add wave /testbench/dut/hart/FlushW
+
+add wave -divider
+add wave -hex /testbench/dut/hart/ifu/PCF
+add wave -hex /testbench/dut/hart/ifu/InstrF
+add wave /testbench/InstrFName
+#add wave -hex /testbench/dut/hart/ifu/PCD
+add wave -hex /testbench/dut/hart/ifu/InstrD
+add wave /testbench/InstrDName
+add wave -divider
+add wave -hex /testbench/dut/hart/ifu/PCE
+add wave -hex /testbench/dut/hart/ifu/InstrE
+add wave /testbench/InstrEName
+add wave -hex /testbench/dut/hart/ieu/dp/SrcAE
+add wave -hex /testbench/dut/hart/ieu/dp/SrcBE
+add wave -hex /testbench/dut/hart/ieu/dp/ALUResultE
+add wave -divider
+add wave -hex /testbench/dut/hart/ifu/PCM
+add wave -hex /testbench/dut/hart/ifu/InstrM
+add wave /testbench/InstrMName
+add wave /testbench/dut/uncore/dtim/memwrite
+add wave -hex /testbench/dut/uncore/HADDR
+add wave -hex /testbench/dut/uncore/HWDATA
+add wave -divider
+add wave -hex /testbench/dut/hart/ifu/PCW
+add wave /testbench/InstrWName
+add wave /testbench/dut/hart/ieu/dp/RegWriteW
+add wave -hex /testbench/dut/hart/ieu/dp/ResultW
+add wave -hex /testbench/dut/hart/ieu/dp/RdW
+add wave -divider
+add wave -hex /testbench/dut/hart/ebu/*
+add wave -divider
+add wave -hex /testbench/dut/uncore/uart/u/*
+add wave -divider
+#add ww
+add wave -hex -r /testbench/*
+
+-- Set Wave Output Items 
+TreeUpdate [SetDefaultTree]
+WaveRestoreZoom {0 ps} {100 ps}
+configure wave -namecolwidth 250
+configure wave -valuecolwidth 120
+configure wave -justifyvalue left
+configure wave -signalnamewidth 0
+configure wave -snapdistance 10
+configure wave -datasetprefix 0
+configure wave -rowmargin 4
+configure wave -childrowmargin 2
+set DefaultRadix hexadecimal
+
+-- Run the Simulation 
+#run 5000 
+run -all
+#quit
+noview ../testbench/testbench-peripherals.sv
+view wave