cvw/pipelined/src/fpu/fhazard.sv

///////////////////////////////////////////
// fhazard.sv
//
// Written: me@KatherineParry.com 19 May 2021
// Modified: 
//
// Purpose: Determine forwarding, stalls and flushes for the FPU
// 
// A component of the CORE-V-WALLY configurable RISC-V project.
// 
// Copyright (C) 2021-23 Harvey Mudd College & Oklahoma State University
//
// SPDX-License-Identifier: Apache-2.0 WITH SHL-2.1
//
// Licensed under the Solderpad Hardware License v 2.1 (the “License”); you may not use this file 
// except in compliance with the License, or, at your option, the Apache License version 2.0. You 
// may obtain a copy of the License at
//
// https://solderpad.org/licenses/SHL-2.1/
//
// Unless required by applicable law or agreed to in writing, any work distributed under the 
// License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, 
// either express or implied. See the License for the specific language governing permissions 
// and limitations under the License.
////////////////////////////////////////////////////////////////////////////////////////////////

`include "wally-config.vh"

module fhazard(
    input  logic [4:0]  Adr1D, Adr2D, Adr3D,    // read data adresses
    input  logic [4:0]  Adr1E, Adr2E, Adr3E,    // read data adresses
    input  logic        FRegWriteE, FRegWriteM, FRegWriteW, // is the fp register being written to
    input  logic [4:0]  RdE, RdM, RdW,               // the adress being written to
    input  logic [1:0]  FResSelM,            // the result being selected
    input  logic        XEnD, YEnD, ZEnD,
    output logic        FPUStallD,                // stall the decode stage
    output logic [1:0]  ForwardXE, ForwardYE, ForwardZE // select a forwarded value
);

  logic                 MatchDE;

  // Decode-stage instruction source depends on result from execute stage instruction
  assign MatchDE = ((Adr1D == RdE) & XEnD) | ((Adr2D == RdE) & YEnD) | ((Adr3D == RdE) & ZEnD);
  assign FPUStallD = MatchDE & FRegWriteE;
  
  always_comb begin
    // set defaults
    ForwardXE = 2'b00; // choose FRD1E
    ForwardYE = 2'b00; // choose FRD2E
    ForwardZE = 2'b00; // choose FRD3E

    // if the needed value is in the memory stage - input 1
    if ((Adr1E == RdM) & FRegWriteM) begin
      // if the result will be FResM (can be taken from the memory stage)
      if(FResSelM == 2'b00) ForwardXE = 2'b10; // choose FResM
      // if the needed value is in the writeback stage
    end else if ((Adr1E == RdW) & FRegWriteW) ForwardXE = 2'b01; // choose FResult64W
  

    // if the needed value is in the memory stage - input 2
    if ((Adr2E == RdM) & FRegWriteM) begin
      // if the result will be FResM (can be taken from the memory stage)
      if(FResSelM == 2'b00) ForwardYE = 2'b10; // choose FResM
      // if the needed value is in the writeback stage
    end else if ((Adr2E == RdW) & FRegWriteW) ForwardYE = 2'b01; // choose FResult64W


    // if the needed value is in the memory stage - input 3
    if ((Adr3E == RdM) & FRegWriteM) begin
      // if the result will be FResM (can be taken from the memory stage)
      if(FResSelM == 2'b00) ForwardZE = 2'b10; // choose FResM
      // if the needed value is in the writeback stage
    end else if ((Adr3E == RdW) & FRegWriteW) ForwardZE = 2'b01; // choose FResult64W

  end 

endmodule