cvw/pipelined/src/ebu/buscachefsm.sv

163 lines
6.5 KiB
Systemverilog
Raw Normal View History

///////////////////////////////////////////
// busfsm.sv
//
// Written: Ross Thompson ross1728@gmail.com December 29, 2021
// Modified:
//
// Purpose: Load/Store Unit's interface to BUS for cacheless system
//
// A component of the Wally configurable RISC-V project.
//
// Copyright (C) 2021 Harvey Mudd College & Oklahoma State University
//
// MIT LICENSE
// Permission is hereby granted, free of charge, to any person obtaining a copy of this
// software and associated documentation files (the "Software"), to deal in the Software
// without restriction, including without limitation the rights to use, copy, modify, merge,
// publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons
// to whom the Software is furnished to do so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all copies or
// substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
// INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
// PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
// BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
// TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
// OR OTHER DEALINGS IN THE SOFTWARE.
////////////////////////////////////////////////////////////////////////////////////////////////
`include "wally-config.vh"
// HCLK and clk must be the same clock!
2022-08-31 19:49:08 +00:00
module buscachefsm #(parameter integer WordCountThreshold,
parameter integer LOGWPL, parameter logic CACHE_ENABLED )
(input logic HCLK,
input logic HRESETn,
// IEU interface
input logic [1:0] RW,
input logic CPUBusy,
output logic BusCommitted,
output logic BusStall,
output logic CaptureEn,
// cache interface
input logic [1:0] CacheRW,
output logic CacheBusAck,
// lsu interface
output logic SelUncachedAdr,
output logic [LOGWPL-1:0] WordCount, WordCountDelayed,
output logic SelBusWord,
// BUS interface
input logic HREADY,
output logic [1:0] HTRANS,
output logic HWRITE,
output logic [2:0] HBURST
);
typedef enum logic [2:0] {ADR_PHASE,
DATA_PHASE,
MEM3,
CACHE_FETCH,
CACHE_EVICT} busstatetype;
typedef enum logic [1:0] {AHB_IDLE = 2'b00, AHB_BUSY = 2'b01, AHB_NONSEQ = 2'b10, AHB_SEQ = 2'b11} ahbtranstype;
(* mark_debug = "true" *) busstatetype CurrState, NextState;
logic [LOGWPL-1:0] NextWordCount;
logic FinalWordCount;
logic [2:0] LocalBurstType;
logic WordCntEn;
logic WordCntReset;
logic CacheAccess;
always_ff @(posedge HCLK)
if (~HRESETn) CurrState <= #1 ADR_PHASE;
else CurrState <= #1 NextState;
always_comb begin
case(CurrState)
ADR_PHASE: if(HREADY & |RW) NextState = DATA_PHASE;
else if (HREADY & CacheRW[0]) NextState = CACHE_EVICT;
else if (HREADY & CacheRW[1]) NextState = CACHE_FETCH;
else NextState = ADR_PHASE;
DATA_PHASE: if(HREADY) NextState = MEM3;
else NextState = DATA_PHASE;
MEM3: if(CPUBusy) NextState = MEM3;
else NextState = ADR_PHASE;
CACHE_FETCH: if(HREADY & FinalWordCount) NextState = ADR_PHASE;
else NextState = CACHE_FETCH;
CACHE_EVICT: if(HREADY & FinalWordCount) NextState = ADR_PHASE;
else NextState = CACHE_EVICT;
default: NextState = ADR_PHASE;
endcase
end
// IEU, LSU, and IFU controls
flopenr #(LOGWPL)
WordCountReg(.clk(HCLK),
.reset(~HRESETn | WordCntReset),
.en(WordCntEn),
.d(NextWordCount),
.q(WordCount));
// Used to store data from data phase of AHB.
flopenr #(LOGWPL)
WordCountDelayedReg(.clk(HCLK),
.reset(~HRESETn | WordCntReset),
.en(WordCntEn),
.d(WordCount),
.q(WordCountDelayed));
assign NextWordCount = WordCount + 1'b1;
assign FinalWordCount = WordCountDelayed == WordCountThreshold[LOGWPL-1:0];
assign WordCntEn = ((NextState == CACHE_EVICT | NextState == CACHE_FETCH) & HREADY) |
(NextState == ADR_PHASE & |CacheRW & HREADY);
assign WordCntReset = NextState == ADR_PHASE;
assign CaptureEn = (CurrState == DATA_PHASE & RW[1]) | (CurrState == CACHE_FETCH & HREADY);
assign CacheAccess = CurrState == CACHE_FETCH | CurrState == CACHE_EVICT;
assign BusStall = (CurrState == ADR_PHASE & (|RW | |CacheRW)) |
//(CurrState == DATA_PHASE & ~RW[0]) | // replace the next line with this. Fails uart test but i think it's a test problem not a hardware problem.
(CurrState == DATA_PHASE) |
(CurrState == CACHE_FETCH) |
(CurrState == CACHE_EVICT);
assign BusCommitted = CurrState != ADR_PHASE;
assign SelUncachedAdr = (CurrState == ADR_PHASE & |RW) |
(CurrState == DATA_PHASE) |
(CurrState == MEM3);
// AHB bus interface
assign HTRANS = (CurrState == ADR_PHASE & HREADY & (|RW | |CacheRW)) |
(CurrState == DATA_PHASE & ~HREADY) ? AHB_NONSEQ :
2022-09-04 19:52:40 +00:00
// (CacheAccess & |WordCount) ? AHB_SEQ : AHB_IDLE; /// this line is for burst
(CacheAccess & |WordCount) ? AHB_NONSEQ : AHB_IDLE;
assign HWRITE = RW[0] | CacheRW[0];
2022-09-04 19:52:40 +00:00
// assign HBURST = (|CacheRW) ? LocalBurstType : 3'b0; // this line is for burst.
// try disabling burst as it is not working with the fpga.
assign HBURST = 3'b0;
always_comb begin
case(WordCountThreshold)
0: LocalBurstType = 3'b000;
3: LocalBurstType = 3'b011; // INCR4
7: LocalBurstType = 3'b101; // INCR8
15: LocalBurstType = 3'b111; // INCR16
default: LocalBurstType = 3'b001; // INCR without end.
endcase
end
// communication to cache
assign CacheBusAck = (CacheAccess & HREADY & FinalWordCount);
assign SelBusWord = (CurrState == ADR_PHASE & (RW[0] | CacheRW[0])) |
(CurrState == DATA_PHASE & RW[0]) |
(CurrState == CACHE_EVICT);
endmodule