Added stalls for pending SFENCE.VMA and FENCE.I in hazard unit

This commit is contained in:
David Harris 2022-06-02 09:37:59 -07:00
parent 154410a37f
commit 1d8bc2dc1b
4 changed files with 25 additions and 24 deletions

View File

@ -32,13 +32,13 @@
module hazard(
// Detect hazards
(* mark_debug = "true" *) input logic BPPredWrongE, CSRWritePendingDEM, RetM, TrapM,
(* mark_debug = "true" *) input logic BPPredWrongE, CSRWriteFencePendingDEM, RetM, TrapM,
(* mark_debug = "true" *) input logic LoadStallD, StoreStallD, MDUStallD, CSRRdStallD,
(* mark_debug = "true" *) input logic LSUStallM, IFUStallF,
(* mark_debug = "true" *) input logic FPUStallD, FStallD,
(* mark_debug = "true" *) input logic DivBusyE,FDivBusyE,
(* mark_debug = "true" *) input logic EcallFaultM, BreakpointFaultM,
(* mark_debug = "true" *) input logic InvalidateICacheM, sfencevmaM, wfiM, IntPendingM,
(* mark_debug = "true" *) input logic wfiM, IntPendingM,
// Stall & flush outputs
(* mark_debug = "true" *) output logic StallF, StallD, StallE, StallM, StallW,
(* mark_debug = "true" *) output logic FlushF, FlushD, FlushE, FlushM, FlushW
@ -46,7 +46,6 @@ module hazard(
logic StallFCause, StallDCause, StallECause, StallMCause, StallWCause;
logic FirstUnstalledD, FirstUnstalledE, FirstUnstalledM, FirstUnstalledW;
logic Fence, PrivilegedFlush;
// stalls and flushes
// loads: stall for one cycle if the subsequent instruction depends on the load
@ -62,7 +61,7 @@ module hazard(
// *** can stalls be pushed into earlier stages (e.g. no stall after Decode?)
assign StallFCause = CSRWritePendingDEM & ~(TrapM | RetM | BPPredWrongE);
assign StallFCause = CSRWriteFencePendingDEM & ~(TrapM | RetM | BPPredWrongE);
// stall in decode if instruction is a load/mul/csr dependent on previous
assign StallDCause = (LoadStallD | StoreStallD | MDUStallD | CSRRdStallD | FPUStallD | FStallD) & ~(TrapM | RetM | BPPredWrongE);
assign StallECause = (DivBusyE | FDivBusyE) & ~(TrapM); // *** can we move to decode stage (KP?)
@ -82,12 +81,10 @@ module hazard(
assign FirstUnstalledW = ~StallW & StallM;
// Each stage flushes if the previous stage is the last one stalled (for cause) or the system has reason to flush
assign Fence = InvalidateICacheM; // | sfencevmaM; // Fences should flush the pipeline and restart *** sfence not working
assign PrivilegedFlush = TrapM | RetM | Fence; // privileged stage change and fences flush pipeline
assign FlushF = BPPredWrongE | Fence;
assign FlushD = FirstUnstalledD | PrivilegedFlush | BPPredWrongE;
assign FlushE = FirstUnstalledE | PrivilegedFlush | BPPredWrongE; // *** why is BPPredWrongE here, but not needed in simple processor
assign FlushM = FirstUnstalledM | PrivilegedFlush;
assign FlushF = BPPredWrongE;
assign FlushD = FirstUnstalledD | TrapM | RetM | BPPredWrongE;
assign FlushE = FirstUnstalledE | TrapM | RetM | BPPredWrongE; // *** why is BPPredWrongE here, but not needed in simple processor
assign FlushM = FirstUnstalledM | TrapM | RetM;
// on Trap the memory stage should be flushed going into the W stage,
// except if the instruction causing the Trap is an ecall or ebreak.
assign FlushW = FirstUnstalledW | (TrapM & ~(BreakpointFaultM | EcallFaultM));

View File

@ -67,7 +67,7 @@ module controller(
output logic RegWriteW, // for datapath and Hazard Unit
output logic [2:0] ResultSrcW,
// Stall during CSRs
output logic CSRWritePendingDEM,
output logic CSRWriteFencePendingDEM,
output logic StoreStallD
);
@ -107,6 +107,8 @@ module controller(
logic IEURegWriteE;
logic IllegalERegAdrD;
logic [1:0] AtomicE;
logic FencePendingD, FencePendingE, FencePendingM;
// Extract fields
assign OpD = InstrD[6:0];
@ -177,6 +179,7 @@ module controller(
assign CSRZeroSrcD = InstrD[14] ? (InstrD[19:15] == 0) : (Rs1D == 0); // Is a CSR instruction using zero as the source?
assign CSRWriteD = CSRReadD & !(CSRZeroSrcD & InstrD[13]); // Don't write if setting or clearing zeros
assign FencePendingD = PrivilegedD & (InstrD[31:25] == 7'b0001001) | FenceD; // possible sfence.vma or fence.i
// ALU Decoding is lazy, only using func7[5] to distinguish add/sub and srl/sra
assign sltD = (Funct3D == 3'b010);
@ -203,9 +206,9 @@ module controller(
flopenrc #(1) controlregD(clk, reset, FlushD, ~StallD, 1'b1, InstrValidD);
// Execute stage pipeline control register and logic
flopenrc #(27) controlregE(clk, reset, FlushE, ~StallE,
{RegWriteD, ResultSrcD, MemRWD, JumpD, BranchD, ALUControlD, ALUSrcAD, ALUSrcBD, ALUResultSrcD, CSRReadD, CSRWriteD, PrivilegedD, Funct3D, W64D, MDUD, AtomicD, InvalidateICacheD, FlushDCacheD, InstrValidD},
{IEURegWriteE, ResultSrcE, MemRWE, JumpE, BranchE, ALUControlE, ALUSrcAE, ALUSrcBE, ALUResultSrcE, CSRReadE, CSRWriteE, PrivilegedE, Funct3E, W64E, MDUE, AtomicE, InvalidateICacheE, FlushDCacheE, InstrValidE});
flopenrc #(28) controlregE(clk, reset, FlushE, ~StallE,
{RegWriteD, ResultSrcD, MemRWD, JumpD, BranchD, ALUControlD, ALUSrcAD, ALUSrcBD, ALUResultSrcD, CSRReadD, CSRWriteD, PrivilegedD, Funct3D, W64D, MDUD, AtomicD, InvalidateICacheD, FlushDCacheD, FencePendingD, InstrValidD},
{IEURegWriteE, ResultSrcE, MemRWE, JumpE, BranchE, ALUControlE, ALUSrcAE, ALUSrcBE, ALUResultSrcE, CSRReadE, CSRWriteE, PrivilegedE, Funct3E, W64E, MDUE, AtomicE, InvalidateICacheE, FlushDCacheE, FencePendingE, InstrValidE});
// Branch Logic
assign {eqE, ltE, ltuE} = FlagsE;
@ -219,16 +222,17 @@ module controller(
assign RegWriteE = IEURegWriteE | FWriteIntE; // IRF register writes could come from IEU or FPU controllers
// Memory stage pipeline control register
flopenrc #(18) controlregM(clk, reset, FlushM, ~StallM,
{RegWriteE, ResultSrcE, MemRWE, CSRReadE, CSRWriteE, PrivilegedE, Funct3E, FWriteIntE, AtomicE, InvalidateICacheE, FlushDCacheE, InstrValidE},
{RegWriteM, ResultSrcM, MemRWM, CSRReadM, CSRWriteM, PrivilegedM, Funct3M, FWriteIntM, AtomicM, InvalidateICacheM, FlushDCacheM, InstrValidM});
flopenrc #(19) controlregM(clk, reset, FlushM, ~StallM,
{RegWriteE, ResultSrcE, MemRWE, CSRReadE, CSRWriteE, PrivilegedE, Funct3E, FWriteIntE, AtomicE, InvalidateICacheE, FlushDCacheE, FencePendingE, InstrValidE},
{RegWriteM, ResultSrcM, MemRWM, CSRReadM, CSRWriteM, PrivilegedM, Funct3M, FWriteIntM, AtomicM, InvalidateICacheM, FlushDCacheM, FencePendingM, InstrValidM});
// Writeback stage pipeline control register
flopenrc #(4) controlregW(clk, reset, FlushW, ~StallW,
{RegWriteM, ResultSrcM},
{RegWriteW, ResultSrcW});
assign CSRWritePendingDEM = CSRWriteD | CSRWriteE | CSRWriteM;
// Stall pipeline at Fetch if a CSR Write or Fence is pending in the subsequent stages
assign CSRWriteFencePendingDEM = CSRWriteD | CSRWriteE | CSRWriteM | FencePendingD | FencePendingE | FencePendingM;
assign StoreStallD = MemRWE[0] & ((|MemRWD) | (|AtomicD));
endmodule

View File

@ -71,7 +71,7 @@ module ieu (
output logic FPUStallD, LoadStallD, MDUStallD, CSRRdStallD,
output logic PCSrcE,
output logic CSRReadM, CSRWriteM, PrivilegedM,
output logic CSRWritePendingDEM,
output logic CSRWriteFencePendingDEM,
output logic StoreStallD
);
@ -99,7 +99,7 @@ module ieu (
.Funct3E, .MDUE, .W64E, .JumpE, .StallM, .FlushM, .MemRWM,
.CSRReadM, .CSRWriteM, .PrivilegedM, .SCE, .AtomicM, .Funct3M,
.RegWriteM, .InvalidateICacheM, .FlushDCacheM, .InstrValidM, .FWriteIntM,
.StallW, .FlushW, .RegWriteW, .ResultSrcW, .CSRWritePendingDEM, .StoreStallD);
.StallW, .FlushW, .RegWriteW, .ResultSrcW, .CSRWriteFencePendingDEM, .StoreStallD);
datapath dp(
.clk, .reset, .ImmSrcD, .InstrD, .StallE, .FlushE, .ForwardAE, .ForwardBE,

View File

@ -82,7 +82,7 @@ module wallypipelinedcore (
logic StoreAmoMisalignedFaultM, StoreAmoAccessFaultM;
logic InvalidateICacheM, FlushDCacheM;
logic PCSrcE;
logic CSRWritePendingDEM;
logic CSRWriteFencePendingDEM;
logic DivBusyE;
logic LoadStallD, StoreStallD, MDUStallD, CSRRdStallD;
logic SquashSCW;
@ -231,7 +231,7 @@ module wallypipelinedcore (
.FPUStallD, .LoadStallD, .MDUStallD, .CSRRdStallD,
.PCSrcE,
.CSRReadM, .CSRWriteM, .PrivilegedM,
.CSRWritePendingDEM, .StoreStallD
.CSRWriteFencePendingDEM, .StoreStallD
); // integer execution unit: integer register file, datapath and controller
@ -294,13 +294,13 @@ module wallypipelinedcore (
hazard hzu(
.BPPredWrongE, .CSRWritePendingDEM, .RetM, .TrapM,
.BPPredWrongE, .CSRWriteFencePendingDEM, .RetM, .TrapM,
.LoadStallD, .StoreStallD, .MDUStallD, .CSRRdStallD,
.LSUStallM, .IFUStallF,
.FPUStallD, .FStallD,
.DivBusyE, .FDivBusyE,
.EcallFaultM, .BreakpointFaultM,
.InvalidateICacheM, .sfencevmaM, .wfiM, .IntPendingM,
.wfiM, .IntPendingM,
// Stall & flush outputs
.StallF, .StallD, .StallE, .StallM, .StallW,
.FlushF, .FlushD, .FlushE, .FlushM, .FlushW